This document provides specifications for a vertical multistage self-priming pump. The pump is 1 1⁄4”x1 1⁄4” in size, model HMC-5VE, runs at 3450 rpm with a 1.85Kw motor powered by 220-380v at 60hz. It can operate at liquid temperatures up to 70°C, ambient temperatures up to 40°C, with a total suction lift of up to 9mt under continuous duty. The motor is a two-pole induction motor rated for 220-380v, 3-phase, 60Hz with insulation class F and IP54 protection. The pump body is made of cast iron and stainless steel, with a cast iron motor support
This document provides specifications for a vertical multistage self-priming pump. The pump is 1 1⁄4”x1 1⁄4” in size, model HMC-5VE, runs at 3450 rpm with a 1.85Kw motor powered by 220-380v at 60hz. It can operate at liquid temperatures up to 70°C, ambient temperatures up to 40°C, with a total suction lift of up to 9mt under continuous duty. The motor is a two-pole induction motor rated for 220-380v, 3-phase, 60Hz with insulation class F and IP54 protection. The pump body is made of cast iron and stainless steel, with a cast iron motor support
This document provides specifications for a vertical multistage self-priming pump. The pump is 1 1⁄4”x1 1⁄4” in size, model HMC-5VE, runs at 3450 rpm with a 1.85Kw motor powered by 220-380v at 60hz. It can operate at liquid temperatures up to 70°C, ambient temperatures up to 40°C, with a total suction lift of up to 9mt under continuous duty. The motor is a two-pole induction motor rated for 220-380v, 3-phase, 60Hz with insulation class F and IP54 protection. The pump body is made of cast iron and stainless steel, with a cast iron motor support
Model:HMC-5VE Speed : 3450 rpm Motor Power : 1.85Kw/220-380v/60hz
Vertical multistage self-priming pumps
Operating conditions *Liquid temperature up to 70°C *Ambient temperature up to 40° *Total suction lift up to 9mt. *Continuous Duty. Motor *Two-pole induction motor (n-3450rpm)/ 220-380v/3Phase/60Hz *Insulation Class F / Protection IP54 Material *Pump Body: Cast Iron+Stainless Steel *Motor Support: Cast Iron *Shaft with rotor: AISI 416 stainless steel *Impeller: AISI304 stainless steel *Mechanical Seal: Carbon/Ceramic