Professional Documents
Culture Documents
Pile drilling
Content
Kelly-System
3
1 2 3
Bohreimer
Kelly bars Augers Drilling buckets
Drill bucket
5 6
4 5 6
7 8 9X
Belling buckets
10 X 11 X 12 X
Augers for horizontal
CFA-System drilling system Displacement
FOW-System hollow stem auger
Augers for vertical
drilling system
X At the present time we are up-dating the content of the marked chapters.
In case of demand please contact our sales department.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
MD 25 / 4 / 75
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
Technical data
D SW 130
B = extended length
SW 150
SW 200
accessories
A A A
B B B
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
The drill depth (BT) is not equal to the extended length (B) of the
Kelly bar. It is due to following parameters:
Z
Example
V
Max. drilling depth (BT) 25 m
- Length of the drilling tool (Y) - 1,5 m
+ Construction height for the rotary drive incl. +1m
cardanic joint and shock absorber on top of
the rotary drive (X)
+ Length of the casing drive adapter (Z) +2m
B
+ Height of the casing oscillator (V) + 0,5 m
= min. extended length 27,0 m
BT
Here is provided that the pull down system of the rig could drive the
bottom of the casing drive adapter to the upper face of the casing
oscillator.
ATTENTION!
Y
Transport length (A) must be smaller than the „Hang-in-length“
(C) of the rig.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Torque 100 kNm
Denomination
Torque (kNm) total
Number of tubes Weight
B (m) A (mm) D (mm) (kg) Article-No.
100 2 16 9500 292 3,350 500.3001
19 1100 292 3,650 500.3002
22 12500 292 3,950 500.3003
25 14000 292 4,250 500.3004
28 15500 292 4,550 500.3005
100 3 26 10450 292 3,750 500.3006
29 11450 292 4,150 500.3007
32 12450 292 4,450 500.3008
35 13450 292 4,850 500.3009
38 14450 292 5,250 500.3010
100 4 35 10650 343 4,650 500.3011
39 11650 343 5,050 500.3012
43 12650 343 5,550 500.3013
47 13650 343 5,950 500.3014
51 14650 343 6,350 500.3015
55 16050 343 6,800 500.3016
59 17050 343 7,200 500.3017
63 18050 343 7,600 500.3018
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Kelly bars
Mr. Musterman
Person of response Muster Co- LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, England
Address (0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
Denomination MD 25 / 4 / 75
Type Friction type Interlocking type X
SW130 SW150 SW200 X Nominal
A B ØD
drilling
(mm) (mm) (mm)
depth
Øk
SW
________250_____ ________300_______
A = dimension of transportation
_________4______ ________3x3______
Shock absorber on
Number of guide rails
top
________3x2_____ Yes X No
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Person of response
Company
Department
Address
Denomination
Type Friction type Interlocking type
SW130 SW150 SW200 Nominal
A B ØD
drilling
(mm) (mm) (mm)
depth
Øk
SW
________________ _________________
A = dimension of transportation
________________ __________________
Shock absorber on
Number of guide rails
top
________________ Yes No
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
Denomination of Augers
BS Augers (cylindric)
Addition:
BSP Augers (tapered) - RM (round shank bits)
- FM (flat teeth)
- OP (without pilot)
- K (calibration collar)
S heavy soil/rock
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
Technical data
• single start
SW
BSES BSES-K
ØD alloy steel edge+RM-pilot auger with calibrating collar
• double start
SW
P
Center pipe Ø
BSZN-FM BSZN-RM
flat teeth+fish tail pilot round shank bits+RM-pilot
NL
BSZS BSZS-OP
ØD alloy steel edge+RM-pilot auger without pilot
Center pipe Ø
NL
BSPS
with round shank bits+RM-pilot
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 0204/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
BSEN-FM BSEN-RM
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø D (mm)
Casing-Ø (mm) Kellybox-SW/ Teeth Weight Article- Teeth Weight Article-
P (mm) Center pipe-Ø FM RM (kg) No. FM RM (kg) No.
130/203 500.3101 500.3151
500 600/520 250 150/229
2 1 255 500.3102
- 3 255 500.3152
130/203 500.3103 500.3153
520 620/540 250 150/229 2 1 380 500.3104 - 4 380 500.3154
200/229 500.3105 500.3155
130/203 500.3106 500.3156
600 700/620 300 150/229 3 1 440 500.3107 - 5 440 500.3157
200/229 500.3108 500.3158
130/203 500.3109 500.3159
650 750/670 325 150/229 3 2 560 500.3110 - 5 560 500.3160
200/229 500.3111 500.3161
130/203 500.3112 500.3162
700 800/720 325 150/229 4 2 605 500.3113 - 5 600 500.3163
200/229 500.3114 500.3164
130/203 500.3115 500.3165
780 880/800 375 150/229 4 2 670 500.3116 - 6 665 500.3166
200/229 500.3117 500.3167
130/203 500.3118 500.3168
800 900/820 375 150/229 4 2 690 500.3119 - 6 685 500.3169
200/229 500.3120 500.3170
130/203 500.3121 500.3171
900 1000/920 450 150/229 5 2 830 500.3122 - 7 825 500.3172
200/229 500.3123 500.3173
130/203 500.3124 500.3174
970 1080/1000 450 150/229 5 2 895 500.3125 - 8 890 500.3175
200/229 500.3126 500.3176
130/203 500.3127 500.3177
1060 1180/1100 500 150/229 6 2 910 500.3128 - 8 905 500.3178
200/229 500.3129 500.3179
130/203 500.3130 500.3180
1080 1200/1120 500 150/229 6 2 925 500.3131 - 8 910 500.3181
200/229 500.3132 500.3182
130/203 500.3133 500.3183
1180 1300/1220 550 150/229 7 2 935 500.3134 - 9 930 500.3184
200/229 500.3135 500.3185
130/203 500.3136 500.3186
1350 1500/1400 600 150/229 8 2 1170 500.3137 - 12 1165 500.3187
200/229 500.3138 500.3188
130/203 500.3139 500.3189
1650 1800/1700 700 150/229 10 2 1560 500.3140 - 14 1550 500.3190
200/229 500.3141 500.3191
130/203 500.3142 500.3192
1800 2000/1880 800 150/229 11 2 1700 500.3143 - 16 1690 500.3193
200/229 500.3144 500.3194
130/203 500.3145 500.3195
2000 2200/2080 800 150/229 12 2 1890 500.3146 - 16 1880 500.3196
200/229 500.3147 500.3197
130/203 500.3148 500.3198
2300 2500/2380 800 150/229 14 2 2175 500.3149 - 18 2160 500.3199
200/229 500.3150 500.3200
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 0204/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
BSES BSES-K
Single start Augers low cohesive, medium to coarse graded compacted gravel and soil, brittle medium
hard rock
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø D (mm)
Casing-Ø (mm) Kellybox-SW/ Teeth Weight Article- Teeth Weight Article-
P (mm) Center pipe-Ø FM RM (kg) No. FM RM (kg) No.
