Professional Documents
Culture Documents
FRGY
FRGY
Single RAN, Rel. SRAN 16.10, Operating Documentation, Issue 03 (HTML) > BTS Descriptions > Flexi Multiradio
BTS RF Module and Remote Radio Head Description > Descriptions of RRHs Rel. 4.0
Property Value
MIMO 2TX
Interfaces
FRGY interfaces
Place the cursor over the table or module for more information.
http://10.133.137.78/SRAN 1/5
7/30/2017 Flexi RRH 2-pipe 2100 120 W (FRGY)
Power 30 W
Electrical specifications
Table: FRGY electrical specifications
Property Value
http://10.133.137.78/SRAN 2/5
7/30/2017 Flexi RRH 2-pipe 2100 120 W (FRGY)
Property Value
-57.0 V DC to -60.0 V DC
Power consumption
Table: FRGY power consumption
Mode Configuration Output power per Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values
carrier [W] depend on the final product HW and SW optimization with +/- 10% margin. Average = (6h low
hour load, 10h medium hour load and 8h busy hour load) / 24h
0.6 1.3
Property Value
Installation options
pole/wall installation
IP rating IP65
Height Core RRH: 371 mm (14.6 in) With plastic cover and mounting brackets
With upper and lower mounting brackets: 721 mm (28.4 in)
http://10.133.137.78/SRAN 3/5
7/30/2017 Flexi RRH 2-pipe 2100 120 W (FRGY)
Depth Core RRH depth without plastic cover: 169 mm (6.6 in)
With plastic cover and mounting brackets: 215 mm (8.5 in)
Environmental specifications
Table: FRGY environmental specifications
Property Value
Maximum operational outdoor temperature in the shade, assuming wind speed is 3 m/s (at +55°C (131°F)
constant high ambient temperature, maximum output power might be limited)
Maximum operational outdoor temperature in the sun, assuming wind speed is 3 m/s (at constant +50°C (122°F)
high ambient temperature, maximum output power might be limited)
Maximum indoor temperature, assuming wind speed is 0 m/s, valid for fanless products (at +45°C (113°F)
constant high ambient temperature, maximum output power might be limited)
LEDs
Table: FRGY LEDs
Red, stable Critical alarm affecting the whole RF module or all antenna carriers Fault
http://10.133.137.78/SRAN 4/5
7/30/2017 Flexi RRH 2-pipe 2100 120 W (FRGY)
Stable Red for less than 5 seconds and changes to Switched ON, but the next conditions are not reached yet No alarm
Stable Yellow
Stable Red for less than 5 seconds The module is in the process of resetting No alarm
Periodic Red and Green Antenna line faulty/degraded due to external factors (for example, VSWR Alarm
minor/major values exceeded, Antenna line device faulty/degraded)
Blinking Colors (Red, Yellow, and Green), each color Module highlighting (Flexi BTS SM functionality that can help identifying No alarm
stable for 0.5 second faulty module)
Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down.
Related resources
Parent topic: Descriptions of RRHs Rel. 4.0
http://10.133.137.78/SRAN 5/5