Professional Documents
Culture Documents
STEEL RULES - English PDF
STEEL RULES - English PDF
com
STEEL RULES
STEEL RULES
Cutting Rules
BODY HARDNESS EDGE HARDNESS
STEELFLEX 340 ~ HV 340 (HRC 35) ~ HV 620 (HRC 56)
STEELFLEX 380 ~ HV 380 (HRC 39) ~ HV 620 (HRC 56)
STEELFLEX 400 ~ HV 400 (HRC 41) ~ HV 620 (HRC 56)
STEELFLEX 440 ~ HV 440 (HRC 44) ~ HV 620 (HRC 56)
CB CFDB SB SFDB
Creasing Rules
EXECUTION STEELFLEX CREASING
Thickness 2pt, 3pt
Height 8.00 ~ 50.00mm / .315 ~ 1.968 (Others on request)
Bevel SR / DR Hard Body
Hardness body ~ HV 400 (HRC 41)
Special Rules
Perforating Rules
EXECUTION STANDARD AVAILABLE
Thickness 0.71 (2pt) 0.45 (1.3pt) ~ 1.42 (4pt)
Height 23.32 (0.918” ) ~ 23.80 (0.937” ) 8.0 (0.315” ) ~ 50.0 (1.968” )
Hardness HV 360 (HRC 36) HV 330 ~ 450 (HRC 34 ~ 45)
Tooth 0.5 (1/50” ) to 25.4 (1.0” )
Gullets(Ties) 0.5 (1/50” ) to 12.7 (1/2” )
Depths 2.5mm ~ 5mm
Bevel CB CFDB, SB
Color BLUE WHITE
Zipper Rules
EXECUTION STANDARD AVAILABLE
Thickness 0.71 (2pt) 1.05 (3PT)
Height 23.80 (0.937” ) 8.0 (0.315” ) ~ 50.0 (1.968” )
Body : HV 330 (HRC 34)
Hardness On request
Edge : HV 620 (HRC 56)
Kerf. 3.0 (0.118” ) (3-4 ~ 3-8)
Wave Rules
EXECUTION STANDARD AVAILABLE
Thickness 0.71 (2pt) 1.05 (3PT)
Height 23.80 (0.937” ) 23.32 (0.918” ) ~ 23.80 (0.937” )
Body : HV 330 (HRC 34)
Hardness
Edge : HV 620 (HRC 56)
Pitches
Package
All rule Types. (Except wave-edge rule, zipper rule)
THICKNESS RULE HEIGHTS
15mm 15-27mm 27-50mm
pt mm inch coil pcs coil pcs coil pcs
1.1 0.40 0.016” 100 100 100 150
1.3 0.45 0.018” 100 100 100 150
1.5 0.53 0.021” 100 130
2.0 0.71 0.028” 100 100 100 100
3.0 1.05 0.041” 70 70 60 60
4.0 1.42 0.056” 50 50 50 50
Anti-clockwise Clockwise
wound wound
Height
RULE HEIGHT HEIGHT TOLERANCE
mm INCH mm INCH
8.00 - 25.40 0.315” - 1.000” ± 0.020 ± 0.0008”
>25.40 - 50.80 >1.0000” - 2.000” ± 0.025 ± 0.0010”
Product tolerance
RULE HEIGHT THICKNESS TOLERANCE
PT mm INCH mm INCH
1.3 0.45 0.018” ± 0.015 ± 0.0006”
1.4 0.50 0.020” ± 0.015 ± 0.0006”
1.5 0.53 0.021” ± 0.015 ± 0.0006”
2 0.71 0.028” ± 0.015 ± 0.0006”
3 1.05 0.041” ± 0.020 ± 0.0008”
4 1.42 0.056” ± 0.020 ± 0.0008”
Straightness :
ts: = max. 0.5mm / 1000mm length I Flatness :
tf: =max. 5mm / 1000mm length I Cross Camber :
tc: = max. 1µm / mm width h
Certification
CHINA PLANT
No.15 youhe two road, Qiu jiagoucha village, Tongji office jimo city, Qingdao, China
Tel. +86-139-5424-3202 Fax. +86-0532-8252-7852 E-mail. iljin@iljinnts.com