Professional Documents
Culture Documents
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 1 FUJITSU GENERAL LIMITED
1. Install the RNDIS driver (32- or 64-bit) on your PC.
(available on FGE FTP-Server)
2. Note:
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 2 FUJITSU GENERAL LIMITED
3. Connect the web server to the power supply and the USB
port. The web server must be connected to the PC via a
USB cable.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 3 FUJITSU GENERAL LIMITED
5. Open Mozilla Firefox
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 4 FUJITSU GENERAL LIMITED
8. Please, deactivate the proxy server .
After, you can close all windows by
click „OK“ and „Apply“
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 5 FUJITSU GENERAL LIMITED
10. If a security hint occurs: This has to be confirmed by „I know the risk“.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 6 FUJITSU GENERAL LIMITED
11. Window will more open and click at „Add exeptions“. Afterwars will pop up new window.
Please, continue with „Confirm security exception rule“. You‘ll automatically forward.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 7 FUJITSU GENERAL LIMITED
12. You‘ll forward to the following site.
Username: Administrator
Password: Password
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 8 FUJITSU GENERAL LIMITED
15. The following screen will be shown.
16. Open the menu "Home" and select from the menu on the left the web server his self. Thereafter, the sub-item
"Device information". It should be installed the latest version of firmware. Version 5.20 or higher.
> Note: Current version of the "system definition" is on FTP server of FGE available.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 9 FUJITSU GENERAL LIMITED
17. Please, check also the “System definition". These can be found on the menu at the top "File Transfer" ->
"System definition" in left menu bar. Version of "system definition" should be 2.11.1 or higher.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 10 FUJITSU GENERAL LIMITED
18. Inside of the control box of ATW indoor unit, web server is to connect to plug X86 (green) on port 1 & 2.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 11 FUJITSU GENERAL LIMITED
19. At web server, cables must be connect to port 2 & 3
Attention, do not mix cables:
20. At least connect power supply and Ethernet connection to web server.
10/11
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 12 FUJITSU GENERAL LIMITED
Set „Device web page“
1. In upper menu, choose „“Device web pages“ and click „Add“
2. If you have some web server, you can give them device numbers and click „OK“
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 13 FUJITSU GENERAL LIMITED
Set „Device web page“
4. Now, please generate the Device web page. Set a hook and click „Generate“.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 14 FUJITSU GENERAL LIMITED
Create datapoint
1. Afterwards, please switch to the menu „Home“ and click at controller in left menu.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 15 FUJITSU GENERAL LIMITED
Create datapoint
2. Now, in the left menu, you can see all parameters of controller.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 16 FUJITSU GENERAL LIMITED
Create datapoint
3. New window pop up, where you can rename your plant. Afterwards click „OK“
Copyright
Copyright
Copyright 2014Fujitsu
2015
2015 Fujitsu General
GeneralLimited.
FujitsuGeneral All
Limited.
Limited. Allrights
All reserved.
rights
rights reserved.
reserved. 16 FUJITSU GENERAL LIMITED
Create datapoint
5. In new window you have the possibility to make settings for the individual datapoints. To choose a datapoint please
click at the pencil.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 17 FUJITSU GENERAL LIMITED
Create datapoint
6. In new window choose the controller and a list with all parameters pop up, from where you can select your favorit
datapoint. Please select one. It will take over automatically.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 19 FUJITSU GENERAL LIMITED
Create datapoint
7. In the box „Datapoint adress“ is shown your select datapoint from the list. Continue with „OK“.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 20 FUJITSU GENERAL LIMITED
Create datapoint
8. On the blanc plant diagramm now is shown your selected datapoint. To add more datapoint repat the procedere . If
you finished selecting of datapoint, click „OK“ to apply them.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 21 FUJITSU GENERAL LIMITED
Create datapoint
9. Short moment after click „OK“, behind the datapoint will shown the live status of this datapoint. It will take some seconds by
receiving data.
