Professional Documents
Culture Documents
Assembly
Datasheet
178554 Rev. D
Bently Nevada Machinery Condition Monitoring
Description
The design of the PROXPAC XL Proximity Transducer Assembly
is similar to our 31000/32000 Proximity Probe Housing
Assemblies. The assembly offers the same advantages and
features as the 31000 and 32000 housings for accessing and
externally adjusting proximity probes. However, the housing
cover of the PROXPAC XL Assembly also contains its own 3300
XL Proximitor sensor. This design makes the PROXPAC XL
Assembly a completely self-contained proximity probe
system, and eliminates the need for an extension cable
between the probe and its associated Proximitor sensor. It
also eliminates the need for a separate Proximitor housing, as
the field wiring connects directly between the monitors and
PROXPAC XL Assemblies.
The PROXPAC XL housing is made of Polyphenylene Sulfide
(PPS), which is an advanced, molded thermoplastic. This
material replaces the steel and aluminum in previous
housings offered in the Bently Nevada product line. It also
incorporates glass and conductive fibers in the PPS to
strengthen the housing and more effectively dissipate
electrostatic charges. The PROXPAC XL housing is rated for
Type 4X and for IP66 environments and provides extra
protection in severe environments.
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
2/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
3/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
4/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
Compliance and
Certifications
FCC
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
EMC
EN 61000-6-2
EN 61000-6-4
EMC Directive 2014/30/EU
RoHS
RoHS Directive 2011/65/EU
Maritime
ABS 2009 Steel Vessels Rules
1-1-4/7.7,4-8-3/1.11.1,4-9-7/13
5/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
ia Class I, Zone 0: AEx/Ex ia IIC T4/T5 Ga; Ui= -28V Uo= -28V
Class I, Groups A, B, C, and D,
When installed Class II, Groups E, F and G, Ii= 140mA Io= 140mA
with Class III;
intrinsically Pi= 0.91W Po= 0.742W
safe zener T5 @ Ta= -55°˚C to + 40°˚C.
barriers per T4 @ Ta= -55°˚C to + 80°C. Ci- 47nF Co= 1.5nF
drawing 141092
or when Li= 1460µH Lo= 610µH
installed with
galvanic nA,ec
isolators.
II 3 G
Ex nA IIC T4/T5 Gc
nA, ec Class I, Zone 2: AEx/Ex nA IIC T4/T5
Gc; Ex ec llC T4/T5 Gc
When installed Class I, Division 2, Groups A, B, C, and
without D; Ui= -28V li= 140 mA
barriers per Class I, Zone 2: AEx/Ex ec llC T4/T5 T5 @ Ta= -55˚ C to + 40˚C
drawing Gc; T4 @ Ta= -55 ˚C to + 80˚C
140979. Class I, Division 2, Groups A, B, C, and
D;
T5 @ Ta= -55°C to + 40°C 3300 XL Probe
T4 @ Ta= -55°C to + 80°C
6/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
nA,ec
II 3 G
Ex nA IIC T5…T1 Gc,
Ex ec llC T5…T1 Gc,
(see Temperature Schedule
Hazardous Area Conditions of
table to follow) Safe Use
Ui= -28V li= 140 mA CSA/NRTL/C:
ia
Temperature Schedule
Install per Bently Nevada drawing 141092.
Temperature Ambient Temperature nA, ec
Classification (Probe Only)
Install per Bently Nevada drawing 140979.
For EPL Ga and Gc
ATEX/IECEx:
T1 -55°C to +232°C
ia
T2 -55°C to +177°C
-55°C to +120°C
Install per Bently Nevada drawing 141092.
T3
nA, ec
T4 -55°C to +80°C
The Prox must be installed so as to provide the
T5 -55°C to +40°C
terminals with a degree of protection of at least
For EPL Dc IP54.
T280°C @ Ta -55°C to +232°C
7/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
Examples
Order -00 or –01 (for multi approvals)
for the A option and –00 or -000 for all 000 No probe sleeve
other options to receive just a spare
housing with Proximitor Sensor. 037 3.7 in (94 mm)
Examples
00 No standoff adapter
8/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
050 50 mm
9/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
10/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
11/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
Figure 1: Frequency Response with Different Field Wiring Lengths without Barriers (1 m System)
12/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
13/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
Figure information
l "B" plus "C" dimensions greater than 305 mm (12.0 in) require additional sleeve support near the
probe to stiffen the assembly and avoid the influence of resonance.
l For desired probe penetration lengths of less than 51 mm (2.0 in), order a separate Individual
Standoff Adapter. The effective probe penetration length will then be reduced by the length of the
Individual Standoff Adapter, plus an additional 13 mm (0.5 in) due to the NPT thread engagement.
o Example:The customer desires a probe penetration length of 25 mm (1.0 in). To do this,
they order a 330800 housing with CXXX (probe penetration) option of 0 3 0 [76 mm (3 in)]
and a separate individual standoff adapter that is 38 mm (1.5 in) in length (part number
109319-015). The standoff adapter would cover 38 mm (1.5 in) of the probe sleeve, plus an
additional 13 mm (0.5 in). Therefore, the effective probe penetration length would drop to 25
mm (1.0 in).
l "B" plus "C" dimension represents mid-setting distance between mounting surface and target
surface. Threaded sleeve allows ±12.7 mm (0.5 in) adjustment from this point. "B" plus "C"
dimension is 760 mm (30 in) maximum.
14/15
PROXPAC XL Proximity Transducer Assembly
Datasheet 178554 Rev. D
Bently Nevada, Proximitor, Proxpac and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes
Business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company.
All other product and company names are trademarks of their respective holders. Use of the trademarks does not
imply any affiliation with or endorsement by the respective holders.
Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not
make any representation as to the accuracy or completeness of the information and makes no warranties of any
kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness
for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect,
consequential or special damages, claims for lost profits, or third party claims arising from the use of the
information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make
changes in specifications and features shown herein, or discontinue the product described at any time without
notice or obligation. Contact your Baker Hughes representative for the most current information.
The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to
change without prior notice. It is being supplied as a service to our customers and may not be altered or its content
repackaged without the express written consent of Baker Hughes. This product or associated products may be
covered by one or more patents. See Bently.com/legal.
15/15