Professional Documents
Culture Documents
BMK LTM1045 1 en
BMK LTM1045 1 en
LTM 1045/1
• Outline of components with identification (BMK)
TECHNICAL DATA:
COMPONENTS:
07 / 2002
BMK components
CARRIER UW-13
Kundendienst-Schulung LWE (VMS) D:\1045_1\Trennblätter_1045_1.p65
Kundendienst-Schulung LWE (VMS) 15/07/02• ED D:\1045_1\BMK-Bauteile UW_1045_1.p65
Contents: Carrier
BMK - Table (-A1 to -E38) ................................................................................... 3 Automated power shift gear: .......................................................................... 32
BMK - Table (-E39 to -L5) .................................................................................... 4 ZF 12 AS 2302 (without intarder) ....................................................................... 32
BMK - Table (-M1 to -U50) ................................................................................... 5
BMK - Table (-X35 to -Y31b) ................................................................................ 6 Hydraulic pumps: ............................................................................................. 33
BMK - Table (-Y32a to -Y149) .............................................................................. 7 Outline, inversion block ..................................................................................... 33
A ......... Sub-assemblies, partial sub-assemblies -B38 .... Negative pressure sensor, air filter 0 to -0,08bar / 4,5V - 0,5V ............. 30
-A1 ...... ECU actuator ...................................................................................... 32 -B46 .... Needle displacement sensor (100 Ohm at 20° C) ................................ 26
-A4 ...... Clutch actuator w. 4 solenoid contr. valves and displacement sensing . 32
-A7 ...... Inductive sensor output speed ............................................................. 32 E ......... Lighting devices
-A8 ...... Display unit driver’s cab ...................................................................... 15 -E1 ...... Blinker, RR .......................................................................................... 10
-A9 ...... Keyboard unit ...................................................................................... 15 -E2 ...... Blinker, RL .......................................................................................... 10
-A10 .... E / A module 1 ZE 0, LSB 1 address 2 ............................................... 18 -E3 ...... Stop light, RL ...................................................................................... 10
-A11 .... E / A module 2 ZE 0, LSB 1 address 3 ............................................... 18 -E4 ...... Stop light RL ....................................................................................... 10
-A12 .... E / A module 3 (behind), ZE0 LSB 1 address 4 .................................... 11 -E5 ...... Parking light, L ...................................................................................... 9
-A13 .... E / A module 4, ZE0 LSB 1 address 5 ................................................ 12 -E6 ...... Tail light,L ........................................................................................... 10
-A14 .... E / A module 5 ZE 0, LSB 1 address 6 ............................................... 18 -E7 ...... Registration plate light, RR, option ...................................................... 10
-A17 .... LH engine ECU 4 ................................................................................ 18 -E9 ...... Parking light, FR ................................................................................... 9
-A26 .... Interval relay wind-screen wiper ........................................................... 20 -E10 .... Tail light, R .......................................................................................... 10
-A29 .... Relay box Telma ................................................................................. 37 -E11 .... Registration plate light, RL .................................................................. 10
-A32 .... Wheel speed ECU .............................................................................. 18 -E13 .... Reversing light, L ................................................................................ 10
-A33 .... Timing relay interior lighting ................................................................. 17 -E14 .... Blinker,FL ............................................................................................. 9
-A50 .... Control unit SG1577 ............................................................................ 47 -E15 .... High beam, FL ...................................................................................... 9