130/203 500.3201 500.3251
500 600/520 250 150/229
- 5 280 500.3202
- 8 300 500.3252
130/203 500.3203 500.3253
520 620/540 250 150/229 - 6 400 500.3204 - 9 440 500.3254
200/229 500.3205 500.3255
130/203 500.3206 500.3256
600 700/620 300 150/229 - 7 490 500.3207 - 10 530 500.3257
200/229 500.3208 500.3258
130/203 500.3209 500.3259
650 750/670 325 150/229 - 7 610 500.3210 - 10 650 500.3260
200/229 500.3211 500.3261
130/203 500.3212 500.3262
700 800/720 325 150/229 - 7 660 500.3213 - 10 710 500.3263
200/229 500.3214 500.3264
130/203 500.3215 500.3265
780 880/800 375 150/229 - 8 730 500.3216 - 12 790 500.3266
200/229 500.3217 500.3267
130/203 500.3218 500.3268
800 900/820 375 150/229 - 8 750 500.3219 - 12 810 500.3269
200/229 500.3220 500.3270
130/203 500.3221 500.3271
900 1000/920 450 150/229 - 9 900 500.3222 - 13 980 500.3272
200/229 500.3223 500.3273
130/203 500.3224 500.3274
970 1080/1000 450 150/229 - 9 970 500.3225 - 13 1060 500.3275
200/229 500.3226 500.3276
130/203 500.3227 500.3277
1060 1180/1100 500 150/229 - 10 990 500.3228 - 14 1090 500.3278
200/229 500.3229 500.3279
130/203 500.3230 500.3280
1080 1200/1120 500 150/229 - 10 1000 500.3231 - 14 1110 500.3281
200/229 500.3232 500.3282
130/203 500.3233 500.3283
1180 1300/1220 550 150/229 - 12 1030 500.3234 - 15 1160 500.3284
200/229 500.3235 500.3285
130/203 500.3236 500.3286
1350 1500/1400 600 150/229 - 14 1270 500.3237 - 18 1430 500.3287
200/229 500.3238 500.3288
130/203 500.3239 500.3289
1650 1800/1700 700 150/229 - 16 1680 500.3240 - 19 1900 500.3290
200/229 500.3241 500.3291
130/203 500.3242 500.3292
1800 2000/1880 800 150/229 - 18 1840 500.3243 - 22 2120 500.3293
200/229 500.3244 500.3294
130/203 500.3245 500.3295
2000 2200/2080 800 150/229 - 18 2050 500.3246 - 22 2360 500.3296
200/229 500.3247 500.3297
130/203 500.3248 500.3298
2300 2500/2380 800 150/229 - 20 2350 500.3249 - 24 2700 500.3299
200/229 500.3250 500.3300
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
BSZN-FM BSZN-RM
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø D (mm)
Casing-Ø (mm) Kellybox-SW/ Teeth Weight Article- Teeth Weight Article-
P (mm) Center pipe-Ø FM RM (kg) No. FM RM (kg) No.
130/203 500.3301 500.3351
500 600/520 250 150/229
4 2 310 500.3302
- 6 290 500.3352
130/203 500.3303 500.3353
520 620/540 250 150/229 4 2 440 500.3304 - 8 430 500.3354
200/229 500.3305 500.3355
130/203 500.3306 500.3356
600 700/620 300 150/229 6 2 510 500.3307 - 10 250 500.3357
200/229 500.3308 500.3358
130/203 500.3309 500.3359
650 750/670 325 150/229 6 4 660 500.3310 - 10 650 500.3360
200/229 500.3311 500.3361
130/203 500.3312 500.3362
700 800/720 325 150/229 8 4 720 500.3313 - 10 710 500.3363
200/229 500.3314 500.3364
130/203 500.3315 500.3365
780 880/800 375 150/229 8 4 810 500.3316 - 12 780 500.3366
200/229 500.3317 500.3367
130/203 500.3318 500.3368
800 900/820 375 150/229 8 4 830 500.3319 - 12 820 500.3369
200/229 500.3320 500.3370
130/203 500.3321 500.3371
900 1000/920 450 150/229 10 4 1000 500.3322 - 14 990 500.3372
200/229 500.3323 500.3373
130/203 500.3324 500.3374
970 1080/1000 450 150/229 10 4 1090 500.3325 - 14 1070 500.3375
200/229 500.3326 500.3376
130/203 500.3327 500.3377
1060 1180/1100 500 150/229 12 4 1140 500.3328 - 16 1120 500.3378
200/229 500.3329 500.3379
130/203 500.3330 500.3380
1080 1200/1120 500 150/229 12 4 1160 500.3331 - 16 1130 500.3381
200/229 500.3332 500.3382
130/203 500.3333 500.3383
1180 1300/1220 550 150/229 14 4 1220 500.3334 - 20 1210 500.3384
200/229 500.3335 500.3385
130/203 500.3336 500.3386
1350 1500/1400 600 150/229 16 4 1520 500.3337 - 24 1510 500.3387
200/229 500.3338 500.3388
130/203 500.3339 500.3389
1650 1800/1700 700 150/229 20 4 2100 500.3340 - 28 1870 500.3390
200/229 500.3341 500.3391
130/203 500.3342 500.3392
1800 2000/1880 800 150/229 22 4 2330 500.3343 - 32 2030 500.3393
200/229 500.3344 500.3394
130/203 500.3345 500.3395
2000 2200/2080 800 150/229 24 4 2650 500.3346 - 32 2310 500.3396
200/229 500.3347 500.3397
130/203 500.3348 500.3398
2300 2500/2380 800 150/229 28 4 2990 500.3349 - 36 2890 500.3399
200/229 500.3350 500.3400
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 0204/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
BSZS BSZS-OP
Double start Augers low cohesive, medium to coarse graded compacted gravel and soil, brittle medium
hard rock
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø D (mm)
Casing-Ø (mm) Kellybox-SW/ Teeth Weight Article- Teeth Weight Article-
P (mm) Center pipe-Ø FM RM (kg) No. FM RM (kg) No.
