2. Add Points by point creation tool or add by insert file as land desktop xml document. 3. Create surface by surface creation tool and add point groups in surface defenition. 4. Create alignment by alignment creation tool. 5.Create surface profile by surface profile creation tool at selected alignment. 6. Create proposed profile at generated surface profile alignment by tangent curve tool. 7.Create Assembly and add subassemblies to create final geometrical section of corridor. 8. Create corridor by choosing alignment, assembly, target surface. 9. Now add surfaces of corridor in properties-->surfaces by selecting links of corridor model. 10.Create sample line group by adding existing ground surface and datum surfaces for earthwork calculations req computations at prdetermined intervals and left/right swath widths. 11. Now generate quantity takeoff criterion at settings-->quantity cutoff crit--- >Earthwork and generate material lists by choosing surfaces as ground and datum surfaces req for earthwork comput. 12. Now select any sample line and compute material calculations for selected alignment and sample line group and add quantity cutoff criterion and accordingly select surfaces for computation and generate report.