For monitoring TRH load table, c’ RAHHP is adapted in such way to support ethernet connection mode: RAHHP:RP=ALL;
For monitoring PGW load c’ RRPGP prints the current, average and peak values of Central Processing Unit (CPU) load for one, several or all PGW RPs : RRPGP:RP=ALL;
IP Transport, Virtual Ethernet Interface, Print: IHIFP:VIF=ALL;
IP Transport, SCTP Association Connection List, Print IHCLP:EPID=ALL,SAID=ALL;
Check A Interface Over IP Status: RRAIP;
IP Port Connection Information IHCOP:IPPORT=ALL;
IP Port State IHSTP:IPPORT=ALL;
IP Transport Route Definition IHRDP:IPPORT=ALL;
SCTP Association List IHALP:EPID=ALL;
SCTP Layer Parameters IHSLP;
SCTP ASSOCIATION DATA IHSAP:SAID=<said>;
M3UA Routing Specification M3RSP:DEST=ALL;
M3UA Association State Print M3ASP:SAID=<said>;
SCCP BUFFER C7BPP;
CCITT7 SIGNALLING POINT DATA C7SPP:SP=ALL;
SCCP State and configuration C7NCP:SP=ALL,SSN=ALL;