130/203 500.3401 500.3451
500 600/520 250 150/229
- 10 580 500.3402
- 6 530 500.3452
130/203 500.3403 500.3453
520 620/540 250 150/229 - 12 640 500.3404 - 8 580 500.3454
200/229 500.3405 500.3455
130/203 500.3406 500.3456
600 700/620 300 150/229 - 12 670 500.3407 - 10 600 500.3457
200/229 500.3408 500.3458
130/203 500.3409 500.3459
650 750/670 325 150/229 - 12 710 500.3410 - 10 640 500.3460
200/229 500.3411 500.3461
130/203 500.3412 500.3462
700 800/720 325 150/229 - 12 770 500.3413 - 10 700 500.3463
200/229 500.3414 500.3464
130/203 500.3415 500.3465
780 880/800 375 150/229 - 14 950 500.3416 - 12 890 500.3466
200/229 500.3417 500.3467
130/203 500.3418 500.3468
800 900/820 375 150/229 - 14 970 500.3419 - 12 900 500.3469
200/229 500.3420 500.3470
130/203 500.3421 500.3471
900 1000/920 450 150/229 - 16 1060 500.3422 - 14 970 500.3472
200/229 500.3423 500.3473
130/203 500.3424 500.3474
970 1080/1000 450 150/229 - 16 1170 500.3425 - 14 1100 500.3475
200/229 500.3426 500.3476
130/203 500.3427 500.3477
1060 1180/1100 500 150/229 - 19 1360 500.3428 - 16 1290 500.3478
200/229 500.3429 500.3479
130/203 500.3430 500.3480
1080 1200/1120 500 150/229 - 22 1440 500.3431 - 16 1370 500.3481
200/229 500.3432 500.3482
130/203 500.3433 500.3483
1180 1300/1220 550 150/229 - 24 1560 500.3434 - 20 1490 500.3484
200/229 500.3435 500.3485
130/203 500.3436 500.3486
1350 1500/1400 600 150/229 - 26 1770 500.3437 - 24 1700 500.3487
200/229 500.3438 500.3488
130/203 500.3439 500.3489
1650 1800/1700 700 150/229 - 30 2050 500.3440 - 28 1980 500.3490
200/229 500.3441 500.3491
130/203 500.3442 500.3492
1800 2000/1880 800 150/229 - 34 2290 500.3443 - 32 2220 500.3493
200/229 500.3444 500.3494
130/203 500.3445 500.3495
2000 2200/2080 800 150/229 - 34 2590 500.3446 - 32 2520 500.3496
200/229 500.3447 500.3497
130/203 500.3448 500.3498
2300 2500/2380 800 150/229 - 38 3080 500.3449 - 36 3010 500.3499
200/229 500.3450 500.3500
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
BSPS
Tapered rock Augers hight compacted stony soil and gravel, laminated
and stif to brittle medium hard rock
Dimensions
Standard-useable length NL 1500 mm
Cutting-Ø D (mm)
Casing-Ø (mm) Kellybox-SW/ Teeth Weight Article-
P (mm) Center Pipe-Ø FM RM (kg) No.
130/203 500.3501
500 600/520 250 150/229
- 4 520 500.3502
130/203 500.3503
520 620/540 250 150/229 - 5 550 500.3504
200/229 500.3505
130/203 500.3506
600 700/620 300 150/229 - 5 630 500.3507
200/229 500.3508
130/203 500.3509
650 750/670 325 150/229 - 6 680 500.3510
200/229 500.3511
130/203 500.3512
700 800/720 325 150/229 - 6 740 500.3513
200/229 500.3514
130/203 500.3515
780 880/800 375 150/229 - 8 770 500.3516
200/229 500.3517
130/203 500.3518
800 900/820 375 150/229 - 8 790 500.3519
200/229 500.3520
130/203 500.3521
900 1000/920 450 150/229 - 10 830 500.3522
200/229 500.3523
130/203 500.3524
970 1080/1000 450 150/229 - 11 890 500.3525
200/229 500.3526
130/203 500.3527
1060 1180/1100 500 150/229 - 13 920 500.3528
200/229 500.3529
130/203 500.3530
1080 1200/1120 500 150/229 - 14 940 500.3531
200/229 500.3532
130/203 500.3533
1180 1300/1220 550 150/229 - 15 1010 500.3534
200/229 500.3535
130/203 500.3536
1350 1500/1400 600 150/229 - 17 1160 500.3537
200/229 500.3538
130/203 500.3539
1650 1800/1700 700 150/229 - 20 1270 500.3540
200/229 500.3541
130/203 500.3542
1800 2000/1880 800 150/229 - 22 1390 500.3543
200/229 500.3544
130/203 500.3545
2000 2200/2080 800 150/229 - 24 1550 500.3546
200/229 500.3547
130/203 500.3548
2300 2500/2380 800 150/229 - 26 1780 500.3549
200/229 500.3550
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 0204/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
Mr. Musterman
Person of response Muster Co-LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, England
Address (0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
Øk
___780__ __2000__ __2500__ 177,8x25
X P
(mm)
E
(mm)
F
(mm)
Øk
(mm)
P
BL
NL
Torque Number of
Shape
[kNm] blades
Cylindric X One
ØD
____250___ Conic Two X
SW
Soil type Pilot
No pilot
Normal X Fish-tail-pilot
Heavy Round shank cutter-pilot X
Additional client-specific implementation:
P
BL
Ødxt
NL
ØD
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Augers
Person of response
Company
Department
Address
Øk
________ ________ ________ ________
P E F Øk
(mm) (mm) (mm) (mm)
P
BL
NL
Torque Number of
Shape
[kNm] blades
Cylindric One
___________
ØD Conic Two
SW
Soil type Pilot
No pilot
Normal Fish-tail-pilot
Heavy Round shank cutter-pilot
Additional client-specific implementation:
P
BL
Ødxt
NL
ØD
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 0204/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BE Drilling bucket
Addition:
- RM (round shank bits)
- FM (flat teeth)
- OP (without pilot)
- K (calibration collar)
- R (reamer)
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
Technical data
• Drilling bucket
SW
L
NL
locking of trap bottom as
,,Hook-System“ available!
