Professional Documents
Culture Documents
Operations of Signal
By
Assist. Lect. Esraa Adnan Hadi
2022/2023
Experiment No.5
Operations of Signal
1- Objectives:
The corresponding input and output signals are shown in Figure (a) and (b),
respectively. Our output signal has the same values as the original signal but spans
from n = -5 to n = 1 instead of n = -3 to n = 3. The signal shown in Figure (b) is
aptly referred to as a time-advanced signal
3- Procedure:
1) For the following sequence x(n)=[0 0 1 2 3 4 5 4 3], write a MATLAB
program to find x(-n), then plot each of the input and output signals in the same
figure?
2) For the following sequence x(n)=[2 2 2 2 0 1 1 1 1], write a MATLAB
program to find x(-n)?
3) For the following continuous- time signal y=sin (t), write a program in
MATLAB simulation to find the time scaling where, k=2 and k=0.5 for t=0 to 4
pi?
4) For the following continuous- time signal y=sin (2 pi t), write a program in
MATLAB simulation to find the time shifting where, k=+2 and k=-2 for t=0 to
4?
4- Discussion