You are on page 1of 2

TOPKRETE™

Deckrete BS
Basement Car Park Flooring
(2 mm)

Description
Deckrete BS is a solvent free polyurethane car park
deck coating system to provide flexible, crack resistant
and hydrostatic pressure resistant for basement car
park floor.

Physical Properties
Uses Compressive Strength 65 N/mm2
Deckrete BS is used for basement car park deck (ASTM C 109)
where a decorative appearance, durable, and anti-slip Adhesive Strength >3.5 N/mm2
properties are required. (ASTM C 321)
Shore D Hardness 70
(ASTM D 2240)
Advantage Elongation 70%
 A esthetically attractive (ASTM D412)
 Reduces tyre noise Hydrostatic Pressure 36 psi
 Hard wearing Resistant (CRD-C-48-73) (2.5 bar)
 Anti-slip Abrasion Resistant 40 mg/1000
 Fire resistant (ASTM D 1044) Taber CS-10 cycles/1kg
 Solvent free TRRL Slip Resistance 80 Dry
 Excellent bond strength (BS 7976) 45 Wet
 Resistant to cracking
 Withstand hydrostatic pressure System Design
– (which is of 25m head of water)

Standard Colour

Specification Detail Coverage


Deckrete MB 0.6 kg/m²
Deckrete FC 0.6 kg/m²
Quartz 2.0 kg/m²
Deckrete SC 0.7 kg/m²
Health & Safety
Specification Detail Coverage For further information, refer to the product Material
Deckrete MB 0.6 kg/m² Safety Data Sheet, available upon request.
Deckrete FC 0.6 kg/m²
Warranty
Quartz 2.0 kg/m²
Deckrete SC 0.7 kg/m² Topkrete Sdn Bhd warrants that the products
manufactured by it shall be free from material defects
Substrate Requirements and will conform to formulation standards and contain
Concrete or screed substrate should be a minimum of all components in their proper proportion. Should any
of the products be proven defective, the liability to
25 N/mm2, free from dust, loose particles and TOPKRETE SDN BHD shall be limited to replacement
contaminants such as oils, fats, greases, paint of the material proven to be defective, and TOPKRETE
residues, chemicals, algae and laitance. Substrate SDN BHD shall in no case be liable otherwise or for
moisture levels should be no greater than 75% RH. incidental or consequential damages. TOPKRETE
BS 8204 SR 2 – 5 mm at every 3 meter. SDN BHD MAKES NO WARRANTY AS TO
MERCHANTABILITY OR FITNESS FOR A
Application PARTICULAR PURPOSE AND THIS
Please read Deckrete BS Method Statement for WARRANTY IS IN LIEU OF ALL OTHER
requirements of surface preparation, mixing and WARRANTIES EXPRESSED OR IMPLIED. User
shall determine the suitability of the product for its
application. intended use and assume all risks and liability in
connection therewith.
Cure Schedule 35°C
Important note
Light Traffic 12 hours
Full Traffic 24 hours Topkrete products are guaranteed against defective
Full Chemicals Cure 5 days materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of
Maintenance which may be obtained on request. Whilst Topkrete
Regular cleaning of Deckrete BS may be carried out endeavors to ensure that any advice,
using a rotary scrubbing machine with a water recommendation, specification or information it may
give is accurate and correct, it shall not, because it
miscible cleaning agent.
has no direct or continuous control over where or
Temperature Resistance how its products are applied, accept any liability
either directly or indirectly arising from the use of its
Deckrete BS is resistant to temperature cycles up to
products, whether or not in accordance with any
70oC. Extended periods at these temperature and advice, specification, recommendation or information
above will make material susceptible to chemical given by it.
attack and abrasion wear.
Topkrete Sdn Bhd (597943-M)
Chemical Resistance
Examination for this was made with six common Office : 19-G, Blok A, Jalan Atmosphere 3,
chemicals:- Pusat Perniagaan Atmosphere,
 engine oil (used) Bandar Putra Permai,
 brake fluid 43300 Seri Kembangan,
 anti-freeze mixture Selangor Darul Ehsan. Malaysia
 saturated salt water Tel: +603- 8957 8999 Fax: +603-8959
 battery acid 1661
 petrol Email: info@topkrete.com
www.topkrete.com
Technical Support
Factory : No.3, Jalan Utama 1/12,
TOPKRETE offers a comprehensive range of high
Taman Perindustrian Puchong Utama,
performance, quality products. TOPKRETE offers a 47100 Puchong,
technical support package to specifiers and Selangor Darul Ehsan. Malaysia.
contractors which include assistance with product Tel : +603-80631883 Fax: +603-80631983
selection and technical advice from staff with
unrivalled experience in the industry.

You might also like