Professional Documents
Culture Documents
EV2305DS-00A
4.75V to 23V IN, 2A OUT
Synchronous Buck Converter
TM
The Future of Analog IC Technology
EVALUATION BOARD
DESCRIPTION FEATURES
The EV2305DS-00A is the evaluation board of • Up to 2A Output Current
MPS’ MP2305 synchronous buck converter. It • Wide 4.75V to 23V Operating Input Range
has a wide supply range from 4.75V to 23V and • Monolithic Synchronous Buck with 130mΩ
a continuous output current up to 2A. It features High-Side and Low-Side FETs
synchronous rectification for high efficiency with • Fixed 340KHz Frequency
integrated high-side and low-side power • All Ceramic Input and Output Capacitors
MOSFETs. The output voltage is preset to 3.3V, • Programmable Soft-Start
but can be easily adjusted to other levels from • Programmable Input Under Voltage Lockout
0.923V. Current mode control and integrated
power MOSFETs minimize component counts, APPLICATIONS
board area, and solution cost. Fault condition
• Distributed Power Systems
protections include cycle-by-cycle current limiting,
• Networking Systems
thermal shutdown and under-voltage lockout.
Programmable soft-start reduces turn-on stress. • FPGA, DSP, ASIC Power Supplies
Small SO-8 package minimizes board area. • Green Electronics/ Appliances
• Notebook Computers
ELECTRICAL SPECIFICATIONS “MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
Parameter Symbol Value Units
Supply Voltage VIN 4.75 to 23 V
Output Voltage VOUT 3.3 V
Output Current IOUT 0 to 2 A
85 VOUT = 2.5V
80
75
70
65
60
55
50
(L x W x H) 2.0” x 1.5” x 0.5” 0 0.5 1.0 1.5 2.0 2.5
(5.0cm x 3.8cm x 1.2cm) LOAD CURRENT (A)
MP2305-EC01
SW VOUT
3.3V/2A
D1 C5
OPEN OPEN
EV2305_S01
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.