Professional Documents
Culture Documents
Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact
and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades
include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers,
and flame retardants.
Hytrel® thermoplastic polyester elastomer is plasticiser free.
The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont
recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.
For disposal, local regulations have to be observed.
Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool,
sporting goods, furniture, industrial and off-road transportation/equipment industry.
Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to
-40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.
Typical applications:
Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, belting
and seals, .
Funciones
Tensión de cizalla in Pa
Viscosidad in Pa s
1E2
www.campusplastics.com www.campusplastics.com
1E1 1E5
1E2 1E3 1E4 1E2 1E3 1E4
1E4
1E3 1E1
1E3
Módulo de cizallamiento dinámi in MPa
1E3
1E0
1E2
1E2
1E2
1E-1
E" in MPa
1E1
tan d in
1E1
1E-2
1E0
1E1
1E0
1E-3
1E-1
Temperatura in °C Temperatura in °C
12 -20 °C 80 -20 °C
0 °C 0 °C
23 °C 23 °C
10 40 °C 40 °C
60 °C 60 60 °C
90 °C 90 °C
6 40
20
www.campusplastics.com www.campusplastics.com
0 0
0 10 20 30 40 50 0 10 20 30 40 50
Alargamiento in % Alargamiento in %
55
Módulo de plastodeformación in MPa
4 1 h 0.5 MPa
10 h 1 MPa
50
100 h 1.5 MPa
1000 h 2 MPa
45
10000 h 2.5 MPa
3
40 3 MPa
3.5 MPa
Esfuerzo in MPa
35
2 30
25
www.campusplastics.com
20
1E0 1E1 1E2 1E3 1E4
1
Tiempo in h
www.campusplastics.com
0
0 5 10 15 20
Alargamiento in %
30
2
25
1.5 20
www.campusplastics.com
15
1 1E0 1E1 1E2 1E3 1E4
Tiempo in h
0.5
www.campusplastics.com
0
0 5 10 15 20
Alargamiento in %
45
Módulo de plastodeformación in MPa
2 1 h 0.5 MPa
10 h 1 MPa
100 h 40 1.5 MPa
1000 h
10000 h 35
1.5
30
Esfuerzo in MPa
25
1
20
www.campusplastics.com
15
1E0 1E1 1E2 1E3 1E4
0.5
Tiempo in h
www.campusplastics.com
0
0 2 4 6 8 10 12
Alargamiento in %
35 -40 °C 500 85 °C
-20 °C 100 °C
30
0 °C 110 °C
450
23 °C
25
Esfuerzo- in MPa
40 °C
60 °C 400
20
in %
90 °C
15 100 °C
350
120 °C
10
300
5
www.campusplastics.com www.campusplastics.com
0 250
0 50 100 150 200 250 0 5000 10000 15000 20000
Caracterúticas
Forma de suministro
Sémola
Demás información
Acidos
Ácido acético (5% por masa) (23°C)
Solución ácido cítrico (10% por masa) (23°C)
Ácido láctico (10% por masa) (23°C)
Ácido clorhídrico (36% por masa) (23°C)
Ácido nítrico (40% por masa) (23°C)
Ácido sulfúrico (38% por masa) (23°C)
Ácido sulfúrico (5% por masa) (23°C)
Solución ácido crómico (40% por masa) (23°C)
Bases
Solución de hidróxido de sodio (35% por masa) (23°C)
Alcoholes
Alcohol isopropílico (23°C)
Metanol (23°C)
Etanol (23°C)
Hidrocarburos
N-hexano (23°C)
Tolueno (23°C)
Iso-octano (23°C)
Cetonas
Acetona (23°C)
Éteres
Dietil éter (23°C)
Aceites minerales
SAE 10w40 aceite motor multigrado (23°C)
SAE 10w40 aceite motor multigrado (130°C)
SAE 80/90 aceite para engranajes hipocíclicos (130°C)
Aceite aislante (23°C)
Aceite de motor OS206 304 Ref.Eng.Oil, ISP (135°C)
Aceite Automático hypoid-gear Shell Donax TX (135°C)
Combustibles normales
ISO 1817 líquido 1 (60°C)
ISO 1817 líquido 2 (60°C)
ISO 1817 líquido 3 (60°C)
ISO 1817 líquido 4 (60°C)
Combustible normal sin alcohol (pref. ISO 1817 líquido C) (23°C)
Combustible normal con alcohol (pref. ISO 1817 líquido 4) (23°C)
Combustible diesel (pref. ISO 1817 líquido F) (23°C)
Combustible diesel (pref. ISO 1817 líquido F) (90°C)
Combustible diesel (pref. ISO 1817 líquido F) (>90°C)
Soluciones de sal
Solución de cloruro de sodio (10% por masa) (23°C)
Solución de hipoclorito de sodio (10% por masa) (23°C)
Solución de carbonato sódico (20% por masa) (23°C)
Solución de carbonato sódico (2% por masa) (23°C)
Solución de cloruro de cinc (50% por masa) (23°C)
Otros
Acetato etílico (23°C)
Agua oxigenada (23°C)
Fluido de freno DOT no. 4 (130°C)
Glicol etilénico (50% por masa) en agua (108°C)
1% etanol dnonylphenoxy-polyethyleneoxy en agua (23°C)
Last update: 2021-07-29 Source: https://www.campusplastics.com Página: 7/8
Hytrel® 4056 - TPC
DuPont Engineering Polymers
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying,
etc.
Test temperatures are 23°C unless otherwise stated.
DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with ™, ℠ or ® are trademarks, service marks or
registered trademarks of affiliates of DuPont de Nemours, Inc. © 2021 DuPont de Nemours, Inc. All rights reserved.
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication.
This information may be subject to revision as new knowledge and experience becomes available.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls
within the normal range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data
should not be used to establish specification limits nor used alone as the basis of design. Handling precaution information is given with the
understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Since
conditions of product use and disposal are outside our control, we make no warranties, express or implied, and assume no liability in
connection with any use of this information. As with any product, evaluation under end-use conditions prior to specification is essential.
Nothing herein is to be taken as a license to operate or a recommendation to infringe on patents.
DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.
CAUTION: DO NOT USE DUPONT MATERIALS IN MEDICAL APPLICATIONS INVOLVING IMPLANTATION IN THE HUMAN BODY OR
CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES UNLESS THE MATERIAL HAS BEEN PROVIDED FROM DUPONT UNDER A
WRITTEN CONTRACT THAT IS CONSISTENT WITH DUPONT POLICY REGARDING MEDICAL APPLICATIONS AND EXPRESSLY
ACKNOWLEDGES THE CONTEMPLATED USE.
For further information, please contact your DuPont representative. You may also request a copy of DuPont POLICY Regarding Medical
Applications... H-50103-5 and DuPont CAUTION Regarding Medical Applications... H-50102-5.