In this area you can sort your datapoints to a group or to an uploaded plat diagramm.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 22 FUJITSU GENERAL LIMITED
Upload a picture or an plant diagramm
1. Like on page 20 you have to click the „pencil“ at the right side. A new window pop up. Click again at the „pencil“ and you can
choose your plant diagramm or another background picture (only in .gif, .jpg, .png, .htm/.html). Click „Open“ to upload it.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 23 FUJITSU GENERAL LIMITED
Upload a picture or an plant diagramm
2. Afterwards the picture will shown in the background, like in this case Fujitsu.
Solar collector
Heating circuit 1
Heat pump
Outdoor air
Buffer or
DHW tank
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 24 FUJITSU GENERAL LIMITED
Update „Firmware“ of web server (if it is not version 5.20)
1. If not, it is necessary to record the web server first with the latest firmware
The following steps must be followed:
3. Now, web server can be updated to new firmware. Continue with next step.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 25 FUJITSU GENERAL LIMITED
Update „Firmware“ of web server (if it is not version 5.20)
4. For this purpose, start the Firmware Update Tool V2.1a and select the firmware file
OZW672_V5.20.fmwz . Click "Start Update". The latest firmware is uploaded.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 26 FUJITSU GENERAL LIMITED
Update „Firmware“ of web server (if it is not version 5.20)
8. After successfully update, disconnect the device from the power supply and restart it through reconnect to
power supply. It turns again following picture. Web server is ready now. Please log in again via Mozilla
Firefox (Step 12).
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 27 FUJITSU GENERAL LIMITED
Update „System definition“ of web server
Note: Current version of the "system definition" is on FTP server of FGE available.
Please refer to next page for detailed information about file name and storage place.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 28 FUJITSU GENERAL LIMITED
Update „System definition“ of web server
1. You will find the actual version of „system definition“ at this adress onto FTP:
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 29 FUJITSU GENERAL LIMITED
Update „System definition“ of web server
1. Click at "Update" and then click "Browse" and select the appropriate file and press “Open”.
Upload complete.
2. In the table will mentioned the new version and the date of upload.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 30 FUJITSU GENERAL LIMITED
Setup Climatrix IC Cloud
Climatix IC is a web-based remote servicing system which allows analysis and maintenance any time anywhere. All
important process data are gathered continuously and saved automatically to a central or local storage. The data
gives you a decisive lead regarding know-how – ideal for sustainable business.
2. Click at Sign up
3. Enter your email address and the activation key into the mask and accept the terms. New activation key you find
into and onto carton box on a small label or into software of webserver e.g.:
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 31 FUJITSU GENERAL LIMITED
Setup Climatrix IC Cloud
4. After click “Sign up” the registration will be done and you get the massage below. After go back to start page an
click “Sign in”.
Sign in
6. You will be called upon to change your password to an own one. After, you will forwarded to the start page of
climatixic.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 32 FUJITSU GENERAL LIMITED
Setup Climatrix IC Cloud
7. At this mask, you can fill in your personal data and change the name of web server for example.
Important: Please, click at „Activate“ to set your web server online within the cloud.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 33 FUJITSU GENERAL LIMITED
Setup Climatrix IC Cloud
9. To have access to the web server, click at Operating in the menu upper. Than please choose Web access. The
web server interface will be open. Now you have complete access to the web sever.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 34 FUJITSU GENERAL LIMITED
Create new user account
1. In case, that more than one user shall have access to the web server, you can add user e.g. only state view.
2. In this case it is necessary that you have a Account at the Synco IC platform.
You get an overview about the user of your plant and the authorization of each one.
For new user click at “Add user”
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 35 FUJITSU GENERAL LIMITED
Create new user account
3. Fill in the mail address of new user and choose the authorization of him. Finish this step by click at “Save”.
The new user will get a mail where he will be informed about his new account and login data. His acces data are
the mail address and a generated password. He can access also about a link in this mail.
Copyright
Copyright 2014Fujitsu
2015 FujitsuGeneral
General Limited.
Limited.All
Allrights reserved.
rights reserved. 36 FUJITSU GENERAL LIMITED