This document provides technical details of a 25 kg bag filling machine including its weighing, elevator, and bagging sections. The weighing section uses stainless steel buckets and plates to weigh and transfer material between buckets up to a total system height of 11.5-12 feet. The elevator section uses a screw conveyor up to 20 feet long to lift material between stainless steel buckets. The bagging conveyor section is about 3 meters long to transfer material onto bags at a motorized speed of up to 40 rpm.
This document provides technical details of a 25 kg bag filling machine including its weighing, elevator, and bagging sections. The weighing section uses stainless steel buckets and plates to weigh and transfer material between buckets up to a total system height of 11.5-12 feet. The elevator section uses a screw conveyor up to 20 feet long to lift material between stainless steel buckets. The bagging conveyor section is about 3 meters long to transfer material onto bags at a motorized speed of up to 40 rpm.
This document provides technical details of a 25 kg bag filling machine including its weighing, elevator, and bagging sections. The weighing section uses stainless steel buckets and plates to weigh and transfer material between buckets up to a total system height of 11.5-12 feet. The elevator section uses a screw conveyor up to 20 feet long to lift material between stainless steel buckets. The bagging conveyor section is about 3 meters long to transfer material onto bags at a motorized speed of up to 40 rpm.
Storage Bucket : 30” x 30” x 36” Machine Head Make : Union Special (China) Weigh Bucket : 18” x 18” x 12” Machine Fitting Head : Local Made M S Feeding Bucket : 12” x 12” x 8” Steel. Motor RPM : 3 Phasic/ 1800 RPM. Discharge Bucket : 12” x 18 “ Sewing Capacity : 200 ~ 550 B P Her. Capacity : 60 Kg Controller Power : 440 50 Hz VAC Total System Height : 11.5 ~ 12 Feet Drive Motor Capacity : ABB 0.75Kw. (Lot) All Bucket Material : SS. 304 Stand Bucket Plate Thickness : 2.5 to 3 mm (All Fabrication Powder Cutting Material Structure Material : MS Pipe 3” MS) Powder Cutting Height : 1000 mm Quantity : 01(Unit)
ELEVATOR : (01)↓ Mechanical Detail
Type : Screw Type. Inlet Screw Conveyor 304 Length : 20’ ( 6000 mm) Inlet Gate Coarse & Fine With Bucket : 2.5' x 2.5' x 2.5' Vibrater if Required S Steel 304 Pipe Dia : Ø 150 mm. Storage Bucket : 200 kg Capacity S Screw Shaft : Ø 50 mm Steel 304 Gear Motor : 20 ~ 80 RPM (Lot) Nick Grip SS Motor Capacity : 380 ~ 440 VAC 50/60Hz. Frame MS With Powder Cutting Motor Power : 2.2Kw. Motor Controlling : VFD Drive Screw Material : SS 304 Bucket Material : SS 304 Pipe , Screw , Shaft , Bucket Plate Thickness : 2.5- 3 mm Structure Material : MS Pipe 3” Powder Cutting
BAGGING CONVEYOR (01)↓
(All Fabrication Powder Cutting Material MS) Conveyor Size : W 400mm X L 3050mm X H 300 mm. ±100mm. Roll Size : 40 x 350 mm. Motor Speed : 0 ~ 40 Rpm Gear motor. (Lot) Motor Capacity : Fix Gear Motor 1.5Kw. (Lot) Quantity : 01(Unit)