-A51 .... Heater Thermo 90S ............................................................................. 47 -E16 .... Low beam, FL ....................................................................................... 9
-A57 .... Fuel preheating, 300W, 12,5A at 24V .................................................. 28 -E17 .... Low beam, FR ...................................................................................... 9
-A62 .... Fuse box external supply 230V ........................................................... 45 -E18 .... High beam, FR ...................................................................................... 9
-A73 .... Outrigger control panel R ..................................................................... 11 -E19 .... Blinker, R .............................................................................................. 9
-A74 .... Outrigger control panel L ..................................................................... 12 -E20 .... Side marking light, L ............................................................................. 9
-A75 .... EDC actuator ...................................................................................... 25 -E22 .... Fog lamp, FL ........................................................................................ 9
-A90 .... Component support ............................................................................. 20 -E23 .... Fog lamp .............................................................................................. 9
-E24 .... Fog trail light, L ................................................................................... 10
B ......... Converters, non electric / electric -E25 .... Reversing light, R ................................................................................ 10
-B2 ...... Oil pressure sensor, 0 - 10 bar / 0 - 5V ............................................... 27 -E27 .... Warning beam, FL ................................................................................ 9
-B5 ...... Pressure sensor, supply service brake, brake circuit 1 ........................ 21 -E77 .... Side marking light, R ............................................................................ 11
-B6 ...... Pressure sensor, supply service brake, brake circuit 2 ........................ 21 -E28 .... Warning beam, FR ................................................................................ 9
-B7 ...... Pressure sensor, supply parking brake ............................................... 21 -E29 .... Contour light RR .................................................................................. 10
-B8 ...... Pressure sensor, service brake, brake circuit 1 ................................... 21 -E30 .... Contour light ....................................................................................... 10
-B9 ...... Pressure sensor, service brake, brake circuit 2 ................................... 21 -E31 .... Contour light, FL ................................................................................... 9
-B10 .... Gas pedal sensor, (double angle sensor) 0° = 4 mA 25° = 20mA ........ 15 -E32 .... Contour light, FR ................................................................................... 9
-B19 .... Inclination sensor ................................................................................ 44 -E33 .... Fog tail light, R ................................................................................... 10
-B35 .... Speed sensor, (540 Ohm at 20° C, in displacement direction right) ..... 27 -E36 .... Interior lighting, L ................................................................................ 13
-B36 .... OT-sensor, (540 Ohm at 20° C, in displacement direction left) ............. 27 -E37 .... Interior lighting, centre ......................................................................... 13
-B37 .... Charge pressure sensor, 0 - 5bar / 0 - 5V ............................................ 26 -E38 .... Interioir lighting, R ............................................................................... 13
Carrier:
Front view, lighting and mirrors
-E28 -E27
warning beacon, warning beacon, FL
FR
-E32
contour light, FR
-E31
contour light
FL
-M25
drive mirror -M23
adjustment vert. drive mirror
adjustment vert.
-M26
drive mirror -M24
adjustment horiz. drive mirror
adjustment horiz.
-E41
mirror heating -E40
40W mirror heating
40W
-E20
-E50 side marking
blinker light,
side, R L
-E5
parking light, L
-E14
blinker,
FL
Carrier:
Rear view, lighting
-E11
registration
plate light, RL
-E4
stop light,
RL
-E3
-E151 stop -H105 -E150
track keeping light warning signal track
light, L RL at reversing keeping
light, RR
-X180 -X35
socket socket
