You are on page 1of 46

Vertiv Aisle Containment System

Overview

Vertiv Design – Confidential


CONTENTS

 Product Overview
 Aisle frame introduction

 Door system introduction

 Roof system introduction

 Accessory introduction

 Market configuration case

2
Product Overview

Vertiv™ Aisle Containment System is a rack-independent data center aisle product manufactured by Vertiv™. It
is deployed in indoor environments such as edge locations and medium and large data centers, blocking the
mixing of hot and cold air and increasing the efficiency of data centers. The system is fully compatible with
Vertiv™ cabinets or other 42-52U cabinets that meet the requirement of the EIA-310-D standard.

 Closed, modular, standalone solution

 Separated cold and hot areas provide more options, as e.g.:

 Cold air is blown to the space between the IT Racks and hot air is blown
out outside the aisle containment
 Cold air could be provided by perforated raised floor –thermal
components are not part of the Aisle containment solution
 Hot air is sucked out from the hot存在的不足及后期学习计划
area inside the Aisle containment via
roof duct

3
Product Overview
 Product Features

 The length of the closed aisle can be adjusted


between 3048 mm (10 ft) and 4876.8 mm (16 ft)
and the aisle length increment is 50.8 mm (2 in.).

 The aisle length can span across multiple


sections.

 Aisle width is available in three sizes: 914.4 mm


(3 ft), 1219.2 mm (4 ft), and 1828.8 mm (6 ft).

 Aisles can be configured in cabinets of different


heights, widths, and depths.

 Flexible installation supports raised floor and


concrete floor installation. 存在的不足及后期学习计划 Sliding Door

4
Product Overview

 The height of the aisle is compatible for Vertiv rack and 3rd rack from 42U to 52U.

 The roof have two different styles, lateral ceiling (fixed roof and shrink roof) and vertical duct.

 The surface color is RAL7021, fine texture surface.

 The total load capacity of the system is 2000lbs.

 All the sheet metal of the system is earthed reliably.

存在的不足及后期学习计划

5
Product Overview
 Operating Conditions
The installation site of the Vertiv™ Aisle Containment System should be such that the product is away from heat,
easy-to produce sparks, direct sunlight, corrosive gases, and organic solvents.
Operating Conditions
Item Description

Floor Level ground. Maximum deviation is 0.6 mm/m (0.072 in. per 10 ft)

Room Large data centers, mid-size data centers, and equipment & IT rooms

Ambient temperature Indoor: -20 °C to 55 °C (-4 °F to 131 °F)

Ambient humidity 5% RH to 95% RH, 40 °C (104 °F) (no condensation)

Storage Conditions
Parameters Values

Environment Clean and clear of dust and debris

Room
存在的不足及后期学习计划
Large data centers, mid-size data centers, and equipment & IT rooms

Ambient temperature -33 °C (-27.4°F) to + 70 °C (158 °F)


Shrink roof is:-33 °C (-27.4°F) to +55 °C (131 °F)
Ambient humidity 5 % RH to 95 % RH (no condensation)
6
Product Overview
 Certification

 CE declarations by internal lab.(lighting kit)

 Rohs declarations by internal lab.

 Sub-assemblies of the aisle pass UL certificate by 3rd institute.

存在的不足及后期学习计划

7
CONTENTS

 Product Overview

 Aisle frame introduction


 Door system introduction

 Roof system introduction

 Accessory introduction

 Market configuration case

8
Aisle Frame
Aisle frame is the main structure of the Aisle Containment System, which is composed of Vertical Post, Width
Connector, Extendable Beam, and Cantilever Arm. Width Connector
Cantilever Arm

Width Connector

3ft 4ft 6ft Vertical post

 Aisle width is available in three sizes: 914.4 mm (3 ft), 1219.2


mm (4 ft), and 1828.8 mm (6 ft).

 The length of the aisle frame can be adjusted between 3048 mm


(10 ft) and 4876.8 mm (16 ft) and the aisle length increment is
存在的不足及后期学习计划
50.8 mm (2 in.).
Telescope from 10ft to16ft
 Surface color RAL7021 black, fine texture surface.

9
Aisle Frame
10ft(3048mm)~16ft(4876.8mm)

Height adapter
Extendable beam Modular hole for installing
the extendable beam.

9ft
52U
(2743mm)
48U
45U “U” position silkscreen
42U

Rack
Vertical post

 The frame can deploy 42U-52U racks due to the extendable beam can adjust the install height and
the height adapter can fill the gap that have different size between the rack and extendable beam .

