Professional Documents
Culture Documents
PATTERN:
See diagrams A.1 to A.6. Diagrams show all rows in pattern seen from the right side.
----------------------------------------------------------
BLANKET:
Worked back and forth. Cast on 108-170 stitches on circular needle size 3 mm / US 2.5 with
BabyMerino. Work 3 ridges in GARTER STITCH - see explanation above. Then work as follows
from right side:
Work 3 stitches in garter stitch, 3-4 stitches in stockinette stitch, * A.1 (= 14 stitches), A.2 (= 8
stitches) over 16 stitches (= 2 times in width) *, work from *-* 1-2 times in total, A.1 over 14
stitches, A.2 over 8 stitches, A.1 over 14 stitches, * A.2 over 16 stitches (= 2 times in width),
A.1 over 14 stitches *, work from *-* 1-2 times in total and finish with 3-4 stitches in
stockinette stitch and 3 stitches in garter stitch.
When A.1 and A.2 have been worked 1 time vertically, there are 126-200 stitches on needle.
Continue in garter stitch and stockinette stitch and work A.3 over every A.1 and A.4 over
every A.2. Continue pattern like this. REMEMBER THE GAUGE! When piece measures 48-78
cm, adjust to finish on 1st-6th row in A.4. Now work A.5 over every A.3 and A.6 over every
A.4. When A.5 and A.6 have been worked 1 time vertically, there are 108-170 stitches on
needle. Work 3 ridges. Bind off.
Diagram explanations
= knit from the right side, purl from the wrong side
= purl from the right side, knit from the wrong side
= between 2 stitches make 1 yarn over, on next row work yarn over twisted to avoid
holes
= slip 1 stitch on cable needle behind piece, knit 1, knit from cable needle
= slip 1 stitch on cable needle behind piece, knit 2, purl from cable needle
= slip 2 stitches on cable needle in front of piece, purl 1, knit 2 from cable needle
= slip 2 stitches on cable needle behind piece, knit 2, knit 2 from cable needle
= slip 2 stitches on cable needle in front of piece, knit 2, knit 2 from cable needle
= knit 2 together
Diagram for DROPS Baby 31-16
Diagram for DROPS Baby 31-16
Have you made this or any other of our designs? Tag your pictures in social media with
#dropsdesign so we can see them!
To get the measurement tape to be 100 % accurate, you have to print out the pattern in full scale (and not use
the print option "fit to page").
If we get a report of a potential error, we will review the pattern and make the correction if necessary. This will
be done normally within 7 to 10 working days. If no correction is made, it means that we weren't able to find
any error/mistake.
Wondering where you can buy the yarn for this pattern?
Try a DROPS Super Store!
- Wool Warehouse Direct Ltd
- Purple Sheep Yarns
© 1982-2023 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more
about what you can do with our patterns at the bottom of each pattern on our site.