ØD
ØD
Ø
D
ØD
Ø
D
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BEE-R
Single start drilling high compacted stony soil and gravel,
buckets with reamer laminated and stif to brittle medium hard
rock
130 500.0016
800 900/820 150 870 500.0017
200 500.0018
130 500.0019
900 1000/920 150 980 500.0020
200 500.0021
130 500.0022
970 1080/1000 150 1060 500.0023
200 500.0024
130 500.0025
1060 1180/1100 150 1240 500.0026
200 500.0027
130 500.0028
1080 1200/1120 150 1280 500.0029
200 500.0030
130 500.0031
1180 1300/1220 150 1490 500.0032
200 500.0033
130 500.0034
1350 1500/1400 150 1850 500.0035
200 500.0036
130 500.0037
1650 1800/1700 150 2580 500.0038
200 500.0039
130 500.0040
1800 2000/1880 150 2710 500.0041
200 500.0042
130 500.0043
2000 2200/2080 150 2850 500.0044
200 500.0045
130 500.0046
2300 2500/2380 150 3340 500.0047
200 500.0048
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BEEN-FM BEEN-RM
Single start low cohensive, mixed grained,
for common soft to firm soil conditions,
drilling buckets cohensive sand, damp clay, loan marl
compacted sand and gravel, soft
decomposed, laminated soft rock
Dimensions
Standard-useable length NL = 1200 mm
Cutting-Ø D (mm)
Teeth Weight Article- Teeth Weight Article-
Casing-Ø (mm) Kellybox-SW
FM RM (kg) no. FM RM (kg) no.
130 500.1127 500.1129
500 600/520 150
2 1 580 500.1128
- 3 570 500.1130
130 500.0145 500.0193
520 620/540 150 2 1 600 500.0146 - 3 590 500.0194
200 500.0147 500.0195
130 500.0148 500.0196
600 700/620 150 3 - 630 500.0149 - 4 630 500.0197
200 500.0150 500.0198
130 500.0151 500.0199
650 750/670 150 3 - 690 500.0152 - 4 630 500.0200
200 500.0153 500.0201
130 500.0154 500.0202
700 800/720 150 4 - 740 500.0155 - 5 740 500.0203
200 500.0156 500.0204
130 500.0157 500.0205
780 880/800 150 4 - 840 500.0158 - 5 840 500.0206
200 500.0159 500.0207
130 500.0160 500.0208
800 900/820 150 5 - 860 500.0161 - 6 860 500.0209
200 500.0162 500.0210
130 500.0163 500.0211
900 1000/920 150 5 - 970 500.0164 - 6 960 500.0212
200 500.0165 500.0213
130 500.0166 500.0214
970 1080/1000 150 6 - 1040 500.0167 - 7 1030 500.0215
200 500.0168 500.0216
130 500.0169 500.0217
1060 1180/1100 150 6 - 1220 500.0170 - 7 1210 500.0218
200 500.0171 500.0219
130 500.0172 500.0220
1080 1200/1120 150 7 - 1260 500.0173 - 8 1250 500.0221
200 500.0174 500.0222
130 500.0175 500.0223
1180 1300/1220 150 7 - 1470 500.0176 - 8 1460 500.0224
200 500.0177 500.0225
130 500.0178 500.0226
1350 1500/1400 150 8 - 1820 500.0179 - 9 1800 500.0227
200 500.0180 500.0228
130 500.0181 500.0229
1650 1800/1700 150 11 - 2530 500.0182 - 12 2510 500.0230
200 500.0183 500.0231
130 500.0184 500.0232
1800 2000/1880 150 12 - 2760 500.0185 - 13 2730 500.0233
200 500.0186 500.0234
130 500.0187 500.0235
2000 2200/2080 150 13 - 2780 500.0188 - 14 2760 500.0236
200 500.0189 500.0237
130 500.0190 500.0238
2300 2500/2380 150 15 - 3260 500.0191 - 16 3230 500.0239
200 500.0192 500.0240
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BEES BEES-K
Single start
low cohesive, mixed grained, compacted sand and gravel, soft decomposed,
drilling buckets laminated soft rock
Dimensions
Standard-useable length NL = 1200 mm
Cutting-Ø D (mm)
Teeth Weight Article- Teeth Weight Article-
Casing-Ø (mm) Kellybox-SW
FM RM (kg) no. FM RM (kg) no.
