Professional Documents
Culture Documents
Spesification
Fuse Cut Out Polymer
Office: Factory:
Jl. Kedoya Duri Raya, Jl. Raya Cikande Rangkasbitung KM 5,2
No.56E, Jakarta Barat Kawasan Buditexindo
11520 Kel. Junti, Kec. Jawilan, Kab. Serang
Banten 42177
T : (021) 22586660 T : (0254) 8409888
F : (021) 22586660
E : info@suryamulia.com
www.suryamulia.com
SPLN D3.026:2017
7 Applicable Standard
About Us
IEC 60282-2 : 2008-04
PT. Surya Mulia Anugerah was established in 2018 with the brand "SUQMA
electric" and the factory located in Cikande, Serang, Indonesia.
PT. Surya Mulia Anugerah has received an ISO 9001 certification for its
Quality Management System and comply with SPM-LMK for its product
standards certification from PT. PLN (Persero).
Fuse Cut Out is a production equipment that works in the event of current
surges or overloads. The specifications are as follows:
Technical Particular and Guarantee Product Fuse Cut Out Polymer 24kV
No. Description Unit Technical Particular
1 Rated Voltage kV 24
3 Rated Frequency Hz 50
4 Insulation Level
a) Impulse Resistance Voltage 1.2/50µs kV 125
b) Power Frequency Resistance Voltage kV 50
Bracket
Terminal Atas
1
Mur Penjepit Fuse Link
Kabel Fuse Link
5. Pasangkan kabel fuse link
Bagian Bawah melalui jalur pada flipper dan
Fuse Tube mengelilingi (searah jarum jam)
baut penjepit kabel fuse link
6. Pertahankan flipper pada posisi
maksimal ini dan kencangkan
baut penjepit kabel fuse link
dengan menggunakan kunci.
7. Potong kelebihan kabel fuse link
dengan jarak ± 13mm dari baut
penjepit kabel fuse link