Professional Documents
Culture Documents
Long-goods stacker 2m
TAGD
TAGD-7980-2-en-0509
2 After-sales service Long-goods stacker 2m
After-sales service
Ordering spare parts
When ordering spare parts, please refer to the information on the following pages.
Please note that special manufacturing and delivery specifications are frequently
applied to Bühler and non-Bühler parts, and that the spare parts supplied by Bühler
always conform to the latest state of technology.
Ordering instructions
An order for spare parts must include the following information:
Note:
These order details are required to prevent incorrect deliveries.
If a part being ordered cannot be distinguished clearly, please include a dimen-
sional sketch and a description.
When ordering spare parts that do not have part numbers, be sure to include the
subassembly no. and, in place of the part no., the parts list item number.
Motors and drives:
Please include the motor or drive number when enquiring about or ordering spare
parts.
Abbreviations
V = wear part
E = spare part
Contact
Bühler AG
Ersatzteildienst Grain Processing
CH-9240 Uzwil, Switzerland
Fax +41 71 955 34 17
Bühler AG
Ersatzteildienst Engineered Products
CH-9240 Uzwil, Switzerland
Fax +41 71 955 36 60
Table of contents
Pos. 37 UNS -16081-084 E Solenoid valve 5/2-way DN 8 SXE 0573-160-00B without coil
38 UNS -16029-115 E Single base plate G 1/4"
39 UNN -10161-001 E Plug VSTI R 1/8"-ED
41 UNN -20007-025 E Fork joint 1/74019 M10x1.25
42 UNN -20022-021 E Swivel joint I-41 D 32
43 UNN -14014-107 Shaft end disk D 8.5/40x6 galv.
45 UNN -18000-119 E Heavy-type spring pin 8x18
48 UNN -18000-128 Heavy-type spring pin D 8x35
50 UNN -10008-156 Hexagon bolt M6x25 galv.
51 UNN -10008-211 Hexagon bolt M8x12 galv.
52 UNN -10008-214 Hexagon bolt M8x20 galv.
53 UNN -10008-216 Hexagon bolt M8x25 galv.
54 UNN -10143-087 Threaded rod M8x 100 galv.
55 UNN -10060-386 Countersunk screw M8x16
59 UNN -10043-020 Cheese head screw M5x16 galv.
60 UNN -10043-042 Cheese head screw M8x12 galv.
63 UNN -12001-154 Hexagon nut M6 galv.
64 UNN -12001-156 Hexagon nut M8 galv.
68 UNN -12016-005 Locknut M8 galv.
70 UNN -14000-003 Washer D 6.4/12x1.6 galv.
71 UNN -14000-005 Washer D 8.4/16x1.6 galv.