The document describes calculations involving a lever, pulley, and gear system. A 0.85g mass is placed 0.140m from the lever's fulcrum. This results in a torque of 0.119gm applied to an 80 tooth gear, producing a torque of 9.52gm. The pulley has a radius of 0.83cm, resulting in a final calculation value of 11.4690.
The document describes calculations involving a lever, pulley, and gear system. A 0.85g mass is placed 0.140m from the lever's fulcrum. This results in a torque of 0.119gm applied to an 80 tooth gear, producing a torque of 9.52gm. The pulley has a radius of 0.83cm, resulting in a final calculation value of 11.4690.
The document describes calculations involving a lever, pulley, and gear system. A 0.85g mass is placed 0.140m from the lever's fulcrum. This results in a torque of 0.119gm applied to an 80 tooth gear, producing a torque of 9.52gm. The pulley has a radius of 0.83cm, resulting in a final calculation value of 11.4690.