 Modular holes are designed on vertical post for different application.

 The height marks from 42U to 52U are marked on the vertical post.

10
Aisle Frame

Zoom in

Screw connection

 Aisle frame can be mounted directly onto a  The aisle length can span across multiple sections.
concrete floor, or onto a raised floor system,
 The frame is constructed as sheet metal and
supported by optional floor stands.
存在的不足及后期学习计划
connect with bolts.
 The weight-bearing capacity of the aisle frame is
 Two pod use a couple common vertical post.
907.2 kg (2000 lbs).

11
Aisle Frame-vertical post

“U” position silkscreen


Vertical post
Wire hole
 “U” position silkscreen is used to adjust the height of the
extendable beam to meet the requirements of rack of
different heights.

 The weight-bearing capacity on a single vertical post is


249.4 kg ( 550 lbs).

 The height of vertical post is 9ft.


存在的不足及后期学习计划
Grounding point
 Grounding points is provided on the vertical post. Vertical post fixing hole

12
Aisle Frame-extendable beam
Extendable beam

Telescoping

 Aisle length can be adjusted between 3048 mm (10 ft)  The extendable beam is made of sheet metal and
and 4876.8 mm (16 ft) and the aisle length increment fixed to frame.
is 50.8 mm (2 in.).
 The modular holes are designed on extendable beam
 The weight-bearing capacity of the unilateral for different application.
extendable beam is 226.8 kg (500 lbs) (including
 Symbols are marked on the extendable beam for
cantilever arm).
position indicator.
13
Aisle Frame-width connector
Width Connector

6ft width connector

Width beam
4ft width connector

Brush

Width panel
3ft width connector

 Two width connectors are installed at the front and back end of the aisle.

 According to different aisle widths, there are three kinds of width connectors of 3ft/4ft/6ft .

 Each width connector consists of two width beams , two width panels and four brushes.
14
CONTENTS

 Product Overview

 Aisle frame introduction

 Door system introduction


 Roof system introduction

 Accessory introduction

 Market configuration case

15
Door-swing door
Door header Door header

Hinge

Hinge

Door lock

Hinge

Right door Left door Right door


Left door frame Right door frame Left door frame Right door frame

3ft/4ft aisle swing door 6ft aisle swing door


16
Door-swing door
 Each aisle containment is equipped with 2 doors.

 3ft and 4ft aisle width door is single swing door, 6ft aisle width door is dual swing door.

 Doors come standard with allowing a maximum 100°door opening.

 Door closers are installed, fix at the opening angle no more less 90°, otherwise auto-close to
maintain aisle containment integrity.

 Mechanical lock is installed on door to limit access to the aisle.

1367.2mm 2281.6mm

2743.2mm
2743.2mm

17
Door-swing door panel
Door closer Door closer

Hinge
Swing door-right
Safety glass
Hinge

Handle
Door lock

Sheet steel

Hinge

Swing door-left
Door lock Swing door-right
3ft/4ft swing door 6ft swing door

 Door is made of 4mm thickness safety glass with sheet metal frame.

 There are handles on both sides of the door.

 The door lock can be opened and closed from the inside and outside of the aisle.
18
Door-swing door frame

3ft mounting hole


Left door frame 4ft mounting hole
Right door frame

Aisle frame

Left door frame


Right door frame

An aisle has 4 door frames, which are bolted on the vertical post of the aisle frame.

19
Door-swing door header

Door header

3ft/4ft door header

6ft door header

There are two types of door header for swing door, and the 3ft aisle and 4ft aisle share one
type of door header.
20
Door-sliding door

Close Close Close Close

Open Open Open Open

3ft right opening door 3ft left opening door 4ft semi-auto sliding door 6ft semi-auto sliding door

There are four types of sliding doors in the aisle.


21
Door-sliding door
2781mm
2781mm

2744mm
2744mm
832
832 mm
mm

3ft left opening door


3ft right opening door
2476mm 3696mm

2744mm

2744mm
1140 1670
mm mm

4ft semi-auto sliding door 6ft semi-auto sliding door 22


Door-4ft/6ft sliding door

Door header

Rail fixed beam


Rail component
Door panel Side brush
Side brush

Door handle
Door lock

Side brush

Door guide

Door guide Bottom brush Door guide


4ft semi-auto sliding door 6ft semi-auto sliding door

23
Door-3ft right/left opening sliding door

Door header

Rail fixed beam

Rail component
Side brush
Side brush Door adapter
Door handle
Door lock

Door panel

Door guide Bottom brush Door guide


3ft right opening door 3ft left opening door

There are two types of 3ft aisle doors: 3ft right opening door and 3ft left opening door.

