You are on page 1of 3

07.11.

2022 İngilizce soruları Berk NAYIR

**The movement of the engine means that the entire piston has to move up and down inside the
_______ cylinder which also has cold lubricating oil and offers much resistance.
a. Engine
b. Low pressure
c. Gas
d. circular
e. Solid

** Filling the ballast tanks with seawater is----------------- ---------.


a) immersing
b) de-ballasting
c) ballasting
d) bunkering
e) stabilizing
**the main engine of a ship is connected to its propeller with the help of a shaft. this whole system
along with other.
a. Pumping
b. Propulsion
c. Cooling
d. Feed
e. Transmission

**A“manometer”measures:
a)Airpressure
b)Steam pressure
c)Oilpressure
d)Waterpressure
e)Oiltemperature

**There is lub oil moving part it is a ________ state when engine is operation, and the same oil is
thicked when engine is cold.
A)cold
B)warm
C)hot
D)chilly
E)clammy
**Only if ______ reservations in advance _______ all the major sites in the city.
A)we had made / could we have visited
B)had we made / would we have visited
C) we had made / we could visit
D)we made / we could visit
E) had we made / we would have visited
** The type of propulsion system used in a ship depends on several factors such as speed power
and ship ____.
a) Type
b) Bottom
c) side
d) Hull

** Everyone is coming, ____?


a) İs it
b) isn’t it
c)are they
d) aren’t they
e) hatırlayamadım bunu

**the double bottom in a vessel is a space comprised of ______________.


a. Compartments beetween the inner and outer bottoms
b. Plating forming the engine room tank top
c. Doubler plating installed over the flat keel plate
d. A watertight boundary formed by the inner bottom
e. Margin plates and scandings

**Emergency generator olmayan gemilerde, emergency durumda hangisi kullanılır ?

a. Shaft Generator
b.Port generator
c. Auxiliary Generator
d. Emergency Generator
e. Magneto

**What is the name of the fixed part that creates the magnetic field in dynamos?

A) Inductor
B) Armature
C) Brush
D) Collector
E) Bed
**Which of the following is done to change the excitation current and the speed in shunt-connected
direct current motors?
A) If we increase the excitation current, the number of revolutions will increase.
B) If we reduce the excitation current, the number of revolutions will decrease
C) If we reduce the excitation current too much, the number of revolutions will not change.
D) If we reduce the excitation current too much, the number of revolutions will increase a lot.
E) Changing the excitation current does not change the number of revolutions.

** What is the name of the part that is also called coal in dynamos?
a) rotor

B) collector

C) Brush
D) Armature

E) inductance

You might also like