Professional Documents
Culture Documents
Furling Inverter6
Furling Inverter6
b. Locate the control panel or keypad on the inverter. It typically consists of buttons and a display
screen.
Parameter Navigation:
a. Use the arrow buttons or numeric keypad to navigate through the parameter menu.
b. Look for the parameter related to spindle settings, often labeled as "SPD" or "S" in the parameter
list.
a. Find the parameter corresponding to the frequency setting for Spindle 1. It may be labeled as "F1"
or "Fr1."
c. Enter the desired frequency value for Spindle 1 (e.g., F1 = 100 Hz) using the numeric keypad or
arrow buttons.
b. Select the F2 parameter and set the desired frequency for Spindle 2.
c. Select the F3 parameter and set the desired frequency for Spindle 3.
b. Adjust these parameters as needed to customize the behavior of each spindle. Be cautious and
refer to the manual to ensure you're modifying the correct parameters.
a. Once you have set the desired parameters for all three spindles, review the parameter list to
ensure all settings are correct.
b. If everything is as desired, exit the programming mode and save the changes. This is typically done
by pressing the "Exit" or "Save" button.
c. The inverter will usually reset or restart to apply the new settings.
It's crucial to consult the programming manual specific to the DZB312B007.52DK Fuling inverter for
accurate parameter details and functions. The manual will provide you with comprehensive
information on all available parameters and how to adjust them to suit your three-spindle setup.