Professional Documents
Culture Documents
Silo - Tips - Oil Treatment Arras Maxei
Silo - Tips - Oil Treatment Arras Maxei
Liq uid o il
tance between the transformer’s connec- ume*. 1 0
Vap o r wat er
tions and the terminals can be respected. This restores the oil dielectric strength 1
Vap o r o il
to a value in excess of 75 kV after 0,1
0,01
Operating principle
The pre-filtered dielectric fluid enters the
plant through an inlet strainer, and then
passes through an inlet oil pump and into
Options an oil heater, where it is heated by im-
mersion heaters.
Road trailer
Cart After a first filtration 6 µ absolute
through cartridge filter, the dielectric
fluid is sprayed into a vacuum chamber
on a basket of degazing rings.
Finally, after elimination of the air bub-
bles, the clean treated fluid flows through
the outlet oil pump.
Main characteristics
Nominal flow* during treatment in l/h 2,000
Plant components.
- 1 Inlet oil motor-pump.
Options - 1 Direct electrical heater.
Telecontrol - 1 Cartridge filter 6µ absolute.
- 1 Dehydration tank.
System of on-line measuring of - 1 Outlet oil vacuum motor-pump.
moisture content - 1 Trap system of free gases.
Cartridge filter 1µ absolute - 1 Single-staged vacuum motor-pump.
- 1 Set measuring, controlling, alarming and regulating apparatus
Digital recording of the treat- - 1 Control panel with display and PLC
ment parameters - 1 Set pipes, valves and accessories for the connection of the plant to the transformer.
Continuous control of the oil - 1 Set of 6 hoses with flanges (5 hoses ∅25 , length : 10 m and 1 hose ∅25 , length : 2 m ).
level in the transformer. - 1 Set of automatic valves to isolate the transformer
- 1 Section iron plate with retention tray and maintenance wheels.
I–BETH39GB_C page 3/6 OIL TREATMENT TYPE MAS 2000 TEC
ARRAS MAXEI
Plant description
Inlet pump
Continuous control of the temperature of the plant at oil inlet,
Maximum flow of pump in l/h 4,000
before degazing chamber and at oil outlet.
Pump type Centrifugal
Remote control of the overheating through security thermostat.
Discharge rate in mCE 30
Motor power in kW 2.2 Permanent control of the overpressures in the network thanks to
Rotation speed in rpm 1,500
pressostat, security valve and by-pass.
Pump building Cast iron/steel
Flows display at inlet, before degazing (regulation and mini-
Connection diameter in mm 25 mum flow) and outlet of the plant .
Oil heating Continuous control of the oil levels and condensats in the plant.
Total heating power in kW 31
Automatic regulation of foaming effects.
Number of thermo dippers 4
Power of an element in kW 7.8 Bi-filtration through strainer (0,8 mm), filtration before de-
gazing (1 filter 6µm absolute).
Filtration 6 µm absolute
Number de cartridges per filter 3 Remote control of filters clogging with pressostat.
Number of filter 1
Vacuum control with Pirani gauge and manometer.
Filter building Cast iron/steel
Outlet pump
Maximum flow of pump in l/h 2,500
Control panel
ARRAS MAXEI oil treatment plant type MAS 2000 TEC is equipped with a watertight
panel of industrial type in painted cast iron, with PLC, contactors, relays, terminal boards,
and every cables necessary for the plant operation.
On the door of the control panel stand the operating desk, the switches and the warning
lights of the different components.
Painting
ARRAS MAXEI oil treatment plant type MAS 2000 TEC is painted in white (RAL9002).
Approximate dimensions
Length in Width in Height in Weight in
mm mm mm kg
Plant on platform with tarpaulin 2950 1900 2298 2600
G3
Optional : on-line water content measuring
V23
B3 (JN3)
Mano 4
V2
V14
RASCH
SCD
B7 (JN7) VP9
T1 T2
V20
DM
SCAH DEGAZ
VP2
VP4
RAO1 PT1
SCAB
M3D
V1
G1
B4 (JN4)
B2 (JN2)
M2
VP1
PS2 T°2
Oil level in MAS NHG
B1 (JT1,CI1) retention tray
VP11 F2 CAR1
CAR2
I–BETH39GB_C page 5/6
P2
V18
Low symetrical connection
V19' V17
Low transformer valve V16 V15
G4
Oil level in V19
Alarm switch transformer
Buchholz warning
MAS 2000 TEC (optional)
switch : NO
: NO Auxiliairy outlet for MAS draining in tanks
1 µm absolute filtration (optional)
or standard treatment outlet
ARRAS MAXEI
OIL TREATMENT
TYPE MAS 2000 TEC
Optional features
The process controls AUTOMATIC DRAINING OF THE VALVE
This option enables an optimal protection of the vacuum net of the plant.
VOLTMETER / AMMETER
This option will enable you to visualize the power supply of the plant, as well as the strength developed in order to protect the net
and equipment.
REMOTE CONTROL
The remote control enables to be informed of the plant operation through an internal phone line, a TELECOM phone line, or through
the GSM network.
RECORDER
This option enables to record the physical parameters of the degassing process like temperature and vacuum level.
CONTINUOUS MOISTURE CONTENT MEASURING
This option has been designed to carry out on-line moisture content measurement, that means continuously during the oil treatment.
Then you reduce the errors linked to the sampling method and the risks due to hot oil handling.
REGENERATION
This option enables to regenerate the oil and to decrease its acidity thanks to absorbent and colloidal properties product.
Digital recorder
Telecontrol GSM
Road trailer with metallic cover Low speed trailer with tarpaulin Skid with tarpaulin