Professional Documents
Culture Documents
DIN 933 4.6 / 5.6 / 5.8 / 6.8 / 8.8 / 10.9 BOLT: Technical Drawing Characteristics Reference Standard
DIN 933 4.6 / 5.6 / 5.8 / 6.8 / 8.8 / 10.9 BOLT: Technical Drawing Characteristics Reference Standard
E
d
30° Chemical composition ISO 898-1 (4.6, 5.6, 5.8, 6.8, 8.8, 10.9)
R
S
Dimensional tolerances ISO 4759-1 (Gr A / Gr B)
K L Marking ISO 898-1 (4.6, 5.6, 5.8, 6.8, 8.8, 10.9)
Mechanical properties ISO 898-1 (4.6, 5.6, 5.8, 6.8, 8.8, 10.9)
Marking (6az) Marking (6g) Surface finish ISO 10684 (HDG) or Black
Surface discontinuities ISO 6157-1
M TS M TS MTS MTS
Tightening EN 1090-2 (non-preloading)
4.6 U
5.6 U
SB
SB
4.6 SB 5.6 SB
M TS M TS MTS MTS
6.8 U
5.8 U
SB
SB
5.8 SB 6.8 SB
M TS M TS MTS MTS
1 0.9 U
8.8 U
SB
SB
8.8 SB 10.9 SB
Raw material
For raw materials, consult to the UK0045 - Raw Material Quality Class Matrix.
PRODUCT CHARACTERISTICS Page 2 of 8
Thread, mm
Dimensions, mm
Dimensions, mm
Dimensions, mm
d d d
L Grade A Grade B L Grade A Grade B L Grade A Grade B
nom min max min max nom min max min max nom min max min max
35 34,50 35,50 33,75 36,25 160 159,20 160,80 158,00 162,00 370 - - - -
40 39,50 40,50 38,75 41,25 165 164,20 165,80 163,00 167,00 380 - - - -
45 44,50 45,50 43,75 46,25 170 169,20 170,80 168,00 172,00 390 - - - -
50 49,50 50,50 48,75 51,25 175 174,20 175,80 173,00 177,00 400 - - - -
55 54,40 55,60 53,50 56,50 180 179,20 180,80 178,00 182,00 410 - - - -
60 59,40 60,60 58,50 61,50 185 184,20 185,80 183,00 187,00 420 - - - -
65 64,40 65,60 63,50 66,50 190 189,08 190,92 187,70 192,30 430 - - - -
70 69,40 70,60 68,50 71,50 195 194,08 195,92 192,70 197,30 440 - - - -
75 74,40 75,60 73,50 76,50 200 199,08 200,92 197,70 202,30 450 - - - -
80 79,40 80,60 78,50 81,50 210 - - - - 460 - - - -
85 84,30 85,60 83,25 86,50 220 - - - - 470 - - - -
90 89,30 90,70 88,25 91,75 230 - - - -
95 94,30 95,70 93,25 96,75 240 - - - -
100 99,30 100,70 98,25 101,75 250 - - - -
105 104,30 105,70 103,25 106,75 260 - - - -
110 109,30 110,70 108,25 111,75 270 - - - -
115 114,30 115,70 113,25 116,75 280 - - - -
120 119,30 120,70 118,25 121,75 290 - - - -
125 124,30 125,70 123,25 126,75 300 - - - -
130 129,20 130,80 128,00 132,00 310 - - - -
135 134,20 135,80 133,00 137,00 320 - - - -
140 139,20 140,80 138,00 142,00 330 - - - -
145 144,20 145,80 143,00 147,00 340 - - - -
150 149,20 150,80 148,00 152,00 350 - - - -
155 154,20 155,80 153,00 157,00 360 - - - -
PRODUCT CHARACTERISTICS Page 6 of 8
Mechanical properties
Property class
Mechanical properties
4.6 5.6 5.8 6.8 8.8 10.9
Tensile strength Rm MPa min 400 500 520 600 830 1040
Tensile strength under wedge loading Rm MPa min 400 500 520 600 830 1040
Stress at 0,2 % non-proportional elongation, N/mm2 Rp0,2 MPa min - - - - 660 940
Stress at 0,0048 d non-proportional elongation, N/mm2 Rpf MPa min 420 480 - -
Stress under proof load, N/mm2 Sp MPa nom 225 280 380 440 600 830
Mechanical properties
Mechanical properties