This document provides specifications for a belt type bucket elevator with the following key details:
- Capacity of 20 tons per hour
- Discharge height of 35 meters
- Belt speed of 1 meter per second
- Feed size of 40mm with 95% between 1-6mm
- Bulk density of 1.1 tons per cubic meter
This document provides specifications for a belt type bucket elevator with the following key details:
- Capacity of 20 tons per hour
- Discharge height of 35 meters
- Belt speed of 1 meter per second
- Feed size of 40mm with 95% between 1-6mm
- Bulk density of 1.1 tons per cubic meter
This document provides specifications for a belt type bucket elevator with the following key details:
- Capacity of 20 tons per hour
- Discharge height of 35 meters
- Belt speed of 1 meter per second
- Feed size of 40mm with 95% between 1-6mm
- Bulk density of 1.1 tons per cubic meter
BULK DENSITY:- 1.1 T/m3 TYPE- Belt type bucket elevator CAPACITY- 20 TPH DISCHARFGE HEIGHT:-35 MTRS BELT SPEED :-1 MPS
SL.NO. TECHNICAL DETAILS
1 Conveying Capacity (Tph) 2 Type 3 Material To Be Transported 4 Bulk Density Of Material For Volume Cal. (T/M-3) 5 Bulk Density Of Material For Power Cal. (T/M-3) 6 Temperature Of Material (Degree C) 7 Belt Speed (M/S) Adopted 8 Conveying Height (M) 9 Bucket Width (Mm) 10 Bucket Spacing (Mm) (Adopted) 11 Filling Factor Actual 12 No. Of Buckets (Adopted) 13 Bucket Size 14 Bucket Volume (Ltrs) 15 Belt Width (Mm) 16 Belt Strength (Kg/Cm) 17 Belt Type 18 Belt Factor Of Safety Required 19 Pulley Rpm (Revised) 20 Motor Output Adopted,KW 21 Total Power at driven shaft (KW) 22 Motor Rpm 23 Motor Selected (Bbl/Siemens) 24 Fluid Coupling Selected 25 Size Of Gear Box Selected 26 Reduction ratio 27 Aux. Drive Geared Motor Selected 28 Head Pulley Shaft Dia At Bearing Center(mm) 29 Head Pulley Shaft Bearing Selected 30 Tail Pulley Shaft Dia Adopted At Bg. Center (Mm) 31 Tail Pulley Shaft Bearing Selected 32 Jaw Clutch Coupling Selected 33 Static Load Per Bolt (Kg) 34 Head Pulley Size (Mm ) 35 Tail Pulley Size (Mm ) 36 Crowing of pulley & fastners 37 Auto tension Device 38 Pulley Rpm (Revised) 39 Drive Base frame 40 Bucket body & Intermediate Casing 41 Belt Sway Switch 42 Level Control Switch 43 ZSS Switch 20 TPH BELT TYPE BUCKET ELEVATOR LIME STONE 1.1 1.3 35 1 35 350 400 0.8 180 350X175X180 4.1 400 215 NYLON 1.2 47 22 18 1440 Bbl _ H2 180 1:32 _ 110 22224K 100 22222K _ _ 420 420 _ NO 45 YES M.S YES YES YES