Date:
31/11/2022
From,
‘The General Manager ,
Sponge div,
Pupith steels pvtltd,
Sri Kalahasthi.
To
M/S Jayam Consultants PVT.LTD,
Chennai.
‘Subject: Design Civil Drawings to New DG Room in Sponge Div.
Sir,
(Our Management is Decided to construct new DG Room and the dimensions
are 43 meter X 8 mtr, so pls prepare civil drawings to start the work, additional details are given
below
1) The building is Two Floors, Ground floor is mech., ele. Maintence and DG
Room, 1" floor is Compressor Seating Room.
2) Ground floor will be covered with RCC Slab and 1* Floor will be covered with
Roof Sheets.
3) Ground and 1" Floors was Totally open and out side only Block work we
required .
4) Load Details : a) Total 6 compressors are seating in 1” floor and total load will
be 16 to 17 tonnes.
b) Vibration load is 1 to 1.5 mm/sec Sq.
pls Study the Above points and prepare the civil drawings As soon as possible,
Thank you,