trailer, 12V trailer, 24V
-E13 -E25
reversing reversing
light, L light, R
Carrier:
Outrigger control panel, side marking lights right
-A12
E/A module 3 -A73
(behind), outrigger
ZE0 LSB 1 address 4 control panel
R
Carrier:
Outrigger control panel, side marking lights left
-EMERGENCY-OFF
-E127
lighting -E49 -E43 -E57 -E76
outrigger
FL blinker side marking side marking side marking
side L light L light L light L
-A13 -A74
E/A module 4, outrigger
ZE0 LSB 1 address 5 control panel
L
Driver’s cab:
Interior lighting, screen wash pump
-H107 -H109 -H108
loudspeaker L radio loudspeaker R
-M10
E-motor,
screen wash
pump
-S134 -S135
door contact door contact
switch left switch right
Driver’s cab:
Heater-, ventilator-, wiper drives
-M4 -M20
drive actuator air,
ventilator / heat exchanger foot space / screen
-M21
actuator
water circulation
engine / driver’s cab
-M2
motor
wind-screen
wiper
-M19
actuator
circulated /fresh air
-S19
-A8 -P11 -A9 mirror
display unit tachygraph keyboard adjustment
unit
-P14
working hour
counter
Driver’s cab:
Centre console - main switch, batteries
fuses voltage converter
-F80
-S106 fuse
battery battery box
main switch 80A
-G1
battery
-G2
battery
-U50
-F81 voltage converter 24V
fuse 100A, / 12V 3A radio
for heating flange
R9
-F79
fuse 50A,
for superstructure
(D30L, LICCON,
heating)
Driver’s cab:
Centre console - fuses, relays
Driver’s cab:
Centre console - E / A modules, ECUs
-A32
wheel speed
ECU
-A17
LH engine ECU 4
-A10
E / A module 1
ZE 0, LSB 1
-X292 address 2
diagnostic
connector,
engine
-A14
E / A module 5
ZE 0, LSB 1
address 6
Driver’s cab:
Centre console - heating flange control -K132
heating flange
(engine cold start device)
ON
-R25
resistance 0,47 Ohm,
series resistance for
steering -e-motor from
superstructure
heating flange
-F87
overvoltage protection
frame engine
Driver’s cab:
Centre console - components
-F85
fuse 10A,
return signal
heating flange
ON
-A90 -R48
component resistance,
support power source LSB 2
(only at option LSB 2)
-A26
-X49
interval relay wind-
screen wiper -R49 -R22 -R26
CAN final resistance, resistance,
resistance power source suspension
LSB 1
Pneumatic system:
Bulkhead plate, pressure sensors, manometric switches
-B9 -B7
pressure sensor, pressure sensor,
service brake supply
brake circuit 2 parking brake
-B8
-S116 pressure sensor,
manometric switch 0,5 E, service brake
at P > 0,5 bar = 1 brake circuit 1
= stop light ON
(contactor)
-B6
-S114 pressure sensor,
manometric switch 5,6 A, supply
parking brake service brake
at P < 5,6 bar = 1 brake circuit 2
= parking brake applied
(breaker)
-B5
pressure sensor,
supply service
brake
brake circuit 1
-Y2a
2-way valve,
inversion to
OW mode
-Y148
parking brake OW, -Y2b
1 = released, 2-way valve,
0 = applied inversion to
UW mode
-Y3
2-way valve,
crane hydraulics
1 = ON
Pneumatic system:
ABV control units
-Y43 -Y44
ABV control unit for ABV control unit for
wheels axles 2 and 3 wheels axles 2 and 3
left right
cylinder for
exhaust flap brake
hydraulic pump
steering circuit 1
hydraulic pump
steering circuit 2
compressor
-R9
heating flange
admission air,
(cold start
device)
1,9 KW,
approx. 0,3 Ohm at 20 °C
pneumatic connection
crane hydraulics ON
-S121
inductive sensor, -G3
crane hydraulics OFF generator
-X339
-B46
needle-type
displacement sensor
(100 Ohm at 20° C)
-X295
-R18
oil
temperature
sensor
0 °C = 5,5 K Ohm
10 °C = 3,5 K Ohm
20 °C = 2,3 K Ohm
30 °C = 1,6 K Ohm
40 °C = 1,1 K Ohm
50 °C = 0,77 K Ohm
60 °C = 0,55 K Ohm
70 °C = 0,4 K Ohm
80 °C = 0,3 K Ohm
-X284 90 °C = 0,22 K Ohm
connector, 100 °C = 0,17 K Ohm
EDC 110 °C = 0,13 K Ohm
actuator 120 °C = 0,1 K Ohm
130 °C = 0,08 K Ohm
140 °C = 0,06 K Ohm
-X278
-X283 -B36
-R14 OT sensor,
coolant (540 Ohm at 20° C,
temperature top view in displacment
sensor direction left)
0 °C = 5,5 K Ohm
10 °C = 3,5 K Ohm
20 °C = 2,3 K Ohm
30 °C = 1,6 K Ohm
40 °C = 1,1 K Ohm
50 °C = 0,77 K Ohm
60 °C = 0,55 K Ohm
70 °C = 0,4 K Ohm
80 °C = 0,3 K Ohm
90 °C = 0,22 K Ohm
100 °C = 0,17 K Ohm
110 °C = 0,13 K Ohm
120 °C = 0,1 K Ohm
130 °C = 0,08 K Ohm
140 °C = 0,06 K Ohm
150 W
X1
=F+F3
heater
HEIZUNG
-A57
X2
-X171
=F+F3
-A57 -X170 2
bottomUNTEN
ANSICHT view 86 87
30
=Z58 2k2 C
85 86 R1 B
-A120 V1
87a 2k2
R2 E
87
30 87a 85
=Z58+P26 X1
-X11 2 -X11 3
/120.1 /120.1 -H115
X2
=Z58+F3
-X171 2
**
oil filter /121.8
fuel dehydration
KRAFTSTOFFENTWAESSERUNG *
-XM4 10
/118.7
-H115
indication water in
fuel filter = request
to actuate the
drain screw
-R6
fuel reservoir
sensor
0% - 100% / 2,0V - 7,0V
-Y8
Proportional valve,
ventilator drive
-X45 -X44
connector connector -A7
gear box electrics carrier electrics
-X75
inductive sensor
output speed
-A1
ECU gear box actuator with integrated
electronic gear control and directional
sensing, temperature sensor, air
pressure sensor, and speed sensor
(gear box input).
