Professional Documents
Culture Documents
Part 3 of 3
Aug 30 Posted by Juan Eusebio González Fariñas (/en/blog/blogger/listings/juan-farinas-experto-fuentes-ornamentales.html) in
Fountain components (/en/blog/categories/fountain-components.html)
7.-Draining water from architectural fountains. In most cases, a water drainage system comprises the overflow, bottom drain plug,
wall penetrations and a drain network: Read More (/en/blog/16-components-of-architectural-fountains-part-3.html)
- Overflow (/en/fountain-equipment/fountain-accessories/hydraulics/adjustable-overflow.html): The
overflow is a way of removing excess water that reaches the architectural fountain as a result of rain, faulty
operating, etc. in order to prevent overspill as far as possible and to keep a sufficient level of water in the
pond for certain nozzles (/en/fountain-equipment/fountain-nozzles.html)to work properly. There exist
overflows (/en/fountain-equipment/fountain-accessories/hydraulics/adjustable-overflow.html)whose height
can be adjusted to enable them to adapt to the different needs of each architectural fountain basin.
- Wall penetrations: these are necessary to enable the water inlet piping to the architectural
fountain to cross safely and tightly through the walls of the basin.
- Drain network: this is the series of pipes that transport the water from the overflows (/en/fountain-equipment/fountain-
accessories/hydraulics/adjustable-overflow.html)and bottom plugs.
Jet and fan nozzles: generally these nozzles are defined according to the effect they produce in the water jet: crystalline fountain
jets (/en/fountain-equipment/fountain-nozzles/crystalline-fountain-jets.html), frothy water jets (/en/fountain-
equipment/fountain-nozzles/frothy-fountain-jets.html), spray (/en/fountain-equipment/fountain-nozzles/spray-feature.html) or
spherical-shaped (/en/fountain-equipment/fountain-nozzles/spherical-shapes.html). Given the large number of nozzles that exist
on the market, this subject will be dealt with in greater detail in future posts on this blog.
Cascade Jets: waterfalls used in water fountains can be of various types, from free falling cascades in which the appearance is
of a wall of water; either continuous or artificially created using jets that are placed close to each other. The water falls cleanly
from a certain height so that the water spills onto and between natural or artificial stones, etc.
Surface channels: in Arabian style fountains, it is common to find water channels connecting two or more points of the fountain,
thereby enhancing its three-dimensionality. These channels can be built on site or prefabricated and fitted to the fountain.
Interesting water effects can be obtained if channels with varying slopes are combined to create water jumps (relatively sudden
variations in the depth of the water circuit) and also by varying cross-section width with steep slopes in the water depth.
Analyzing these channels is certainly more complicated than for pressure piping, given the uncertainty of the position of the
water surface, but that can be solved by calculation.
Water mirror: the visible surface of water in a basin is a simple example of a water mirror. The use of water mirrors enables the
fountain to maintain part of its charm even when the nozzle system is not in operation.
Jet and fan nozzles (/en/fountain-equipment/fountain-nozzles.html)can be fitted to piping as ‘rigid’ units, with swivel joints or on
‘flexible’ brackets. The latter are accompanied by a type of actuator that uses pneumatic control or underwater electric motors to
produce oscillating movements of the nozzle. Computer controlled water supply to the nozzles, actuators and the lighting enables
spectacular moving water features with coordinated color designs and music to be created.
Color filters.
The latest generation of exterior and underwater lighting systems (/en/fountain-equipment/fountain-lighting.html) in architectural
water features use LEDs (Light-Emitting Diodes), “optic fiber” and laser beams.
They produce more light per Watt of electricity than traditional incandescent bulbs.
Their response time is very short – they reach maximum power in 62 µs and, in some cases,
can be even quicker.
They produce less heat than filament bulbs and therefore provide significant energy savings.
Durability. LEDs have a long service life. In trials, they have been seen to achieve between
35,000 and 50,000 hours’ operating.
Shock resistant. LEDs are more shock resistant than filament bulbs.
11.- Other items. When it is estimated that wind speeds may exceed the maximum
acceptable limit for a water fountain, it is advisable to fit a wind gage connected to the
control system to automatically stop fountain operations partially or entirely in order to
prevent disturbance to passing persons and vehicles or water losses, etc.