130 500.1123 500.1125
500 600/520 150
- 4 600 500.1124
- 10 620 500.1126
130 500.0049 500.0097
520 620/540 150 - 4 620 500.0050 - 10 650 500.0098
200 500.0051 500.0099
130 500.0052 500.0100
600 700/620 150 - 5 680 500.0053 - 11 720 500.0101
200 500.0054 500.0102
130 500.0055 500.0103
650 750/670 150 - 5 740 500.0056 - 11 790 500.0104
200 500.0057 500.0105
130 500.0058 500.0106
700 800/720 150 - 6 790 500.0059 - 12 850 500.0107
200 500.0060 500.0108
130 500.0061 500.0109
780 880/800 150 - 6 900 500.0062 - 12 970 500.0110
200 500.0063 500.0111
130 500.0064 500.0112
800 900/820 150 - 6 920 500.0065 - 12 990 500.0113
200 500.0066 500.0114
130 500.0067 500.0115
900 1000/920 150 - 7 1040 500.0068 - 13 1120 500.0116
200 500.0069 500.0117
130 500.0070 500.0118
970 1080/1000 150 - 7 1110 500.0071 - 13 1210 500.0119
200 500.0072 500.0120
130 500.0073 500.0121
1060 1180/1100 150 - 8 1300 500.0074 - 14 1410 500.0122
200 500.0075 500.0123
130 500.0076 500.0124
1080 1200/1120 150 - 8 1340 500.0077 - 14 1450 500.0125
200 500.0078 500.0126
130 500.0079 500.0127
1180 1300/1220 150 - 9 1550 500.0080 - 15 1690 500.0128
200 500.0081 500.0129
130 500.0082 500.0130
1350 1500/1400 150 - 10 1910 500.0083 - 16 2080 500.0131
200 500.0084 500.0132
130 500.0085 500.0133
1650 1800/1700 150 - 13 2640 500.0086 - 19 2870 500.0134
200 500.0087 500.0135
130 500.0088 500.0136
1800 2000/1880 150 - 14 2870 500.0089 - 20 3160 500.0137
200 500.0090 500.0138
130 500.0091 500.0139
2000 2200/2080 150 - 15 2920 500.0092 - 21 3230 500.0140
200 500.0093 500.0141
130 500.0094 500.0142
2300 2500/2380 150 - 17 3410 500.0095 - 23 3780 500.0143
200 500.0096 500.0144
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BEZN-FM BEZN-RM
Double start low cohensive, mixed grained,
for common soft to firm soil conditions,
drilling buckets cohensive sand, damp clay, loan marl
compacted sand and gravel, soft
decomposed, laminated soft rock
Dimensions
Standard-useable length NL = 1200 mm
Cutting-Ø D (mm)
Teeth Weight Article- Teeth Weight Article-
Casing-Ø (mm) Kellybox-SW
FM RM (kg) no. FM RM (kg) no.
130 500.1131 500.1133
500 600/520 150
4 2 550 500.1132
- 6 540 500.1134
130 500.0241 500.0289
520 620/540 150 4 2 570 500.0242 - 6 560 500.0290
200 500.0243 500.0291
130 500.0244 500.0292
600 700/620 150 6 2 610 500.0245 - 8 600 500.0293
200 500.0246 500.0294
130 500.0247 500.0295
650 750/670 150 6 2 660 500.0248 - 8 660 500.0296
200 500.0249 500.0297
130 500.0250 500.0298
700 800/720 150 8 2 720 500.0251 - 10 710 500.0299
200 500.0252 500.0300
130 500.0253 500.0301
780 880/800 150 8 2 810 500.0254 - 10 780 500.0302
200 500.0255 500.0303
130 500.0256 500.0304
800 900/820 150 10 2 840 500.0257 - 12 820 500.0305
200 500.0258 500.0306
130 500.0259 500.0307
900 1000/920 150 10 2 940 500.0260 - 12 920 500.0308
200 500.0261 500.0309
130 500.0262 500.0310
970 1080/1000 150 12 2 1010 500.0263 - 12 980 500.0311
200 500.0264 500.0312
130 500.0265 500.0313
1060 1180/1100 150 12 2 1170 500.0266 - 12 1150 500.0314
200 500.0267 500.0315
130 500.0268 500.0316
1080 1200/1120 150 14 2 1220 500.0269 - 18 1200 500.0317
200 500.0270 500.0318
130 500.0271 500.0319
1180 1300/1220 150 14 2 1410 500.0272 - 18 1390 500.0320
200 500.0273 500.0321
130 500.0274 500.0322
1350 1500/1400 150 16 4 1740 500.0275 - 20 1720 500.0323
200 500.0276 500.0324
130 500.0277 500.0325
1650 1800/1700 150 22 4 2420 500.0278 - 26 2390 500.0326
200 500.0279 500.0327
130 500.0280 500.0328
1800 2000/1880 150 24 4 2640 500.0281 - 28 2610 500.0329
200 500.0282 500.0330
130 500.0283 500.0331
2000 2200/2080 150 26 4 2670 500.0284 - 30 2630 500.0332
200 500.0285 500.0333
130 500.0286 500.0334
2300 2500/2380 150 30 4 3120 500.0287 - 34 3080 500.0335
200 500.0288 500.0336
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
BEZS
Double start low cohesive, mixed grained, compacted
drilling buckets sand and gravel, soft decomposed,
laminated soft rock
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
. Mr. Mustermann
Person of response Muster Co- LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, England
Address (0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
SW
_____780_____ _____1200____
E
BL E
F
(mm) (mm)
Øk
Ø
D
____1700_____ _____90_____
BL
NL
F Øk
(mm) (mm)
_____100_____ ______62_____
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Drilling buckets
Person of response
Company
Department
Address
_____________ _____________
E
BL E
F
(mm) (mm)
Øk
Ø
D
_____________ _____________
BL
NL
F Øk
(mm) (mm)
_____________ _____________
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
KE Core Barrel
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
Technical data
SW
KEAS (with welded-on bars) carbide alloyed steel
lozenge amoured
1/3 NL
KEAZ (with welded-on teeth)
NL
ØD
Type KEAS also available
with changeable teeth!
