Professional Documents
Culture Documents
LA4705 SanyoSemiconDevice
LA4705 SanyoSemiconDevice
Monolithic Linear IC
LA4705
15 W 2-channel BTL AF Power Amplifier
for Car Stereos
Features
. High power: supports total output of 25 W + 25 W
= 14.4 V, THD = 30%, R = 4 Ω)
. (VLess pop
CC L
. Designed noise
for excellent sound quality
(f < 10 Hz, f = 130 kHz)
. Any on time settable by external capacitor
L H SANYO : SIP18H
. Standby switch circuit on chip (microprocessor supported)
. Various protectors on chip
(output-to-ground short/output-to-VCC short/
load short/overvoltage/thermal shutdown circuit)
. NF capacitorless
. Supports RL = 2 Ω
Specifications
Maximum Ratings at Ta = 25°C
Parameter Symbol Conditions Ratings Unit
Maximum supply voltage VCC max 1 No signal, t = 60 s 24 V
VCC max 2 With signal 18 V
Surge supply voltage VCC surge t % 0.2 s, single giant pulse 50 V
Allowable power dissipation Pd max Arbitrarily large heat sink 37.5 W
Operating temperature Topr –35 to +85 °C
Storage temperature Tstg –40 to +150 °C
Pd max – Ta θf – Sf
Allowable power dissipation, Pd max – W
No.3848 -2/8
LA4705
No.3848 -3/8
LA4705
No.3848 -4/8
LA4705
PO – VIN PO – VCC
Output power, PO – W
Output power, PO – W
Input level, VIN – Vrms Supply voltage, VCC – V
PO – VCC THD – PO
0 dBm = VG 40 dB
Response – dB
No.3848 -5/8
LA4705
Output power, PO – W
Input frequency, f – Hz Input frequency, f – Hz
SVRR – VCC SVRR – f
Ripple rejection ratio, SVRR – dB
Power dissipation, Pd – W
Current drain, ICC – A
No load
Unit (resistance: Ω)
Locus when ON
BTL output DC locus AC Level
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment,
nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or
indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
1 Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors
and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and
expenses associated with such use:
2 Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO
ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume
production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use
or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of December, 1996. Specifications and information herein are subject to change without notice.
No.3848 -8/8