Professional Documents
Culture Documents
PRODUCT CHARACTERISTICS:
• Excellent crack bridging Ability.
• Good water uptake and Good water vapor transmission resistance.
• Attractive appearance with a Fine Silk Finish.
• Anti-Carbonation Properties.
• Excellent hiding power.
• Easy application properties.
RECOMMENDED USE:
Exterior Surfaces Use.
For Concrete, Gypsum board, Cement Plaster, etc.
TECHNICAL DATA:
Finish Silk Sheen
Viscosity 100 10 gm/cm2 (at 25°C temperature and 50% humidity)
Density 1.4 0.05 gm./cm³ (at 25°C and RH 50%) for white color
(As per ASTM D 1475-13).
Solid by volume % 47 2% (for white color).
Flash Point Non flammable
V.O.C 36 gm./L (as per EPA Method 24).
CERTIFICATE:
- SI-TECH XTR TEXTURE-SO provides a maximum crack bridging ability of 2.3 mm
according to: VINCI TECHNOLOGY CENTRE UK LIMITED.
- SI-TECH XTR TEXTURE-SO meets the requirements for Class A4 as per BS EN 1062-7
APPLICATION DATA:
Thinner Water
Thinning ratio by volume % Maximum 10%
Application tools Roller, Putty knife or spray or steel trowel.
DRYING TIME:
Drying time is generally related to air circulation, temperature, film thickness, selected colors and
number of coats. Figures given in the table are testing at 25°C and 50% RH:
STORAGE:
• Shelf life is two years from production date.
• The product must be stored in accordance with national regulations.
• The product must be kept in cool well ventilated place, protected from sunlight and heat.
• Containers must be kept tightly closed after partial usage.
CLARIFICATION:
The information in this Technical Specification is given to the best of our knowledge. It is based
on laboratory tests and practical experience. Sipes takes no responsibility for consequences of
breaching the instructions. The Company reserves the right to change data herein without
notice.
REMARKS:
1-Contents of packaging with different batch numbers must be mixed together before use.
2- Coverage of colors obtained from tinting machines depends on the selected colors.