Professional Documents
Culture Documents
System
Datasheet
Bently Nevada Machinery Condition Monitoring 174014 Rev. J
Description
The 3300 XL 50 mm Transducer System consists of a separate
50 mm probe, an extension cable, and a 3300 XL 50 mm
Proximitor Sensor. The large diameter coil gives this system a
maximum linear range of 27.9 mm (1100 mils), the longest
linear range of our eddy current transducer line. This linear
range makes the 3300 XL 50 mm Transducer System ideal for
measuring the differential expansion (DE) or rotor expansion
(RX) of large steam turbine generators that results from the
difference in growth rates between the turbine rotor and the
machine stator (casing).
The 3300 XL 50 mm probe comes in three case The 3300 XL 50 mm Proximitor Sensor has the
& thread configurations to physically replace same advanced features as all 3300 XL
all standard 7200 50 mm systems (including Proximitor Sensors. Its thin design allows it to
side and rear exit probes). The standard 7200 be mounted in either a high-density DIN-rail
style mounting brackets are still available as installation or a more traditional panel mount
accessories. In addition, a new bracket to configuration. Improved RFI/EMI immunity
adapt the probe to the 50 mm DE Integral allows the 3300 XL Proximitor Sensor to achieve
transducer sliding mount base is also available. European CE mark approvals without any
The Proximitor Sensor has a 0.394 V/mm (10 special mounting considerations. This RFI
mV/mil) output that is identical to that of the immunity prevents the transducer system from
7200 and 50 mm DE Integral systems, which being adversely affected by nearby high
allows customers to upgrade without requiring frequency radio signals. SpringLoc terminal
any changes in the monitor configuration. strips on the Proximitor Sensor require no
When upgrading from previous systems, every special installation tools and facilitate faster,
transducer system component (probe, highly robust field wiring connections.
extension cable, and Proximitor Sensor) must
be replaced with 3300 XL 50 mm components. Proximitor Sensors are supplied by
default from the factory calibrated to
Proximity Probe and Extension Cable AISI 4140 steel. Calibration to other
target materials is available upon
request.
The 3300 XL 50 mm probe is designed to survive
the harshest steam turbine DE environments. It
can continually operate and maintain its
accuracy in high temperatures up to 200 °C Mounting Accessories
(392 °F), and can withstand intermittent high
temperatures up to 250 °C (482 °F). The 50 mm The correct operation of the transducer system
probe has both a front and rear seal which, must be initially verified during installation and
combined with the High Temperature FluidLoc periodically thereafter. This is done by
cable (standard on all 50 mm probes), prevent physically moving the transducer to simulate
moisture from entering the probe tip. Special the motion of the shaft collar. This requires a
high-temperature ClickLoc connectors are also mounting bracket that allows the transducer
standard on the probe and extension cable. system to slide relative to the shaft rotor and
Each probe and cable comes with connector collar.
protectors and a disposable connector
An optional Sliding Bracket can be ordered for
protector installation tool to ensure that the
the 50 mm Transducer for both single
connectors remain free of contamination. The
transducer and complementary input
ClickLoc connector on the probe lead features
applications. This mounting bracket allows you
a removable collar that facilitates routing the
to verify the transducer system and gap the
cable through tight clearances.
probes by sliding the transducer system
The 3300 XL 50 mm probe is available in straight through its linear range. The base plate of the
exit case styles with ½-20 English threads or sliding bracket is installed on the inner surface
M14x1.5 metric threads, including a locknut with of the turbine case near the differential
predrilled safety wire holes. The side exit probe expansion collar. Probes are installed in the
has two ¼-20 mounting holes in the rear of the probe clamp that attaches to the sliding
probe case. For both straight exit and side exit carriage. The sliding carriage slides onto and is
probes the overall case diameter is 1.99 inches. secured to the base plate with bolts and safety
wire. To verify and install the transducer, loosen
the bolts securing the sliding carriage to the
2/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
base plate and move the sliding carriage and 27.9 mm (1100 mils). Linear range
probes. A verification kit with spindle begins at approximately 1.3 mm
micrometer can be temporarily secured to the Linear (50 mils) from target and is from
base plate to provide a reference for axial Range 1.3 to 29.2 mm (50 to 1150 mils)
verification measurements. The spindle (approximately –1.5 to –12.5
micrometer measures the movement of the Vdc).
transducer system relative to the collar during
these verification tests. Average
Scale 394 mV/mm (10 mV/mil)
Factor nominal
Specifications (ASF)
Deviation
Unless otherwise noted, the following
from best
specifications are for a 3300 XL 50 mm Less than ±0.74 mm (±29 mils)
fit straight
Proximitor Sensor, extension cable and probe
line (DSL)
between 0°C and +45°C (+32°F to +113°F) at a
maximum altitude of 2000m, with a -24 Vdc Over a probe temperature range
power supply, a 10 kΩ load, a Bently Nevada of -35°C to +120°C (-31°F to
supplied AISI 4140 steel target that is 102 mm +248°F) with the Proximitor
(4.0 in) diameter or larger. The system Sensor and extension cable
accuracy and interchangeability specifications between 0°C to +45°C (+32°F to
do not apply when using a transducer system System
+113°F), the DSL remains within
calibrated to any target other than a Bently performan
±2.03 mm (±80 mils).
