Professional Documents
Culture Documents
SS 03
SS 03
1. High strength bolts (HSB) are galvanized while mild steel bolts
(MSB) are electro plated (yellow chromate conversion).
These bolts are marked on the heads so that they can be easily
identified.
A 175 x 6 175 x 6 C
175 x 6 2. The correct type of bolts must be used as called for on the
175 x 6 921-1000x5 1000-921x5
details. Using wrong type of bolts may cause building failure at
400 - 921 x 5 921 - 400 x 5 TOP FLANGE the erector's responsibility.
TOP FLANGE 175 x 6 175 x 6
WEB 175 x 6 967 967 175 x 6 WEB 3. Continuous machine submerged arc weldings (S.A.W.) meet
the applicable requirements of the American Welding Society
GE 6000 6000 BOTTOM FLAN
BOTTOM FLAN 1500 300 300 1500 GE (A.W.S.) D1.1-2004.
STF 6. Flange butt welds are on both sides with copper back-up.
STF WELD JOINT CR-01 WELD JOINT Flanges 19mm or thicker are beveled prior to assembly.
ROLLER CONNECTION PLATE-01
PINNED CONNECTION PLATE-01 STF
7. Gusset plates for flange braces are welded on both sides of
ANCHOR BOLTS
ANCHOR BOLTS the column and rafter, however flange braces are required at
one side (unless noted otherwise). For aesthetic reasons,it is
preferable to install them all at the same side of column and
rafter. The side chosen depending on erection sequence.
8259
8259
7620
7604
R.C.C COLUMN R.C.C COLUMN
(BY OTHER) (BY OTHER)
G
IN
AW
DR
AL
OV
PR
AP
610 6401 610 5563 610
CLEAR HEIGHT
CLEAR HEIGHT
13184 C/C OF R.C.C COLUMN
EAVE HEIGHT
EAVE HEIGHT
00 APR 01,2014 ISSUED FOR APPROVAL HSB MFA MGH
REV. NO DATE DESCRIPTION DRN CHK APP