24
Door-sliding door header

3ft/4ft door hearder 6ft door hearder

There are two types of door header for sliding door. 3ft sliding door and 4ft sliding door share one type of door header.
The door header of 6ft sliding door is added with 1ft extended door header on both side of the 3/4ft door header.

25
CONTENTS

 Product Overview

 Aisle frame introduction

 Door system introduction

 Roof system introduction


 Accessory introduction

 Market configuration case

26
Roof

Fixed roof Shrink roof Vertical duct

足习计划
The roof of vertiv aisle containment has three types: fixed roof, shrink roof and vertical duct.

27
Roof-fixed roof

Fixed roof

Zoom in

Roof connector

Extendable beam
Fixed roof

1ft*3ft Fixed Roof


 Fixed roof is fixed on the extendable beam with two roof connector. 1ft*4ft Fixed Roof

 The fixed roof is 6mm thick Twin Wall Polycarbonate panel (UL723) with aluminum profile frame. 1ft*6ft Fixed Roof

 The minimum light transmission of fixed roof is greater than 79% . 2ft*3ft Fixed Roof

2ft*4ft Fixed Roof


 There are sealing strips on the side of the fixed roof to prevent cold and hot air mixing from the
2ft*6ft Fixed Roof
gap.

28
Roof-shrink roof

Shrink roof

Zoom in

Fixed attachment

Extendable beam Shrink roof

1ft*3ft Shrink Roof

 Shrink roof is fixed on the extendable beam with two fixed attachment. 1ft*4ft Shrink Roof

1ft*6ft Shrink Roof


 Shrink roof will shrink and drop when temperature over 57℃(135°F).
2ft*3ft Shrink Roof
 There are sealing strips on the side of the shrink roof to prevent cold and hot
2ft*4ft Shrink Roof
air mixing from the gap.
2ft*6ft Shrink Roof

29
Roof-vertical duct

Vertical duct

Duct fixed attachment

Extendable beam

Sliding panel

Fixed beam

Vertical duct panel

Vertical duct is fixed on the extendable beam with duct fixed attachment, and it is composed
of sliding panels, fixed beams, vertical duct panels and connecting accessories .
30
Roof-vertical duct
 Vertical duct can telescopic in height direct to adapt to the height of the top ceiling, the
highest top ceiling is 15ft.

 The length of the vertical duct can be expanded to adapt to the length of frame, the
telescoping range from 10ft to 16ft.

 The minimum light transmission of vertical duct is greater than 79% .

 Vertical duct frame and top ceiling are sealed to prevent cold and hot air mixing.

31
Roof-vertical duct panel

2ft x 2ft 2ft x 5ft 4ft x 5ft

1ft x 1ft Vertical Duct 2ft x 2ft Vertical Duct

1ft x 2ft Vertical Duct 2ft x 3ft Vertical Duct

1ft x 3ft Vertical Duct 2ft x 4ft Vertical Duct

1ft x 4ft Vertical Duct 2ft x 5ft Vertical Duct

1ft x 5ft Vertical Duct 3ft x 5ft Vertical Duct

2ft x 1ft Vertical Duct 4ft x 5ft Vertical Duct

 Vertical duct panel is 6mm thick Twin Wall Polycarbonate panel(UL723) with aluminum profile frame.

 There are floating nuts in the aluminum profile, and the duct panel is connected by connectors.

 The duct panel has a variety of specifications, and the vertical duct is built according to the needs. 32
Roof-vertical duct sliding panel

2ft duct sliding panel 4ft duct sliding panel

1ft Vertical Duct Sliding

2ft Vertical Duct Sliding

3ft Vertical Duct Sliding


The sliding panel is used to fill the gap between the duct panel and the top
ceiling. Secure the sliding panel on the aluminum frame of the vertical 4ft Vertical Duct Sliding

panel using floating nuts and screws.

Duct panel & sliding panel 33


CONTENTS

 Product Overview

 Aisle frame introduction

 Door system introduction

 Roof system introduction

 Accessory introduction
 Market configuration case

34
Accessory-lighting system
Motion sensor
Lighting kits

Zoom in
Lighting bracket

LED lights

Switch

 Lights are installed in the extendable beam of the aisle frame, and the cables are hidden and
deployed in the cable channel of lighting bracket.
存在的不足及后期学习计划
 The light can be turned on or off by manual switch or motion sensor.