SW
ØD
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
KEAS KEAZ
Core barrels decomposed and up to medium hard rock, decomposed rock very dense
concrete without reinforcement steel, and dry ground conditions.
left and right rotating right rotating
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø D (mm)
Drilling pipe Number of bits Weight Article- Number of Weight Article-
Kellybox-SW
Ø (mm) type BA 90 (kg) no. cutting-bits (kg) no.
130 500.0385 500.0435
500 600/520 150
14 490 500.0386
6 470 500.0436
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
KEHM KERM
Core barrels up to medium hard rock, concrete soft to medium hard rock, decomposed rock
with reinforcement steel and concrete without reinforcement steel
right rotating right rotating
Dimensions
Standard-useable length NL = 1500 mm
Cutting-Ø
Drilling pipe Number of Weight Article- Number of Weight Article-
Kellybox-SW
Ø (mm) carbid pins (kg) no. RM-bits (kg) no.
130 500.0485 500.0535
500 600/520 150
22 460 500.0486
6 515 500.0536
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
KEHD
for high torque piling rigs up to medium
Core barrels hard rock and concrete without
reinforcement steel
right rotating
130 500.0587
520 620/540 150 6 560 500.0588
200 500.0589
130 500.0590
600 700/620 150 6 650 500.0591
200 500.0592
130 500.0593
650 750/670 150 6 710 500.0594
200 500.0595
130 500.0596
700 800/720 150 6 770 500.0597
200 500.0598
130 500.0599
780 880/800 150 9 860 500.0600
200 500.0601
130 500.0602
800 900/820 150 9 890 500.0603
200 500.0604
130 500.0605
900 1000/920 150 9 1120 500.0606
200 500.0607
130 500.0608
970 1080/1000 150 10 1210 500.0609
200 500.0610
130 500.0611
1060 1180/1100 150 10 1320 500.0612
200 500.0613
130 500.0614
1080 1200/1120 150 10 1350 500.0615
200 500.0616
130 500.0617
1180 1300/1220 150 15 1470 500.0618
200 500.0619
130 500.0620
1350 1500/1400 150 15 1650 500.0621
200 500.0622
130 500.0623
1650 1800/1700 150 15 2050 500.0624
200 500.0625
130 500.0626
1800 2000/1880 150 18 2460 500.0627
200 500.0628
130 500.0629
2000 2200/2080 150 18 2690 500.0630
200 500.0631
130 500.0632
2300 2500/2380 150 18 3150 500.0633
200 500.0634
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
Mr. Mustermann
Person of response Muster Co- LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, England
Address (0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
1/3 NL
X
ØD NL BL E F Øk
(mm) (mm) (mm) (mm) (mm) (mm)
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Core barrels
Person of response
Company
Department
Address
1/3 NL
Drilling pipe size:
ØD NL BL E F Øk
(mm) (mm) (mm) (mm) (mm) (mm)
Article-no.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
ØD
ØD
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
Number of
Casing joint-Ø D (mm)
lockings
500/440 2
540/480 2
600/520 2
620/540 2
700/620 2
750/670 4
800/720 4
880/800 4
900/820 4
1000/920 4
1080/1000 4
1180/1100 4
1200/1120 4
1300/1220 4
1500/1400 6
1800/1700 6
2000/1880 6
2200/2080 6
2500/2380 6
60 - 80 1500
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
Mr. Musterman
Person of response Muster Co-LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, England
Address (0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
ØD NL
(mm) (mm)
Design
X
NL
EMDE-cardan joint
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casing drive adapter
Person of response
Company
Department
Address
ØD NL
(mm) (mm)
_________________ _________________
Design
EMDE-cardan joint
ØD
KG 150 KG 250 KG 450
Additional client-specific implementations:
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
EMDE-Casings
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessoires
Technical data
NL
NL
t2
t1 t3
b b
Di Di
Da Da
Ød
2.
5.
Type RM with round shank bit
B1
b1
ØD
NL
3.
d2
ØD 6.
D1
B1
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
Single walled casings also for diameter 600 – 1300 mm available. Standard dimensions for casing
joint wall thickness (b) and casing tube wall thickness (t2) please take from table “Double walled
casings”.
Technical modification and misprint reserved.
Client specific implementation and intermediate dimensions on request.
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessoires
Cutting shoes
Type AS AZ RM
dense coarse gravel decom- soft to medium hard rock
decomposed rock very dense and
posed and up to medium hard decomposed rock and concrete
Dimensions rock concrete without reinforce-
dry ground conditions,
without reinforcement steel,
right rotating
ment steel, left and right rotating right rotating
casing-Ø (mm) Standard Useable Length NL = 500 mm
Weight No. Of Article- No. of cut- Article- No. of round Article-
Da / Di
(kg) cutting bars no. ting theeth no. shank bit no.
600/520 270 14 500.0849 14 500.0866 6 500.0883
620/540 290 16 500.0850 16 500.0867 6 500.0884
700/620 330 16 500.0851 16 500.0868 6 500.0885
750/670 360 16 500.0852 16 500.0869 6 500.0886
800/720 380 18 500.0853 18 500.0870 9 500.0887
880/800 420 18 500.0854 18 500.0871 9 500.0888
900/820 430 18 500.0855 18 500.0872 10 500.0889
1000/920 480 20 500.0856 20 500.0873 10 500.0890
1080/1000 520 20 500.0857 20 500.0874 12 500.0891
1180/1100 570 20 500.0858 20 500.0875 12 500.0892
1200/1120 580 20 500.0859 20 500.0876 12 500.0893
1300/1220 620 24 500.0860 24 500.0877 16 500.0894
1500/1400 1140 30 500.0861 30 500.0878 16 500.0895
1800/1700 1380 36 500.0862 36 500.0879 18 500.0896
2000/1880 2000 36 500.0863 36 500.0880 18 500.0897
2200/2080 2190 40 500.0864 40 500.0881 22 500.0898
2500/2380 2420 46 500.0865 46 500.0882 24 500.0899
Cutting rings
Type AS AZ RM
Dimensions Suitability as cutting shoes Suitability as cutting shoes Suitability as cutting shoes
casing-Ø (mm) Standard Useable Length NL = 400 mm
Weight No. of Article- No. of cut- Article- No. of round Article-
Da / Di
(kg) cutting bars no. ting theeth no. shank bit no.