-A4
clutch actuator
with 4 solenoid control
valves and directional
sensing
-G4
pulser for tachygraph
-S119 -Y24
flow switch 2-way valve,
deficiency aux. steering pump steering circuit 2 /
(steering circuit 2) suspension, supporting rams, rear-axle steering
Drive chain:
Outline, control conditions
Diesel engine automated power shift gear
D926 TI-E A5 ZF - ASTRONIC 12 AS 2302
270 KW
Drive chain:
Transverse differential locks, activation axle 1,
wheel speed sensor - right
-S139
contact -S122
switch axle 1 contact switch
activated transv. differ.
lock axle 1
-S124
-L4 contact switch
wheel speed transv. differ. lock
sensor right- axle 2 -L2
rear wheel speed sensor, ri-fr
Drive chain:
Transverse differential locks, activation axle 1,
wheel speed sensor - left
-S160
contact switch
transv. differ. lock
axle 3
transfer
case
-L3
-L1 wheel speed
wheel speed sensor left-
sensor left- rear
front
-Y7
2-way valve,
transv. differ, lock
axles 1, 2 and 3
1 = ON
Drive chain:
Eddy current brake Telma Focal 250
-L5
eddy current
brake engine brake eddy current brake
step current
-A29
switch position
relay box
Telma
Steering:
Steering from the OW, rear-axle steering
-S131 -S151
contact switch, return contact switch,
signal rear axle return signal rear
interlock, axle interlock,
1 = released 1 = locked
-M22
E-motor,
drive steering
from the
superstructure
-Y28b
outrigger rear -Y28a
-Y33a -Y26a -Y22a left outrigger rear
supporting RETRACTING
outrigger rear rear-axle steering left
ram rear right right wheel cramp EXTENDING
DOWN EXTEND: left -Y31b -Y31a
supporting supporting
ram rear left ram rear left
UP DOWN
-Y20
floating position at
locked
rear-axle steering
-Y27a -Y32a
outrigger front supporting
right ram front
EXTENDING right DOWN
-Y27b -Y32b
outrigger front supporting
left ram front
EXTENDING right UP
Suspension:
Level sensor
-Y9a -Y9b
suspension suspension
1 = locked 1 = activated -S148 -S144
return signal return signal
suspension rear suspension proximity switch
right front right
Suspension:
axle locking valve axle 1
Axle locking valves
right
-S137
contact switch,
-Y12
axles 2 and 3 filling
locked front right
-Y18 -Y13
filling rear evacuating
right front right
-Y19
evacuating locking valves axles 2 and 3
rear right
Suspension:
Axle locking valves - left
-S354
locking valves axles 2 and 3
contact switch,
axle 1 activated
Optional equipment:
Inclination sensor
-N1
slip-ring unit
(see also OW)
-B19
inclination
sensor
Optional equipment:
External supply 230V
-F101 -A62
residual current fuse box external supply
device 230V
-X246
socket
supply 230V
Optional equipment:
Battery charger
-X56
plug-in connection for
fitting the battery charger
-G6
battery
charger
-R44
temperature sensor at
battery positive pole
0 °C = 670 Ohm
10 °C = 600 Ohm
20 °C = 511 Ohm
30 °C = 415 Ohm
Optional equipment:
Additional heater
-A50
control unit
SG1577
-A51
heater
Thermo 90S -Y34
fuel dosing pump
additional heater
40 Ohm at 20 °C
Index Carrier
BMK components
SUPERSTRUCTURE
OW-11
Kundendienst-Schulung LWE (VMS) D:\1045_1\Trennblätter_1045_1.p65
Kundendienst-Schulung LWE (VMS) 18/05/02• ED D:\1045_1\BMK-Bauteile OW_1045_1.p65
Contents: BMK OW
A ......... Sub-assemblies, partial sub-assemblies H ......... Optic and acoustic signalling devices
A1 ....... Control unit SG 1577 ........................................................................... 12 H80 ..... Warning bell, cut-off LMB .................................................................... 24
A2 ....... Heater Thermo 90S, water circulation pump ........................................ 12 H94 ..... Horn .................................................................................................... 10
H95 ..... Radio .................................................................................................. 10
B ......... Converters, electric - non electric H101 ... Charge control lamp carrier ................................................................... 7
B1 ....... Wind sensor ....................................................................................... 24 H102 ... Preheating indicator carrier ................................................................... 7
B2 ....... Pressure sensor, piston surface-luffing ram ......................................... 17 H599 ... Interval horn ballasting ......................................................................... 10
B3 ....... Pressure sensor, telescop. ram 0 - 400 bar ZE0, LSB 1 address 19 .... 17 H611 .................................................................................................................. 9
B4 ....... Length sensor ZE0, LSB 1 address 30 ................................................ 24 H612 .................................................................................................................. 9
B4 ....... Angle sensor ZE0, LSB 1 address 29 ................................................. 24 H627 .................................................................................................................. 9
B19 ..... Angle sensor, gas pedal position carrier. 0° = 4 mA 25° = 20 mA .......... 7 H628 .................................................................................................................. 9
B25 ..... Loudspeaker right ............................................................................... 10
B26 ..... Loudspeaker left.................................................................................. 10 K ......... Relays, contactors
K1 ....... Control ON .......................................................................................... 13
E ......... Lighting devices -K11 .... Control released .................................................................................. 14
