Professional Documents
Culture Documents
Project : RX-16
These results are for the use of the authorized Cerberus Licensee and their client(s) only, subject to any Agreement existing between the
Parties, and subject also to the Terms and Conditions of the Cerberus License Agreement.
Summary
A1 Caution: the job can probably be performed, but may be marginal or require special attention.*
0
200
400
600
800
1000
1200
1400
1600
1800
0
200 2796.7
400
600
800
1000
1200
1400
1600
1800
2000
2830.0
1000 1000
Depth (m)
Depth (m)
1500 1500
2000 2000
2500 2500
3000 3000
Surface Weight (lb) Inclination(°) & DLS(deg/100 ft)
Producing Well
F1 Fluid calculations not available (rheology not specified).
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Working at Depth
Calculations at 2796.7 m
MD1 The maximum available overpull at 2796.7 m based on 50% of cable breaking strength is 6113 lb.
The weight indicator reading will then be 12246 lb.
This maximum overpull is 470% of the toolstring weight in air.
The recommended minimum is 150%. The absolute minimum is 75%.
The pulling capacity of the winch is 110% of the maximum weight of 12246 lb.
MD2 The maximum available overpull at 2796.7 m based on 66% of the weak point rating is 2735 lb.
The weight indicator reading will then be 7536 lb.
This maximum overpull (limited by the weak point) is 210% of the toolstring weight in air.
The recommended minimum is 150%. The absolute minimum is 75%.
1000
Depth (m)
1500
2000
2500
3000
Maximum Overpull at Cable Head (lb)
Change of Flowrate
F2 Calculation not applicable for this project.
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Tools + Cable
Toolstring Status
T1 The current tool string weight in air is 1301 lb.
T2 The minimum weight required at surface is 364 lb. This is the minimum weight needed to overcome the current well head
pressure of 0 psi, stuffing box friction of 0 lb and buoyant force of 364 lb.
T3 No additional tool weight is required.
T4 The maximum allowable tool weight in air at surface is:
- 3894 lb, based on 66% of the weak point rating of 5900 lb.
- 12250 lb, based on 50% of the cable breaking strength of 24500 lb (and ignoring any weak point).
T5 The current tool weight is 22.1% of the weak point rating and 5.3% of the cable breaking strength.
T6 The maximum tool OD is 4.875 in, and minimum well ID is 6.000 in at 2450.0 m.
The minimum tool clearance is 0.563 in either side, or 1.125 in total.
T7 The temperature is 261°F at the target depth of 2796.7 m.
T8 The pressure is 3603 psi at the target depth of 2796.7 m.
T9 There is little or no hydraulic force on the toolstring at this depth.
Cable Status
C1 The minimum predicted cable tension in normal running conditions is 288 lb at 1110.0 m with the toolstring at a measured depth
of 1128.5 m.
C2 The maximum predicted cable tension in normal running conditions is 3722 lb at surface with the toolstring at a measured depth
of 2796.7 m.
This is 15% of the cable breaking strength of 24500 lb
C5 Cable hydraulic force calculation not applicable for this project.
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Contingencies
Notes
The result indicates conditions that will probably prevent the job being performed.
The result is marginal or calls for special attention.
The result falls within the desired range.
The result is for information only and does not affect the project status.
A warning condition was detected but not included in the project status.
A caution condition was detected but not included in the project status.
The result was within the desired range, but not included in the project status.
The calculation is not applicable to the present scenario, or was excluded by the user.
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (1)
66% WkPt Lo
1000
100% WkPt Lo+Hi
Depth (m)
2000
2500
3000
Surface Weight (lb)
66% WkPt Lo
100% WkPt Lo+Hi
1000
1500
2000
2500
3000
Cable Head Tension (lb)
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (2)
1 2 3 4 5 6 Legend
RIH
POOH
500
1000
Depth (m)
1500
2000
2500
3000
Stretch (m)
1000
Depth (m)
1500
2000
2500
3000
Minimum Tractor Pull Required (lb)
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (3)
1000
Depth (m)
1500
2000
2500
3000
Pressure (psi)
1 2 3 4 5 6 7 8 9 10 Legend
RIH
POOH
500
1000
Depth (m)
1500
2000
2500
3000
Wall Contact Force (lb/ft)
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (4)
1000
Depth (m)
1500
2000
2500
3000
Axial Effective Force (lb)
6 8 10 12 14 16 18 20 22 Legend
Stress - RIH
Stress - POOH
500
1000
Depth (m)
1500
2000
2500
3000
Stress (kpsi)
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Graphs (5)
1000
Depth (m)
1500
2000
2500
3000
Maximum Overpull at Cable Head (lb)
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Input Data
RIH POOH
Cable Speed : 0.0 0.0 ft/min
Stuffing Box Friction : 0 0 lb
Wellhead Pressure : 0 0 psi
Liquid Flowrate : 0 0 BPD
Gas Flowrate : 0 0 scm/D
Force On End : 0 0 lbf
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Well Fluid Input
Section Depth (m) Fluid Name
1 2830.0 <not specified>
Fluid Name Fluid Type Rheology Model Density Viscosity Plastic Visc Yield Point Flow-Behavior Consistency Index
(lb/gal) (cp) (cp) (lb/100 ft²) Index (lb-sec^n/100 ft²)
<not specified> Liquid Newtonian 8.4 1.0 - - - -
Temperature Profile
Depth (m) Temperature (°F)
Surface - 0.0 72
Total Depth - 2830.0 263
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Data
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Point Data - Input Parameters
(cont.)
Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
40 1020.0 54.1 329.5 838.2 2.037
41 1050.0 56.0 328.9 855.4 2.032
42 1080.0 57.9 328.2 871.8 2.029
43 1092.0 58.7 328.0 878.1 2.032
44 1110.0 58.7 328.0 887.4 0.000
45 1140.0 58.7 328.0 903.0 0.000
46 1170.0 58.7 328.0 918.6 0.000
47 1200.0 58.7 328.0 934.2 0.000
48 1230.0 58.7 328.0 949.8 0.000
49 1260.0 58.7 328.0 965.4 0.000
50 1290.0 58.7 328.0 980.9 0.000
51 1320.0 58.7 328.0 996.5 0.000
52 1350.0 58.7 328.0 1012.1 0.000
53 1380.0 58.7 328.0 1027.7 0.000
54 1410.0 58.7 328.0 1043.3 0.000
55 1440.0 58.7 328.0 1058.9 0.000
56 1470.0 58.7 328.0 1074.5 0.000
57 1500.0 58.7 328.0 1090.0 0.000
58 1530.0 58.7 328.0 1105.6 0.000
59 1560.0 58.7 328.0 1121.2 0.000
60 1590.0 58.7 328.0 1136.8 0.000
61 1620.0 58.7 328.0 1152.4 0.000
62 1650.0 58.7 328.0 1168.0 0.000
63 1680.0 58.7 328.0 1183.6 0.000
64 1710.0 58.7 328.0 1199.1 0.000
65 1740.0 58.7 328.0 1214.7 0.000
66 1770.0 58.7 328.0 1230.3 0.000
67 1800.0 58.7 328.0 1245.9 0.000
68 1830.0 58.7 328.0 1261.5 0.000
69 1860.0 58.7 328.0 1277.1 0.000
70 1890.0 58.7 328.0 1292.7 0.000
71 1920.0 58.7 328.0 1308.2 0.000
72 1950.0 58.7 328.0 1323.8 0.000
73 1980.0 58.7 328.0 1339.4 0.000
74 2010.0 58.7 328.0 1355.0 0.000
75 2040.0 58.7 328.0 1370.6 0.000
76 2070.0 58.7 328.0 1386.2 0.000
77 2100.0 58.7 328.0 1401.8 0.000
78 2130.0 58.7 328.0 1417.3 0.000
79 2160.0 58.7 328.0 1432.9 0.000
80 2190.0 58.7 328.0 1448.5 0.000
81 2220.0 58.7 328.0 1464.1 0.000
82 2250.0 58.7 328.0 1479.7 0.000
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.
Survey Point Data - Input Parameters
(cont.)
Depth Inclination Azimuth True Vertical Depth Dogleg Severity
(m) (°) (°) (m) (deg/100 ft)
83 2269.8 58.7 328.0 1490.0 0.000
84 2280.0 58.0 328.0 1495.3 2.038
85 2310.0 56.0 328.0 1511.7 2.032
86 2340.0 54.0 328.0 1528.9 2.032
87 2370.0 52.0 328.0 1546.9 2.032
88 2400.0 50.0 328.0 1565.8 2.032
89 2430.0 48.0 328.0 1585.4 2.032
90 2460.0 46.0 328.0 1605.9 2.032
91 2477.7 44.8 328.0 1618.3 2.033
92 2490.0 44.0 328.0 1627.1 2.030
93 2520.3 42.0 328.0 1649.3 2.030
94 2529.2 42.0 328.0 1655.8 0.000
95 2549.0 42.0 328.0 1670.6 0.000
96 2550.0 42.0 328.0 1671.3 0.000
97 2580.0 42.0 328.0 1693.6 0.000
98 2601.1 42.0 328.0 1709.3 0.000
99 2610.0 42.0 328.0 1715.9 0.000
100 2640.0 42.0 328.0 1738.2 0.000
101 2670.0 42.0 328.0 1760.5 0.000
102 2700.0 42.0 328.0 1782.8 0.000
103 2711.9 42.0 328.0 1791.7 0.000
104 2730.0 42.0 328.0 1805.1 0.000
105 2751.5 42.0 328.0 1821.1 0.000
106 2756.8 42.0 328.0 1825.0 0.000
107 2760.0 42.0 328.0 1827.4 0.000
108 2790.0 42.0 328.0 1849.7 0.000
109 2796.8 42.0 328.0 1854.7 0.000
*These results are intended for the use of the authorized Cerberus Project : RX-16
Tool Deployment Simulation Licensee and their client(s) only, subject to any Agreement existing
TM between the Parties, and subject also to the Terms and Conditions of
Prepared on : 5/18/2022
Cerberus v 9.0.218
the Cerberus License Agreement.
*No warranty is expressed or implied by CTES
as to data results calculated by this software.