The document discusses friction in modal analysis of piping systems. It provides an example of how accounting for friction at non-linear restraints through a stiffness factor can impact modal analysis results. It also discusses concepts like support nodality and how to model dynamically fixed supports, including minimum required stiffnesses and friction loads.
The document discusses friction in modal analysis of piping systems. It provides an example of how accounting for friction at non-linear restraints through a stiffness factor can impact modal analysis results. It also discusses concepts like support nodality and how to model dynamically fixed supports, including minimum required stiffnesses and friction loads.
The document discusses friction in modal analysis of piping systems. It provides an example of how accounting for friction at non-linear restraints through a stiffness factor can impact modal analysis results. It also discusses concepts like support nodality and how to model dynamically fixed supports, including minimum required stiffnesses and friction loads.
Friction in Modal Analysis The Problem The role of friction load at non-linear restraints in modal analysis
Saipem Classification - General Use
Friction in Modal Analysis Theory The role of friction load at non-linear restraints in modal analysis
Saipem Classification - General Use
Friction in Modal Analysis Example Typical piping stress calculation with frictional restraints
Saipem Classification - General Use
Friction in Modal Analysis Example Modal analysis results with no Stiffness Factor for Friction (0.0-Not Used)
Saipem Classification - General Use
Friction in Modal Analysis Example Modal analysis results with Stiffness Factor for Friction (394 cm-1)
Saipem Classification - General Use
Friction in Modal Analysis Then, when to be used?
Saipem Classification - General Use
Friction in Modal Analysis Then, when to be used? The concept of Support Nodality (from Wood/Betamachinery)
Saipem Classification - General Use
Friction in Modal Analysis Then, when to be used? The concept of Support Nodality (from Wood/Betamachinery)
Saipem Classification - General Use
Friction in Modal Analysis Then, when to be used? How to consider a support dynamically fixed? Minimum stiffnesses and breakaway friction minimum load (from Wood/Betamachinery)