E1 ....... Lighting, boom head left ...................................................................... 23 -K12 .... Control released .................................................................................. 14
E2 ....... Lighting, boom head right .................................................................... 23 -K14 .... EMERGENCY-OFF not ....................................................................... 14
E6 ....... Contour light 5W ................................................................................. 23 -K15 .... K16 = 1 ............................................................................................... 14
E7 ....... Contour light 5W ................................................................................. 23 -K16 .... Engine running ( D+ ) .......................................................................... 14
E8 ....... Working projector roof front 70W ......................................................... 23 -K18 .... Horn .................................................................................................... 14
E10 ..... Flashing light boom head .................................................................... 24 -K19 .... Fresh air blower (battery/ignition switch) ............................................. 14
E11 ..... Warning beacon 70W ......................................................................... 23 -K21 .... Working projector base section ........................................................... 14
E12 ..... Warning beacon 70W ......................................................................... 23 -K22 .... Working projector base section ........................................................... 14
E17 ..... Working projector, base section 150W ................................................ 23 -K23 .... ?EMERGENCY MODE with LICCON .................................................. 14
E18 ..... Working projector, base section 150W ................................................ 23 -K24 .... Hydraulic oil cooler -M2 „ON“ .............................................................. 14
E60 ..... Working projector ................................................................................ 23 -K34 .... Seat heating ON ................................................................................. 14
E96 ..... Working projector cab 70W ................................................................. 23 -K35 .... Air conditioner ON ............................................................................... 14
EP0 .... Input board, ZE0, LSB1 ....................................................................... 13 -K36 .... Air conditioner, compressor (high - low pressure) ................................ 14
-K37 .... Air conditioner, condensator blower 2 .................................................. 14
F ......... Fuses -K38 .... Working projector boom head ............................................................. 14
F1-F6 ............................................................................................................... 14 K651 ... Interval relay, wipe-wash ........................................................................ 9
F7-12 ............................................................................................................... 14 K652 ... Interval relay, wipe-wash ........................................................................ 9
F13-18 ............................................................................................................. 14
F19-24 ............................................................................................................. 14
F25-30 ............................................................................................................. 14
F31-36 ............................................................................................................. 14
F37-42 ............................................................................................................. 14
M ........ Electric motors S90 ..... Heater switch mechan. adjustment circulated air / fresh air .................. 11
M2 ...... Electric motor, oil cooler - hydraulic oil ................................................ 20 S91 ..... Push-button horn H94 ........................................................................... 7
M3 ...... Wiper motor front screen ..................................................................... 10 S92 ..... Bridging seat contact ............................................................................ 7
M4 ...... Wiper motor roof screen ...................................................................... 10 S103 ... Ignition switch ....................................................................................... 7
M6 ...... Roof screen wash pump behind driver’s seat ....................................... 10 S107 ... Push-button, engine OFF ...................................................................... 7
M7 ...... Front screen wash pump ..................................................................... 10 S301 ... High-speed ............................................................................................ 8
M9 ...... Water circulation pump ........................................................................ 11 S319 ... Displacement program manoeuvring mode ............................................ 8
M23 .... Actuator, working projector base section ............................................. 23 S320 ... Displacement direction FR / N / R ......................................................... 8
-S320 .. Terminal box, working projector base section ...................................... 24
N ......... Slip-ring transmitters S322 ... Release displacement program ............................................................. 8