600/520 270 14 500.0900 14 500.0917 6 500.0934
620/540 290 16 500.0901 16 500.0918 6 500.0935
700/620 330 16 500.0902 16 500.0919 6 500.0936
750/670 360 16 500.0903 16 500.0920 6 500.0937
800/720 380 18 500.0904 18 500.0921 9 500.0938
880/800 420 18 500.0905 18 500.0922 9 500.0939
900/820 430 18 500.0906 18 500.0923 10 500.0940
1000/920 480 20 500.0907 20 500.0924 10 500.0941
1080/1000 520 20 500.0908 20 500.0925 12 500.0942
1180/1100 570 20 500.0909 20 500.0926 12 500.0943
1200/1120 580 20 500.0910 20 500.0927 12 500.0944
1300/1220 620 24 500.0911 24 500.0928 16 500.0945
1500/1400 1140 30 500.0912 30 500.0929 16 500.0946
1800/1700 1380 36 500.0913 36 500.0930 18 500.0947
2000/1880 2000 36 500.0914 36 500.0931 18 500.0948
2200/2080 2190 40 500.0915 40 500.0932 22 500.0949
2500/2380 2420 46 500.0916 46 500.0933 24 500.0950
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
Casing joints
Dimensions
double walled single walled
Casing-Ø (mm)
b H Weight Article-no. Article-no.
No. of screwings
Da / Di (mm) (mm) * (kg) male female male female
600/520 40 340 8 165 500.0951 500.0968 500.0985 500.1002
620/540 40 340 8 179 500.0952 500.0969 500.0986 500.1003
700/620 40 340 8 200 500.0953 500.0970 500.0987 500.1004
750/670 40 340 10 218 500.0954 500.0971 500.0988 500.1005
800/720 40 340 10 225 500.0955 500.0972 500.0989 500.1006
880/800 40 340 10 261 500.0956 500.0973 500.0990 500.1007
900/820 40 340 10 272 500.0957 500.0974 500.0991 500.1008
1000/920 40 340 10 300 500.0958 500.0975 500.0992 500.1009
1080/1000 40 340 10 332 500.0959 500.0976 500.0993 500.1010
1180/1100 40 340 12 355 500.0960 500.0977 500.0994 500.1011
1200/1120 40 340 12 375 500.0961 500.0978 500.0995 500.1012
1300/1220 40 340 12 393 500.0962 500.0979 500.0996 500.1013
1500/1400 50 490 16 827 500.0963 500.0980 500.0997 500.1014
1800/1700 50 490 20 998 500.0964 500.0981 500.0998 500.1015
2000/1880 60 560 20 1520 500.0965 500.0982 500.0999 500.1016
2200/2080 60 560 20 1670 500.0966 500.0983 500.1000 500.1017
2500/2380 60 560 20 1800 500.0967 500.0984 500.1001 500.1018
Screwing
Casing-Ø
Threaded locking bolt Conical ring Threaded ring
(mm)
Nos.
M B d SW D B1 D B1
Da / Di Art.-no. Art.-no. Art.-no.
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
600/520 8 75 38 60 27 500.1019 117 20 500.1036 117 18 500.1053
620/540 8 75 38 60 27 500.1020 117 20 500.1037 117 18 500.1054
700/620 8 75 38 60 27 500.1021 117 20 500.1038 117 18 500.1055
750/670 10 75 38 60 27 500.1022 117 20 500.1039 117 18 500.1056
800/720 10 75 38 60 27 500.1023 117 20 500.1040 117 18 500.1057
880/800 10 75 38 60 27 500.1024 117 20 500.1041 117 18 500.1058
900/820 10 75 38 60 27 500.1025 117 20 500.1042 117 18 500.1059
1000/920 10 75 38 60 27 500.1026 117 20 500.1043 117 18 500.1060
1080/1000 10 75 38 60 27 500.1027 117 20 500.1044 117 18 500.1061
1180/1100 12 75 38 60 27 500.1028 117 20 500.1045 117 18 500.1062
1200/1120 12 75 38 60 27 500.1029 117 20 500.1046 117 18 500.1063
1300/1220 12 75 38 60 27 500.1030 117 20 500.1047 117 18 500.1064
1500/1400 16 75 48 60 27 500.1031 117 25 500.1048 117 23 500.1065
1800/1700 20 75 48 60 27 500.1032 117 25 500.1049 117 23 500.1066
2000/1880 20 125 58 107 41 500.1033 176 30 500.1050 176 28 500.1067
2200/2080 20 125 58 107 41 500.1034 176 30 500.1051 176 28 500.1068
2500/2380 20 125 58 107 41 500.1035 176 30 500.1052 176 28 500.1069
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessoires
No.
Art.-no. Art.-no. Art.-no.
