Professional Documents
Culture Documents
Ergopower: Geschäftsbereich Arbeitsmaschinen-Antriebe Und Achssysteme
Ergopower: Geschäftsbereich Arbeitsmaschinen-Antriebe Und Achssysteme
ERGOPOWER Arbeitsmaschinen-Antriebe
und Achssysteme
The Control units can be programmed customized and vehicle-specific in a large spectrum,
Control parameter can be logically chained, and also Special functions such as gear limitation,
Converter or Retarder functions can be integrated.
Because of the great number of available TCU, the precise Technical Data must be
taken from the corresponding Installation drawing.
Figure-No..: 1.6 B1
Installation position of the TCU
100
ZF-Type plate
50
209
100
Figure-No.: 1.6 B2
19