Professional Documents
Culture Documents
Adapta 100
Adapta 100
5.2.2.1.2 Alarm reset with acknowledgment (with the exception of emergency and
open guards)
NOTE: This action is possible only if the user logged to the system is
enabled to reset with acknowledgment.
A
PM1_05_02_002_R2-5[HMI 2018].indd
1 2
Fig. 5.2.002-04
The operator interface is started after the machine is started (see paragraph 5.9).
After turning the main switch of the remote electrical panel and the main switch of the machine
electrical panel to “1-ON”, the operator interface is started:
- Wait for the operating system to be loaded.
- Wait for the automatic start-up of the operator interface software.
- Wait for the machine configuration screen (A) to be displayed.
WARNING: This phase requires a certain time; do not operate the controls.
The sectors of the machine stations are green (correct machine configuration) and the operator
interface can be started:
A
PM1_05_02_003_R2-5[HMI 2018].indd
Fig. 5.2.003-01
B
PM1_05_02_003_R2-5[HMI 2018].indd
Fig. 5.2.003-02
The login action (to authenticate on the operator interface) can be performed by pressing the
“user” field (A) or pressing the Login button (B); in both cases, the Login window (C) appears:
(1) Enter the “User” name (see paragraph 5.2.4).
(2) Enter the “Password”.
(3) Button to confirm entry.
(4) Button to cancel the action.
(5) Button to access the password change window (see the “Changing password” paragraph);
(6) Button to “Logoff” (the system returns to the default “GUEST” level).
When a connection to the domain is configured, login can be performed with domain users or
local users and Login window (D) is displayed.
If login is performed with local user, enable LED (7) (green), otherwise disable it (grey).
A B
1 2 7
C D
PM1_05_02_003_R2-5[HMI 2018].indd
5 3 6 4
Fig. 5.2.003-03
To change the password, press button (1) to display the relevant window (A):
(1) Enter the “User” name.
(2) Enter the “Old password”.
(3) Enter the “New password”.
(4) Enter “Confirm new password”.
(5) Button to confirm entry.
(6) Button to cancel the action.
4
PM1_05_02_003_R2-5[HMI 2018].indd
5 6
Fig. 5.2.003-04
After a time with no activity, the system logs off automatically. Any time an operation is perfor-
med, the timeout counter is reset.
The period of inactivity can be set by changing the value in the field (1).
1
PM1_05_02_003_R2-5[HMI 2018].indd
Fig. 5.2.003-05
Different user groups (levels) (1) are present on the operator interface and the operator inter-
face they refer to is specified (e.g.: local interface) (2); each group can be assigned a series of
“rights” which represent the functions (complete list of system rights (3)) enabled for the group.
A series of users belong to each group (excluding “GUEST”), who have to use a username and
password to authenticate (login) to the operator interface (see next paragraphs).
When started, the operator interface gets ready to perform the functions enabled for the “GUEST”
level (user not authenticated on the operator interface, see next paragraphs).
See paragraph 5.2.3 (next paragraphs) to authenticate (login) to the operator interface and
have available the functions enabled for your user group.
NOTE: the ALARMS and/or WARNINGS that appear on the operator interface
during the production are described in paragraphs 5.4, 5.5, 5.6, 5.7 and 5.8.
1 3
2
PM1_05_02_004_R2-5[HMI 2018].indd
The list of rights shows the following in a table, for each right:
(A) The description.
(B) The enabling/disabling of the right associated with the group selected in (1).
There are 7 user groups, and it is not possible to add or delete groups.
To edit the rights (the “user right modification” right must be enabled):
- Scroll the rights listed in the table (2).
- Select the right to edit and click box (B) “Enabling” beside it twice.
1 2
A B
PM1_05_02_004_R2-5[HMI 2018].indd
WARNING: The “GUEST” group is the group that is used at interface start-
up when login has not been performed yet. If the rights associated to the
"GUEST" group are enabled, the functions associated with the right are
available WITHOUT login; furthermore, if login is performed, username
and password confirmation for critical operations are NO longer required.
NOTE: the list of rights available on the machine is found in the document
of paragraph 10.20 attached to this instructions manual.
PM1_05_02_004_R2-5[HMI 2018].indd