Professional Documents
Culture Documents
Applications
The blast valve PV-KK-SM/-SMX is an application of the PV-KK
blast valve for mounting on blast resistant wall surface. It is
specifically designed for installation in existing buildings where
casting of the valve frame in concrete is not possible. The valve
is also applicable to industrial applications with risk of chemical
and dust explosions.
Specification
Manufacturer of PV-KK-SM and PV-KK-SMX blast valves is
Temet Oy, Helsinki Finland.
The PV-KK-SM/-SMX blast valve block comprises three spring
balanced closing elements moving in a slot and closing the air
passage against the valve seats in response to both positive
and negative (suction) phase of the blast. The valve blocks are
mounted in structural steel frames. Test Reports
PV-KK-SM
The valve is completely corrosion resistant. The valve
Test reports no. RTE89/05 for PV-KK-SM and VTT-S-06-00231 for
closing elements are made of special non-corroding
PV-KK-SMX by VTT Technical Research Centre of Finland are
aluminum alloy, all springs are made of stainless steel, and
available upon request.
the valve body and frame made of structural steel are hot
dip galvanized.
PV-KK-SMX Installation Alternatives
All the components of the valve are made of acid-proof
steel. The version is especially designed for off-shore and The valve is designed to be installed onto the blast side of the blast
other marine applications resistant wall. The valve can be in upright or horizontal position or
on ceiling/floor.
The valve is installed on a concrete wall by means of anchor bolts of
Design Criteria type HILTI HSA M12 x 100. On a steel wall the valve can be
installed by welding or bolting using M12 machine bolts.
The PV-KK-SM/-SMX blast valve is designed for a maximum
long duration blast load with 100 kPa (1.0 bar) reflected peak Product Coding
pressure. The valve is tested with pressure waves having a
finite rise time thus simulating hydrocarbon or dust explosions.
The material, size and form of the multi-column valves are indicated
in the product code as follows.
Test and Performance Data
PV-KK-SM-number (columns x rows) for hot dip galvanized steel
The valve is verified by tests to effectively attenuate slowly PV-KK-SMX-number (columns x rows) for acid-proof steel
rising (rise time = 10…100 ms) long duration (peak duration >
1000 ms) pressure wave loads within the load range up to 100 where
kPa (1.0bar). number = total number of valve blocks
columns = number of valve block vertical columns
The valve is designed to function within the operating rows = number of valve block horizontal rows,
temperature range of -20…+200ºC. when blocks are in horizontal position as illustrated in the picture.
V00025
Temet Oy Temet product range:
Asentajankatu 3 Blast resistant & gastight doors
FIN-00880 Helsinki, Finland Custom designed protective doors
tel. +358-9-759001 Blast valves & gastight valves
fax. +358-9-785967 NBC Filters and filtration systems
e-mail: firstname.lastname@temet.fi Chemical warfare agent detection systems
internet: www.temet.com Shock protection systems
Ventilation sound attenuators
OPENING
D
B
MAX
PROTECTED BLAST
SIDE SIDE
OPENING
MAX