The document contains configuration commands for a S3230-1040 device. It sets the IP address, gateway, VLAN, port settings and resets the device. It configures the management interface, sets the port speeds and duplex settings and enables MAC learning.
The document contains configuration commands for a S3230-1040 device. It sets the IP address, gateway, VLAN, port settings and resets the device. It configures the management interface, sets the port speeds and duplex settings and enables MAC learning.
The document contains configuration commands for a S3230-1040 device. It sets the IP address, gateway, VLAN, port settings and resets the device. It configures the management interface, sets the port speeds and duplex settings and enables MAC learning.
S3230-1040 C0|S0|L1D> set ip type=ipv4 addr= X.X.X.X subnet-mask=255.255.255.0 S3230-1040 C0|S0|L1D> set gateway type=ipv4 addr X.X.X.X S3230-1040 C0|S0|L1D> show ip-mgmt config S3230-1040 C0|S0|L1D> set mgmt vlan vid 2016 S3230-1040 C0|S0|L1D> set transparent lpt state enable (faltaba, para activar el tlpt) S3230-1040 C0|S0|L1D> set system name level3 (faltaba, para el nombre) S3230-1040 C0|S0|L1D> set mgmt vlan port 2
S3230-1040 C0|S0|L1D> go l1p 2
S3230-1040 C0|S0|L1P2> set port vlan tag mode network S3230-1040 C0|S0|L1P2> set port dot1-state fallback S3230-1040 C0|S0|L1P2> set ether phymode phy100BaseFX (faltaba velocidad para el administrador) S3230-1040 C0|S0|L1P2> show port vlan config S3230-1040 C0|S0|L1P2> show port vlan tag config
S3230-1040 C0|S0|L1P2> home ----> se devuelve al dispositivo
S3230-1040 C0|S0|L1D> set mgmt vlan state enable
S3230-1040 C0|S0|L1D> show mgmt vlan state enable
S3230-1040 C0|S0|L1D> go l1p 1
S3230-1040 C0|S0|L1P1> set ether autoneg state disable S3230-1040 C0|S0|L1P1> set ether speed 100M S3230-1040 C0|S0|L1P1> set ether duplex full S3230-1040 C0|S0|L1P1> show ether config S3230-1040 C0|S0|L1P1> home
S3230-1040 C0|S0|L1D> show port mac_learning state
S3230-1040 C0|S0|L1D> reset factory (resetear de fabrica el dispositivo)