(mm) (mm)
Da / Di
600/520 3 40 5.001.070 510x10 5.001.087 5.001.104
620/540 4 40 5.001.071 535x10 5.001.088 5.001.105
700/620 4 40 5.001.072 610x10 5.001.089 5.001.106
750/670 4 40 5.001.073 625x10 5.001.090 5.001.107
800/720 4 40 5.001.074 700x10 5.001.091 5.001.108
880/800 4 40 5.001.075 790x10 5.001.092 5.001.109
900/820 4 40 5.001.076 805x10 5.001.093 5.001.110
1000/920 4 40 5.001.077 910x10 5.001.094 5.001.111
1080/1000 4 40 5.001.078 980x10 5.001.095 5.001.112
1180/1100 4 40 5.001.079 1090x10 5.001.096 5.001.113
1200/1120 4 40 5.001.080 1100x10 5.001.097 5.001.114
1300/1220 4 40 5.001.081 1210x10 5.001.098 5.001.115
1500/1400 4 60 5.001.082 1390x10 5.001.099 5.001.116
1800/1700 4 60 5.001.083 1690x10 5.001.100 5.001.117
2000/1880 6 90 5.001.084 1860x10 5.001.101 5.001.118
2200/2080 6 90 5.001.085 2060x10 5.001.102 5.001.119
2500/2380 8 90 5.001.086 2360x10 5.001.103 5.001.120
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
Mr. Mustermann
Person of response Muster Co- LTD
Company Engineering-dept.
Department Muster Rd. 1, 12345 Mustervillage, Germany
Address (0102) 12 34-56 (0102) 12 34-78 info@emde.de
Phone Fax E-mail
NL
t2
t1 t3
b b
Di Di
Da Da
36 8 12 1000 ! - 1000 !
Compatible to system: Compatible to system:
2000 ! 2 2000 !
System „Waltrop“
3000 ! 1 3000 !
4000 ! 1 4000 !
5000 ! - 5000 !
6000 ! 3 6000 !
Additional client-specific implementations:
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessoires
Person of response
Company
Department
Address
NL
t2
t1 t3
b b
Di Di
Da Da
1000 ! 1000 !
Compatible to system: Compatible to system:
2000 ! 2000 !
3000 ! 3000 !
4000 ! 4000 !
5000 ! 5000 !
6000 ! 6000 !
Additional client-specific implementations:
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessories
Di
Da
NL
Cutting ring Threaded locking bolt X Threaded ring X Conical ring
X
M ØD
B1
NL
B1
B
ØD
Ød
SW
Casing joint
male female double walled male female single walled
b h nos. of t1 t2 b h nos. of t3
(mm) (mm) screwings (mm) (mm) (mm) (mm) screwings (mm)
Screwing
Nos. of Threaded locking bolt Conical ring Threaded ring
screwings M b d SW D B1 D B1
System „Waltrop“
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Casings / accessoires
Di
Da
NL
Cutting ring Threaded locking bolt Threaded ring Conical ring
M ØD
B1
NL
B1
B
ØD
Ød
SW
Casing joint
male female double walled male female single walled
b h nos. of t1 t2 b h nos. of t3
(mm) (mm) screwings (mm) (mm) (mm) (mm) screwings (mm)
Screwing
Nos. of Threaded locking bolt Conical ring Threaded ring
screwings M b d SW D B1 D B1
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Concrete tremie / accessories
Remarks
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Concrete tremie / accessories
Technical data
1.Charging funnel
6.O-ring
2.Tremie
7.Steel cable
3.Starter tube
4.Lifting cap
5.Collar
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Concrete tremie / accessories
Pipe-Ø (d) x Wall thickness 165 x 6,3 219 x 6,3 244,5 x 6,3 267 x 6,3
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Concrete tremie / accessories
Mr. Musterman
Person of response Muster Co-LTD
Company Engineering-dept.
Department
Muster Rd. 1, 12345 Mustervillage, England
Address
(0102) 12 34-56 (0102) 12 34-78 Info@muster.com
Phone Fax E-mail
Charging funnel
ØD L1
Art.-No.
(mm) (mm)
Tremie
Pipe-Ø x Wall NL
Art.-No.
(mm) (mm)
Starter tube
Pipe-Ø x Wall L2
Art.-No.
(mm) (mm)
Lifting cap
Standard Yes X No
Collar
A L3
(mm) (mm)
_________270________ ________1400________
Article-No. ____________________
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Concrete tremie / accessories
Person of response
Company
Department
Address
Denomination Type:
Charging funnel
ØD L1
Art.-No.
(mm) (mm)
Tremie
Pipe-Ø x Wall NL
Art.-No.
(mm) (mm)
Starter tube
Pipe-Ø x Wall L2
Art.-No.
(mm) (mm)
Lifting cap
Standard Yes No
If not standard, give short description of achievement
Collar
A L3
(mm) (mm)
____________________ ____________________
Article-No. ____________________
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
2 Holder B 11 500.1138
4 Holder DV 9 500.1140
6 Holder DV 25 500.1142
8 Holder B 43 H 500.1144
20 Holder B 65 / 22 500.1162
22 Holder B 48 500.1164
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
Ø8
1 2
19.5
15.5
28
Ø11.5
53
Ø17.5
18
23
Ø11.3
42
3 Ø12 4 Ø19.8
25.2
45
45
85.7
21.5
Ø27
39
58
Ø19.4
Ø12 Ø25.4
5 6
61
64
82
121
Ø33
44
Ø25 85
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
Ø19 Ø38.2
7 8
38
65
65
Ø30.2
125
Ø50 37
Ø66
Ø30
100
Ø 50
Ø50
9 10
100
R 1" 65
R 1"/M36
60
Ø50
11 12
65
105
M 36
M36/R 1"
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
13 14
15 16
17 18
Ø120
Ø120
130
130
Ø200
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
19 20
155
155
75
42
22.5 26
65 84
21 22
Ø38.2
73
63
Ø30.2
50
75
60
63
Ø38
Ø95
Ø30
16
23 24
47
65
Ø120
110
130
130
51
44 40
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de
Round shank bits, flat teeth, pilot bits
25 26
46.5 75
84.5
Ø11
27 28
31
Ø120
65
130
25
EMDE INDUSTRIE-TECHNIK
Tel.: 02604/9703-0; Fax: 02604/9703-33; e-Mail: info@emde.de; Internet: http://www.emde.de