Professional Documents
Culture Documents
DFWG-7861-1-en-0611
2 After-sales service Double vane flap
After-sales service
Ordering spare parts
When ordering spare parts, please refer to the information on the following pages.
Please note that special manufacturing and delivery specifications are frequently
applied to Bühler and non-Bühler parts, and that the spare parts supplied by Bühler
always conform to the latest state of technology.
Ordering instructions
An order for spare parts must include the following information:
Note:
These order details are required to prevent incorrect deliveries.
If a part being ordered cannot be distinguished clearly, please include a dimen-
sional sketch and a description.
When ordering spare parts that do not have part numbers, be sure to include the
subassembly no. and, in place of the part no., the parts list item number.
Motors and drives:
Please include the motor or drive number when enquiring about or ordering spare
parts.
Contact
Bühler AG
Customer Service Grain Processing
CH-9240 Uzwil, Switzerland
Telefon: +41 71 955 30 40
Telefax: +41 71 955 33 05
service.switzerland@buhlergroup.com
Bühler AG
Customer Service Engineered Products
CH-9240 Uzwil, Switzerland
Telefon: +41 71 955 22 44
Telefax: +41 71 955 36 60
customerservice@buhlergroup.com
Designation Description
E1 Critical spare parts
Parts that can cause the entire machine to fail if they fail or become defec-
tive.
Onsite stock required.
E2 Moderately critical spare parts
Parts that can greatly limit the functionality of the machine if they fail or
become defective.
Onsite stock required.
E3 Non-critical spare parts
Parts that only slightly limit the functionality of the machine if they fail or
become defective.
Defined delivery date.
V Wear part
Onsite stock required.
Table of contents
11 DFWG-40020-010 E Key 1 ST
15 DFWG-80007-150 E Seal 1 ST
17 UXN -56001-020 E Deep-groove ball bearing D 30/55x13 2 ST
26 UXN -58002-020 E Bearing bush D 30/34x20 2 ST
28 UXM -56013-011 E Adjusting drive LA31 EX II 3D IP66 X 2 ST
33 UXN -44007-106 E Sealing ring D 47/30x5 4 ST