Professional Documents
Culture Documents
4
. ,!! ,!! ,!!
4
5(6(7
21581
!V
29(5/2$'
%<3$66('
4
)$,/85(
/ / /
4
9'&
3/& 3/&
2XWSXW ,QSXW
7 7 7
0 8 9 :
0 0
6WDUW
$
4 .
$
1
&RXSOLQJUHOD\FRQWUROIRU
5(6(7!VHF
Figure 15-12 Wiring of the 3RW40 2 to 3RW40 4 control circuit (with 24 V control voltage) and the
3RW40 2 to 3RW40 7 main circuit
/
)
6 4
5(6(7
29(5/2$'
21581
WRV
%<3$66('
)$,/85(
9'&
3/& 3/&
2XWSXW ,QSXW
UHPRWH5(6(7
58$
0
6WDUW
( $
4
( $
1
(1) For the permissible values for the main and control voltage (dependent on the MLFB),
refer to chapter Technical data (Page 127) .
WARNING
(2) Automatic restart.
Can result in death, serious injury, or property damage.
The start command (e.g. issued by the PLC or switch S1) must be reset prior to issuing a
RESET command because the motor attempts to restart again automatically following this
RESET command if a start command is still present. This particularly applies if the motor
protection has tripped. For safety reasons, you are advised to integrate the group fault
output (terminals 95 and 96) in the controller.
(3) Alternatively, the motor feeder can be assembled as a fuseless or fused version with type
of coordination 1 or 2. For the assignment of fuses and switching devices, refer to chapter
Technical data (Page 127)
For the optional thermistor motor protection evaluation, refer to Typical circuit for the optional
thermistor motor protection evaluation (Page 175).