Professional Documents
Culture Documents
2180
BOOM
Type 4 stages telescopic Max. floor height Max. working radius
Length 5.39 to 16.39m 4400 1940 m m
Extension stroke 10.99m
Max. load capacity
1020
Elevation angle ー15° to 79°
Elevation speed Up: 55sec / Down: 55sec kg
Extension speed Extend: 55sec / Retract: 55sec
3520
ROTATION DEVICE
Rotation angle 360° continuous ① The highest model of AICHI TZ-series
Rotation speed 0.8 rpm
OUTRIGGER ⇒Achieves the same 1000kg maximum load capacity of the other TZ
F RONT 1655
models but at a platform height of 19.7m.
3870 2460 20 RE AR 1520
Outrigger width 1.99 to 4.42m 7460
Vertical/Horizontal movement system Automatic platform MIN 1990 mm ⇒Introducing special "vertical / horizontal movement" levers for
stowage system Engine start / stop system Automatic (Occupied width: 2170 mm) Occupied width: 3385 mm straight-line vertical / horizontal / diagonal movements. Move
accelerator Pre-operation check system Control panel
anywhere with one-touch operation.
light Rotation gear covers Sweepers of boom part Spirit
level
Options ③Safer at night too! I lluminated control panels
Outrigger marker lamps Upper working light Exceeding
vehicle width prevention system
STANDARD ACCESSORIES
Wheel chocks(4 pcs.) Jack bases(4 pcs.)
*Height may vary depending on the specifications of the vehicle the *Extension width: Distance from center of left outrigger to a center of right outrigger
aerial device is mounted on. *Occupied width: Distance from edge of left outrigger pad-base to edge of right outrigger pad-base
!
machine.
1152-10 Ryoke Ageo Saitama 362-8550 Japan ●Ultimate compliance to national safety regulations is the responsibility
TEL:+81-48-781-6813 URL:http://www.aichi-corp.jp of the user and their employer.
●All owners and users of the machine must read, understand, and
DISTRIBUTOR comply with all applicable regulations.
Vertical (m)
20
2
1
Mov em ent 19
Same as outrigger
18
17 width MAX.
OUTRIGGER W IDTH
16
15
14 1000kg
Horiz ontal 13
4
500kg
MAX
10
3
9 250kg
8 100kg
7
6
5
4
3
2
1
0
*Roller-type vehicle pictured Stows by fully automatic -3 -2 -1 0 1 2 3 4 5 6 7 8 9 101112 *Working radius is same regardless of rotation angle.
Working radius (m)
control of platform and
(m)
boom functions. 20 MID2
19 Same as outrigger Same as outrigger
18
17 width MAX. 80° width MID2.
OUTRIGGER W IDTH
16
VOICE ALARM SYSTEM 15
14 1000kg
13
100°
100°
500kg
movements and
MID2
10
9 250kg
Front MAX MAX Rear
limitations are notified 8
7
100kg
6
by voice recording. 5
Sp ecial l ev ers 4
* Volume is adjustable 3
This movement increases work efficiency along continuous surfaces such as 4 levels 2
1
Same as outrigger
80°
0
Same as outrigger
tunnel walls or during horizontal work under bridges. width MID2. width MAX.
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 101112
MID2
Working radius (m)
(m)
OPTIONS
20 MID1
19 Same as outrigger
Same as outrigger
18
17 width MAX. 130° width MID1.
OUTRIGGER W IDTH
16
15
14 1000kg
13
50°
50°
MID1
10
Specifications 9 250kg
Front MAX MAX Rear
8 100kg
-70W 7
6
-halogen 5
4
3
EXCEEDING VEHICLE W IDTH -diffusion lens 2
1
PREVENTION SYSTEM 130°
Same as outrigger Same as outrigger
0
width MID1. width MAX.
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 101112
MID1
Working radius (m)
(m)
20
19 Same as outrigger MIN Same as outrigger
18
17 width MAX.
166° width MIN.
OUTRIGGER W IDTH
16
15
14 1000kg
13
14°
14°
10
MIN
9 250kg
8
Front MAX MAX Rear
100kg
This system prevents contact and collision 7
6
5
accidents with vehicles passing alongside. 4
OUTRIGGER MARK ER 3
It prevents the platform from moving beyond the 2
LAMPS 1 166° Same as outrigger
outrigger. 0
Same as outrigger
width MAX.
width MIN. MIN
Flashing lamps -3 -2 -1 0 1 2 3 4 5 6 7 8 9 101112
Working radius (m)
fitted on each jack
urge personnel in note 1 - Working range diagrams do not include boom deflection.
the area to be 2 - Working range diagrams assume that the jacks are set on
a firm surface.
alert. 3 - Working range varies based on outrigger width and boom
rotation angle.
4 - Minimum boom elevation angle varies by boom rotation
angle to avoid interference between cabin/outriggers and
boom/platform.
*Japanese model pictured
S P E C I F I C AT I O N S
●DATA & FEATURES ●VEHICLE DIMENSIONS
AERIAL DEVICE Under figure is a Japanese model. Dimensions vary depend on a chassis.
Model TZ20C1FS
Type Truck-mounted heavy loading
type aerial work platform
PLATFORM
Max. load capacity 1,000kg
Max. floor height* 19.7m
(ground to bottom of platform)
Max. working radius 10.9m at 100kg load
(centerline of rotation to platform interior)
7.68m at 1000kg load
(centerline of rotation to platform interior)
class 20
2180
BOOM
Type 4 stages telescopic Max. floor height Max. working radius
Length 5.39 to 16.39m 4400 1940 m m
Extension stroke 10.99m
Max. load capacity
1020
Elevation angle ー15° to 79°
Elevation speed Up: 55sec / Down: 55sec kg
Extension speed Extend: 55sec / Retract: 55sec
3520
ROTATION DEVICE
Rotation angle 360° continuous ① The highest model of AICHI TZ-series
Rotation speed 0.8 rpm
OUTRIGGER ⇒Achieves the same 1000kg maximum load capacity of the other TZ
F RONT 1655
models but at a platform height of 19.7m.
3870 2460 20 RE AR 1520
Outrigger width 1.99 to 4.42m 7460
Vertical/Horizontal movement system Automatic platform MIN 1990 mm ⇒Introducing special "vertical / horizontal movement" levers for
stowage system Engine start / stop system Automatic (Occupied width: 2170 mm) Occupied width: 3385 mm straight-line vertical / horizontal / diagonal movements. Move
accelerator Pre-operation check system Control panel
anywhere with one-touch operation.
light Rotation gear covers Sweepers of boom part Spirit
level
Options ③Safer at night too! I lluminated control panels
Outrigger marker lamps Upper working light Exceeding
vehicle width prevention system
STANDARD ACCESSORIES
Wheel chocks(4 pcs.) Jack bases(4 pcs.)
*Height may vary depending on the specifications of the vehicle the *Extension width: Distance from center of left outrigger to a center of right outrigger
aerial device is mounted on. *Occupied width: Distance from edge of left outrigger pad-base to edge of right outrigger pad-base
!
machine.
1152-10 Ryoke Ageo Saitama 362-8550 Japan ●Ultimate compliance to national safety regulations is the responsibility
TEL:+81-48-781-6813 URL:http://www.aichi-corp.jp of the user and their employer.
●All owners and users of the machine must read, understand, and
DISTRIBUTOR comply with all applicable regulations.