The drilling team drilled an 8.5" hole at a depth of 3738 meters measured depth (mMD) and began pumping hidens fluid. At a depth of 3750 mMD, the pressure increased, indicating the hidens fluid was passing through the drill bit. The driller then reduced the flowrate to maintain the drill string and bottom hole assembly in safe condition and prevent damage from the high pressure of the hidens fluid passing through the bit.
The drilling team drilled an 8.5" hole at a depth of 3738 meters measured depth (mMD) and began pumping hidens fluid. At a depth of 3750 mMD, the pressure increased, indicating the hidens fluid was passing through the drill bit. The driller then reduced the flowrate to maintain the drill string and bottom hole assembly in safe condition and prevent damage from the high pressure of the hidens fluid passing through the bit.
The drilling team drilled an 8.5" hole at a depth of 3738 meters measured depth (mMD) and began pumping hidens fluid. At a depth of 3750 mMD, the pressure increased, indicating the hidens fluid was passing through the drill bit. The driller then reduced the flowrate to maintain the drill string and bottom hole assembly in safe condition and prevent damage from the high pressure of the hidens fluid passing through the bit.
5” hole formation, at 3738 mMD carried out to start
pumping hidens. At depth 3750 mMD pressure was increased shown hidens passing through bit. Directly, driller reduced the flowrate to maintain BHA condition so as not to be damaged by high pressure from hidens passing through bit.