TMB15 is a hydraulic, self-propelled, crawler based surface drilling rig,
equipped with an ergonomic cabin (F.O.P.S. and R.O.P.S. certified) and rod handling system. The noise level in the cabin is less than 80 dB (A). Typical applications for TMB15 are road cutting, foundation drilling and as well production drilling in medium size quarries. Therefore TMB15 is most often used by construction contractors and quarries. It drills vertical, inclined or horizontal holes with a diameter of 64 - 102 mm (2½" – 3½ ") utilizing 38 or 45 mm (1 ½", 1 ¾") extension rods. TMB15 is equipped with hydraulic top hammer rock drill DF550S, with high rotation torque. The rock drill and rigid boom are mounted on the chassis. The Power pack of TMB15 consists of a Cummins diesel engine wit axial piston pump and gear pumps and flushing air compressor.
Drilling Coverage Technical data
Transport dimensions Feed
Length (mm) 8300 Type CF 160 Width (mm) 2430 Drill rod length (mm) 3050, 3660 Height (mm) 2945 Feed pull out force (KN) 25 Weight (kg) approx. 11000 Rod changer Crawler Type Revolver Tramming speed (km/h) 2,1 / 3,5 Capacity 5 Climbing ability (%) approx. 60 Steel length (mm) 3050, 3660 Oscillation angles (°) +10/- 10 Rod diameter (mm) 38, 45 Ground clearance (mm) 496 Ground pressure (KN/m²) 66,7 Drifter Type DF 550S Power pack Weight (kg) ca.152 Engine Cummins QSB 4.5 -C160 Impact rate (KW) 18 Power (KW) 119 Rotary speed (1/min) 100-200 Speed (1/min) 2200 Torque (Nm) max.1300
Compressor-Type GHH Dust Collector
Air flushing capacity (m³/min) 5,7 Type Ilmeg X-125 Flushing air pressure (bar) up to 10 Filter elements 2 Filter surface (m²) 8,0 Fuel capacity (l) 320 Weight (kg) 160 Hydraulic fuel capacity (l) 250 Options Boom Telescopic boom Type TBF15 Angle inclinometer with depth Feed extension travel (mm) 1500 meter Feed up/down (ca°) 32/ 30 Pre – separator Feed left/right (ca°) each 45 Feed tilt (°) 120 Feed swing (°) 115