Professional Documents
Culture Documents
e: info@worksitesafety.ca
w: worksitesafety.ca
Fall Protection
Equipment Inspection Checklist
You must inspect all your equipment prior to each use and follow manufacturer’s instructions.
Inspector Signature:
Completed inspection checklists must be kept on file so they are readily available for review.
Harness
Tagging Missing or unreadable
• CSA standard mark
• Lot or serial number
• Date of manufacturing
• Load limit
E
Webbing straps • Cuts, frays, abrasions, burns
• Pulled stitching
• UV damage
L
• Ink/marker/staining
• Deformation
• Corrosion
Lanyard
Tagging Missing or unreadable:
• CSA standard mark
• Lot or serial number
• Date of manufacturing
• Load limit and length
1/6
Item Deficiencies to check for: Pass Fail N/A Comments
Locking • Malfunctions
Mechanism
Lifeline
Tagging Missing or unreadable
E
• CSA standard mark
• Lot or serial number
• Date of manufacture
• Load limit and length
L
Rope • Cuts, frays, abrasions, burns
• Kinks, knots, bird-caging
• Crushed, jammed or flattened strands
SAMP
or gaps
• Diameter reduced or not uniform
• Ink/marker/staining
2/3
Item Deficiencies to check for: Pass Fail N/A Comments
Rope Grab
Jaws • Debris, sharp edges
Self-Retracting Lanyard
Tagging Missing or unreadable
• CSA standard mark
3/3