You are on page 1of 2

NO: MB2018CC-9

DATE: 6/27/18
TO: Original Equipment Manufacturers
FROM: Copeland™ Marketing – Refrigeration
SUBJECT: Release of New Electronic Controllers

Emerson is pleased to announce updates to the Electronic Unit Controller (EUC). These
changes will assure improved and more reliable electrical connections to the control, and
improved usability.

The time-out setting has been increased to 30 seconds from 15 seconds to allow more
time to make adjustments. This will prevent the control from exiting the programming
mode during short pauses.

The top green connector used for the transducer connection has been reinforced to
maintain a more secure connection.

Old Connector New Improved Connector

Emerson, 1675 W. Campbell Road, Sidney, OH 45365


937-498-3011 • Emerson.com
Unused ¼ inch push-on terminals have been removed from all EUC controls. These
terminals are not used and cause extra force required to install the wire harness
connection.

Old Controls New Controls

Old Control New Control Description


543-0132-01 543-0132-02 115v non- fan cycle
543-0133-01 543-0133-02 230v non- fan cycle
543-0134-01 543-0134-02 115v with fan cycle
543-0135-01 543-0135-02 230v with fan cycle

Emerson, 1675 W. Campbell Road, Sidney, OH 45365


937-498-3011 • Emerson.com

You might also like