Nevada AISI 4140 steel target. ce over
extended
Over a Proximitor Sensor and
Electrical temperatur
extension cable temperature
es
range of -35°C to +65°C (-31°F to
Proximitor Accepts one non-contacting
+149°F) with the probe between
Sensor 3300 XL 50 mm Proximity Probe
0°C to +45°C (+32°F to +113°F),
Input and Extension Cable.
the DSL remains within ±2.03
Requires -17.5 Vdc to -26 Vdc mm (±80 mils).
without barriers at 12 mA
Recomme
maximum consumption, -23
nded 102 mm (4.0 in) diameter (flat
Power Vdc to -26 Vdc with barriers.
Minimum target)
Operation at a more positive
Target Size
voltage than -23.5 Vdc can
result in reduced linear range.
Resistance
Output from Center
50 Ω Probe Length
resistance to Coaxial
Conductor
Extension Probe DC
cable Resistance 1.0 m 6.4 ± 0.5 Ω
69.9 pF/m (21.3 pF/ft) typical
capacitanc
e 5.0 m 7.6 ± 0.8 Ω
3/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Mechanical Recommended
Finger tight
torque
Probe Tip
Polyphenylene Sulfide (PPS). Maximum
Material 0.565 N•m (5 in•lb)
torque
Probe Case
AISI 304 stainless steel (SST). Minimum Bend
Material
Radius (with or
25.4 mm (1.0 in)
75 Ω triaxial, without SST
perfluoroalkoxyethylene Armor)
Probe Cable (PFA) insulated FluidLoc
Specifications probe cable in the following Environmental Limits
total probe lengths: 1, 5 or 9
metres. Probe Temperature Range
75 Ω triaxial, Operating
Extension perfluoroalkoxyethylene -35°C to +200°C (-31°F to
and Storage
Cable Material (PFA) insulated +392°F)
Temperature
FluidLoccable.
Short-term
Proximitor Operating +250°C (+482°F) for less than
A380 aluminum
Sensor Material and Storage 24 hours.
Temperature
Sliding Bracket Anodized aluminum and
Material stainless steel Extension Cable Temperature Range
5 or 9 metres including Operating
System Length
extension cable and Storage --51°C to +200°C (-31°F to
Temperature +392°F)
Probe and
Extension Flexible SST with PFA outer
Cable Armor jacket. Proximitor Sensor Temperature Range
(optional)
Operating -51°C to +100°C (-60°F to
Tensile 330 N (75 pounds) probe Temperature +212°F)
Strength case to probe lead. 270 N (60
(maximum pounds) at probe lead to Storage -51°C to +105°C (-60°F to
rated) extension cable connectors. Temperature +221°F)
4/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Operating
-35°C to +200°C (-31°F to
and Storage
+392°F)
Temperature
5/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Compliance and
Certifications
FCC
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
EMC
EN 61000-6-2
EN 61000-6-4
EMC Directive 2014/30/EU
RoHS
RoHS Directive 2011/65/EU
Maritime
ABS 2009 Steel Vessels Rules
1-1-4/7.7,4-8-3/1.11.1,4-9-7/13
6/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
cNRTLus ATEX/IECEx
3300 XL Proximitor Sensor 3300 XL Proximitor Sensor
7/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Temperature Schedule
T1 -55°C to +232°C
T2 -55°C to +177°C
T3 -55°C to +120°C
T4 -55°C to +80°C
T5 -55°C to +40°C
For EPL Dc
8/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
C: ArmorOption
00 No Approvals
05 Multiple Approvals
9/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Each Sliding Mounting Bracket comes with: (2) The B01 probe mounting bracket option is
only available with the A01 or A02 probe clamp
l One sliding plate style options.
l One base plate
l Sliding plate securing bolts with safety (3) The B02and B03 probe mounting bracket
wire holes options are only available with the A03 probe
l Lock washers clamp style options.
(4) When replacing 50 mm DE 130713, part
The material used for the mounting
number 330879-AA-00 should be ordered.
brackets is T6061-T6 aluminum. Base
Ordering with BB=00 will prevent unnecessary
plate securing bolts are not
parts from being ordered with the clamp.
provided; recommended bolt size is
3/8in or M8 socket head bolts.
Sliding Mounting Brackets without
clamps
3300 XL 50 mm Sliding Probe
Bracket and Clamp Single Transducer Mounting
131071-01
Bracket
330879-AA-BB Short Complementary Input
131030-01 Differential Expansion (CIDE)
Mounting Bracket
A: Probe Clamp Style
10/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
in. or 0 to 50 mm range
l two set screws B: Micrometer Option
l a bracket securing bolt
Standard English 0-2 inch
01
The material used for the verification kit micrometer
bracket is T6061-T6 aluminum.
Standard metric 0-50 mm
02
Verification Kit, Spindle micrometer
131036-01
Micrometer with English Units
11/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
12/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
13/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
14/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
15/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
16/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
17/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
18/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
19/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
20/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
21/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
22/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
23/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
24/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
25/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
26/27
3300 XL 50mm Proximity Transducer System
Datasheet 174014 Rev. J
Bently Nevada, M2, Proximitor and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes business, in
the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company. All other
product and company names are trademarks of their respective holders. Use of the trademarks does not imply any
affiliation with or endorsement by the respective holders.
Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not
make any representation as to the accuracy or completeness of the information and makes no warranties of any
kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness
for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect,
consequential or special damages, claims for lost profits, or third party claims arising from the use of the
information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make
changes in specifications and features shown herein, or discontinue the product described at any time without
notice or obligation. Contact your Baker Hughes representative for the most current information.
The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to
change without prior notice. It is being supplied as a service to our customers and may not be altered or its content
repackaged without the express written consent of Baker Hughes. This product or associated products may be
covered by one or more patents. See Bently.com/legal.
27/27