Professional Documents
Culture Documents
嚣盟E
田��缸
L1 Left Stick
TURBO
Right Stick
CLEAR
R1 Charging Indication
。 。
1. Charge under c nnecti n state
。
When connect the charging cable, the HOME and ABXY lights flash
once/2 seconds, all lights keep n when it is fully charged
GameSir Website GameSir Facebook
2. Charge under sleeping state
。 。 。 。,
When connect the charging cable, the gamepad wakes up and enters
※Pr duct Specificati n D Pad current m de, no signal received after 1 minute, m de signal indicators
turn o何HOME and ABXY Button lights start flashing, all lights keep on
B when it is fully charged
GameSir-T1s P『oduct GameSir-T1s Advanced Edition Model No GameSir-T1s
Name
,。
Sleeping Function
。
w rking
。
20C -65C 1. The gamepad enters sleep state after 1-minute disconnection
w rking Temp
w,。rking
iOS I Android I PC I PS3 2. The gamepad is power off after 10-minute n action
Plattorms
20 80%
Humidity
啕
。
Connect gamepad with any device first, press L2+R2+R3,and then
。 /。
Working Ap1刘e iOS I Android Standard I PS3 I Connection Bluetooth I press D-pad Up I Down butt n to adjust the brightness of lights
Modes Mouse Simulation I Xinput Types 2.4GHz/V叭red
Android Apple IGS 。 。
M use Simulati n Xinput Turn n ff LED Lights
QR Code Charging
Voltage
3.7V- 5.2V Charging
Time
2 - 3 Hou「S 'W' • • >< 。
Press L1 + R1 button for 5 seconds t turn on/o何the button light
。
Press Turbo + RighULeft button of the D-pad to increase/decrease the
Turb Frequency
Warning Statement
This equipment has been tested and found to comply Caution: Any changes or modifications to this device not
with the limits for a Class B digital device, pursuant to explicitly approved by manufacturer could void your
part 15 of the FCC Rules. These limits are designed to authority to operate this equipment.
provide reasonable protection against harmful
interference in a residential installation. This This device complies with part 15 of the FCC Rules.
equipment generates, uses and can radiate radio Operation is subject to the following two conditions: (1) This
frequency energy and, if not installed and used in device may not cause harmful interference, and (2) this
accordance with the instructions, may cause harmful device must accept any interference received, including
interference to radio communications. However, there interference that may cause undesired operation.
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause The device has been evaluated to meet general RF exposure
harmful interference to radio or television reception, requirement. The device can be used in portable exposure
which can be determined by turning the equipment off condition without restriction.
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.