You are on page 1of 4

FRONT SUSPENSION

E SUSPENSION

SECTION
FRONT SUSPENSION
FSU B

FSU
CONTENTS
FRONT SUSPENSION ASSEMBLY ........................... 2 Wheel Alignment (Unladen*) .................................... 4 F
Components ............................................................. 2 Ball Joint ................................................................... 4
SERVICE DATA AND SPECIFICATIONS (SDS) ........ 4 Wheelarch Height (Unladen*) ................................... 4
G

Revision: 2005 September FSU-1 C11


FRONT SUSPENSION ASSEMBLY

FRONT SUSPENSION ASSEMBLY PFP:54010

Components GES00016

PEIA0071E

Revision: 2005 September FSU-2 C11


FRONT SUSPENSION ASSEMBLY

1. Cap 2. Strut mounting insulator 3. Strut mounting bearing


4. Coil spring 5. Bound bumper 6. Strut
A
7. Steering knuckle 8. Stabilizer connecting rod 9. Stabilizer clamp
10. Stabilizer bushing 11. Stabilizer bar 12. Upper link (left)
B
13. Upper link (right) 14. Front suspension member 15. Member stay
16. Transverse link
Refer to GI-9, "HOW TO USE THIS MANUAL" , for the symbols in the figure.
C

FSU

Revision: 2005 September FSU-3 C11


SERVICE DATA AND SPECIFICATIONS (SDS)

SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030

Wheel Alignment (Unladen*) GES0001C

Minimum – 0° 55′ (– 0.92°)

Camber Nominal – 0° 10′ (– 0.17°)


Degree minute (Decimal degree) Maximum 0° 35′ (0.58°)
Left and right difference 45′ (0.75°) or less
Minimum 3° 50′ (3.83°)

Caster Nominal 4° 35′ (4.58°)


Degree minute (Decimal degree) Maximum 5° 20′ (5.33°)
Left and right difference 45′ (0.75°) or less
Minimum 9° 10′ (9.17°)
Kingpin inclination
Nominal 9° 55′ (9.92°)
Degree minute (Decimal degree)
Maximum 10° 40′ (10.67°)
Minimum 0 mm (0 in)
Total toe-in Distance (A - B) Nominal 1 mm (0.04 in)
Maximum 2 mm (0.08 in)
*: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

Ball Joint GES0001D

Swing torque 0.5 - 4.9 N·m (0.06 - 0.49 kg-m, 5 - 43 in-lb)


Measurement on spring balance 15.4 - 150.8N (1.6 - 15.4 kg, 34 lb)
Axial end play 0 mm (0 in)

Wheelarch Height (Unladen*) GES0001E

SFA746B

Tire size 185/65R15


Front (Hf) 684 mm (26.93 in)
Rear (Hr) 686 mm (27.01 in)
*: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.

Revision: 2005 September FSU-4 C11

You might also like