 When the people enter the aisle, the aisle lights automatically opens by induction.

 When people leave the aisle, the aisle lights will be automatically turned off after a certain time delay.
35
Accessory-lighting system

Luminous
Requirement lx Aisle length (mm) Aisle width(mm) Theoretical Qty Actual Qty Actual luminous

500 3000 900 875 6 10 777.8

500 3000 1200 875 9 10 583.3

500 3000 1800 875 13 10 388.9

500 4800 900 875 10 16 777.8

500 4800 1200 875 14 16 583.3

500 4800 1800 875 21 16 388.9

36
Accessory-lighting system

 Each pod provides one manual light switch.

 Motion sensors become inactive when a manual


switch is pushed.

NAM EMEA
Light Switch
Motion sensor

 Each pod provides two motion sensors.

 If any of two motion sensors (each pod) detect


存在的不足及后期学习计划
movement, Lighting will illuminate.

Motion Sensor

37
Accessory-lighting system

Daylight threshold
Detection area Hold-time
Motion Sensor

 With sufficient daylight, even when motion detected, light remains OFF.
 With insufficient daylight, when motion detected, light ON.
 After the last detection and the present hold time elapsed, light OFF.

38
Accessory-floor stand

Floor

Floor Stand Gaskets


305mm floor stand

406mm floor stand

455mm floor stand

610mm floor stand


Zoom in
914mm floor stand

 Floor stand can be used to support the aisle containment on the raised-floor application.

 Floor stand is configurated height adjustment gaskets(1mm, 2mm, or 5mm) to adjust the
different floor stand in the same horizontally level.

 The aisle containment is connected with the floor stand by bolts. 39


Accessory-solid roof filled

Solid roof filled

L=3ft(900mm)/4ft(1200mm)/6ft (1200mm)

50.5mm

If the extension size of the extendable beam is less than 300mm, there is no suitable top plate and duct
to fit this size, so solid roof filled is required to form a containment environment.

40
Accessory-cantilever arm
Cantilever arm

Zoom in

Welded reinforcing plate Installation slot

 Cantilever arms are installed along the extendable beams and are distributed
symmetrically on both sides of the aisle.

 Cantilever arm is mainly used to support cables and other equipment.

 Each 10ft-16ft extendable beam can install up to 8 cantilever arms.

 The weight-bearing capacity on a single cantilever arm is 17 kg (37.5 lbs).


41
Accessory-height adapter & height adapter brush
Height adapter rail welding Height adapter connector

2U height adapter 1

1U height adapter 2 Height adapter Height adapter


Height adapter brush rail welding connector

Item Material

Height adapter Aluminum alloy

Height adapter brush Aluminum alloy + NYLON

存在的不足及后期学习计划
Height adapter and height adapter brush are used to fill the
gap in the height direction of rack and aisle frame.
42
Accessory-height adapter & height adapter brush

1U height adapter 2U height adapter Height adapter brush

1U*300mm Height Adapter 2U*300mm Height Adapter 300mm Height Adapter Brush

1U*600mm Height Adapter 2U*600mm Height Adapter 600mm Height Adapter Brush

1U*800mm Height Adapter 2U*800mm Height Adapter 800mm Height Adapter Brush

 Height adapter is installed on the horizontal extendable beams of the aisle frame.

 Height adapter can adjust it’s存在的不足及后期学习计划


size by adding or removing the adapter panel.

 Height adapter and height adapter brush have a variety of specifications,which can be
selected according to the height and width of the rack.
43
Accessory-blanking panel

Sliding

Sliding panel
It can slide by
using floating nut.

42U 42U 52U


Blank panel frame
Blanking panel
“U” position
Front view Back view silkscreen
300mm Blanking Panel

 Blanking panel is used to block the vacancies in the aisle, and the height can be
600mm Blanking Panel
adjusted within the range of 42U-52U.
800mm Blanking Panel
 Blanking panel is 6mm thick Twin Wall Polycarbonate panel(UL723) with aluminum
profile frame, and the sliding panel is a sheet metal part.
44
Accessory-alignment tool
Vertical post positioning hole
Zoom in

Zoom in

Floor stand positioning hole

Zoom in
VACS offers an alignment tool to position the left and
存在的不足及后期学习计划
right vertical posts, for the aisle with a width of 914.4
mm (3 ft.), 1219.2 mm (4 ft.), or 1828.8 mm (6 ft.).

45

You might also like