Professional Documents
Culture Documents
V1-0 / 2022
Why LEDiL? Freedom of design
Allows easy and flexible cost and efficacy optimization.
The world is full of different roads and strict street lighting
requirements. Add to this different LED package preferences and Typical usage 5050, 8-chip plastic
mechanical size limitations and possible combinations multiply 4W / 600 lm or 3535 Ceramic 3030, 2-chip plastic 3030, 1-chip plastic
~1200 lm output @ 2W / 300 lm 2W / 300 lm 1W / 150 lm 0.5W / 75 lm
exponentially. That is why LEDiL offers so many specific 8W / lens array
light distributions for road lighting to help you meet
Needs typical thermal
these requirements.
design to remain
Whether it is a tunnel in Europe or road efficient
Around
in Brazil, we offer solutions for virtually 50 beams High density usage
any LED model and type; from tiny for streets
50 x 50 mm
CSPs to large COBs, while keeping ~2400 lm output at
Extensive
the optics as future proof and 16W / lens array
Free form customer
modular as we can, so you can designs support Needs excellent
keep it simple and flexible. thermal design to
Our remain efficient STRADA-2X2 STRADELLA-8 STRADELLA-16
offering
Ceramic package LED
Make our optics High
the heart of your quality Modularity
Plastic package LED
luminaire to optimise cost,
efficacy and light robustness / efficacy (lm/W)
distribution with great
results.
Patented Global
innovations solutions IESNA Type
IESNA Type is defined by position of highest candela intensity. IESNA Type classification is
Efficiency
established by measuring where the bulk of the pattern falls on the grid.
With the same installation and light output LEDiL light
distribution is 80 % more efficient than competitior equivalent!
– 10 % intensity cut off
– Needs fewer LEDs, lenses and heat sinks
– Type 50 % intensity
– Uses less energy for a faster return on investment
1.0 MH
– Max candela peak reach
6.0
MH
Lon
g
M
ed
Type I
iu
Sh
m
o
H
rt
1.0 M
V
er
3. 7
0 MH
V
Type II
y
5M
er
sh
2.2
y
H
or
Sh
sh
H 5M
t
1.0 M
Type III
or
1M
or
H
t
t
M
– H
ed
H
1.75 M
iu
0
Type IV
M
Lo
H
H
1
2 .75 M
ng
.0
M
6.
H
0
.2
3.
5
M
75
M
LEDiL lens Average: 18 lx Competitor lens Average: 10 lx
H
H
M
H
Uniformity (uO): 0.58 Uniformity (uO): 0.34
T1 T1-A T1-M T2 T2-B T2-C/C2/C3 STRADA-IP-24
Beams for street lighting
IESNA Type I IESNA Type I (short) IESNA TypeI (medium) IESNA Type II IESNA Type II, IESNA Type II, added
(medium) beam for European (medium) minimized house side house side backlight PATENTED
P-class standard backlight
STELLA
ME ME3 ME-N ME-WIDE1 ME-WIDE2 MEW
Excellent longitudinal For ultra-long pole Designed for high Fulfilling EN13201 For staggered pole Extremely low glare Ø90 mm ingress protected G1
luminance uniformity distances with excellent poles, fulfilling M-class requirements, setups fulfilling fulfilling EN13201
fulfilling EN13201 longitudinal luminance EN13201 M-class added house side EN13201 M-class M-class requirements silicone lenses.
M-class requirements uniformity fulfilling requirements backlight requirements for wet road surfaces
EN13201 M-class req. in North Europe Compatibility:
T4 VSM DWC2
G1: – T4 and DWC2, up to 23 mm
LES size. G2
NHS LN1 LM1 LM2 LW1 ANZ-P – VSM up to 30 mm LES size.
Narrow beam, For EN13201 M-class For EN13201 M-class For EN13201 M-class For EN13201 M-class Pedestrian lighting
minimal house side requirements with high requirements where requirements where requirements where in Australia & New
light poles or where road road width ≥ the pole road width ≤ the pole road width > the pole Zealand G2: – Optimized for 23 mm LES size.
width ≤ the pole height height height height
– Compatible with up to 30 mm LES size. T2 T3 T4
– Same footprint as with original STELLA,
but with more space inside for Zhaga
compliant COB connectors.
– 3rd party connectors available from: VSM
XW DB PX PXL FN FT
Wide beam Floodlight beam for Double asymm., Double asymm., Narrow forward Forward throw beam B+W, BJB, TE and IDEAL.
the area between the pedestrian crossings, pedestrian crossings, throw beam for area for area lighting
railway tracks acc. to right side traffic left side traffic lighting
DB requirements.
JENNY
TF FR FS FS2 FS3 B2 / B2-STP 35 x 35 mm single lenses
Narrow forward throw Asymmetric spot light Forward throw beam For symmetrical tunnel Forward throw beam For area lighting and
beam optimized for
European tunnels
beam for floodlighting
railway tracks according
for area lighting lighting and parking
garages, ideal for ca-
optimized for Europe-
an tunnels, extremely
applications demand-
ing a wide oval beam
and 8X1 arrays made from
to Russian normative tenary street lighting efficient lighting with
counter-beam method
pattern silicone.
FT65 FT45 CY
especially designed for street lighting. lenses and dense lens arrays.
Compatibility: All STRADELLA versions: For up to 3535 size mid- and high-power LEDs.
T1-A T2 T3
NEW NEW
IP-28 – IP-64
– 100 x 100 mm – 253 x 74 mm
– ingress protected – ingress protected VSM
T2 T2-B T2-L T3 T3-B T3-L T4-B ME T4B SCL VSM
IP-2X6
– 173 x 71.4 mm
– ingress protected
Compatibility: VSM DWC DWC-B FW SCL PX PXL
Cost-efficient product family of single lenses and
up to 5050 size LED packages
SITARA 2X2 lens arrays with ingress protection. PATENTED
MX/S
– 90 x 90 mm
4 4 Compatibility: Optimized for high-power 5050
– ingress protected 4S T3 16 T3-M size LED packages.
4S T2 8 T2-C 16 T2-M 4 T2-S
Compatibility:
– MX: up to 7070 size LED packages
4 4 4
– MXS: also for up to 9 mm COBs 4 4S 4S 8 2X2
– 8MX: for flat 5050 size LED packages 16 T4 4S T4-B 16 VSM 8 DWC/2 16 SCL SINGLE – 50 x 50 mm
– 16MX: for CSP LEDs Number of lenses in an array: Versions in silicone: – 14 x 14 mm T1-A T2 – ingress protected T2
4 8 16 S
How to read polar curves
0°
0° to 180°: Light along the road 2 70
°
1MH 1MH
1MH 4MH
STRADA-2X2-T2-M STRADA-2X2-T4-B MH = mounting height unit
Technical support
North America
tech.support.us@ledil.com
The information contained herein is the property of Ledil Oy, Joensuunkatu 13, FI-24100 SALO, Finland, and is subject to change without
prior notice. Please visit www.ledil.com for additional information, such as the latest photometric files, 3D mechanical models, and
application notes relating to handling, gluing and taping. LEDiL products are IPR protected.