N1 ....... Slip-ring transmitter ............................................................................. 21 S324 ... Blinker L / 0 / R ..................................................................................... 8
N3 ....... Cable drum flashing light ..................................................................... 24 S326 ... Front axle-steering L / 0 / R .................................................................. 8
NT ....... Power pack ......................................................................................... 13 S401 ... Throttle hand lever ................................................................................. 8
S422 ... Slewing brake, releasing ....................................................................... 8
P ......... Measuring instruments, test devices S424 ... Retracting boom / luffing up - at overload ............................................... 8
P2 ....... Incremental sensor winch 1 ................................................................. 18 S426 ... Rear axle-steering L / 0 / R ................................................................... 8
P654 ... Programming dial additional heater ....................................................... 9 S602 ... * Option ................................................................................................ 9
P655 ... Working hour counter ............................................................................ 9 S604 .................................................................................................................. 9
S606 .................................................................................................................. 9
R ......... Resistances S608 .................................................................................................................. 9
R11 ..... Series resistance, 39 Ohm at EMERGENCY MODE .......................... 13 S610 .................................................................................................................. 9
S626 .................................................................................................................. 9
S ......... Switches, push-buttons, limit switches S630 .................................................................................................................. 9
S4 ....... Contact switch, boom direction ........................................................... 21 S632 .................................................................................................................. 9
S26 ..... Plunger-operated switch, counterweight left „bottom“ ........................... 19 S634 .................................................................................................................. 9
S27 ..... Plunger-operated switch, counterweight left „bottom“ ........................... 19 S636 .................................................................................................................. 9
S28 ..... Manometric switch > 200 bar counterweight left „top“ .......................... 19 S638 .................................................................................................................. 9
S29 ..... Manometric switch > 200 bar counterweight right „top“ ........................ 19 S640 .................................................................................................................. 9
S30 ..... Interlock superstructure pin bottom ..................................................... 21 S642 .................................................................................................................. 9
S31 ..... Temperature switch, hydraulic oil ........................................................ 20 S644 .................................................................................................................. 9
S32 ..... Interlock superstructure pin top ........................................................... 21 S646 .................................................................................................................. 9
S39 ..... Manom. switch, extending boom p > 5,5 bar = 1 ................................ 16 S656 .................................................................................................................. 9
S50 ..... Manometric switch, no crane function = 1 ........................................... 17 S658 .................................................................................................................. 9
S69 ..... Proximity switch, grease distributor .................................................... 22 S660 .................................................................................................................. 9
S83 ..... Thermostatic switch, water circulation behind additional heater ........... 12 S930 ... Lift top boom head right ZE0, LSB 1 address 28 ................................. 25
S84 ..... EMERGENCY-STOP, cab (engine-stop) .............................................. 10 S931 ... Lift top pulley set special aux. jib ZE0, LSB 1 address 25 ................... 25
S89 ..... Step switch, blower heat exchanger ..................................................... 11 S940 ... Lift top KS ZE0, LSB 1 address 27 ..................................................... 26
S945 ... Lift top DKS ZE0, LSB 1 address 26 ................................................... 26
Instruments cabin:
Liccon monitor, pedal
-S103
-H101 ignition switch
charge control 0 = OFF
indicator 1 = ignition ON (LICCON ON)
carrier 2 = engine carrier ON
Instruments cabin:
Master switches
-S401 -S301
hand throttle high-speed
ratio
-S322
release
-S422 displacement
release program
slewing brake
-S424 -S319
-S324 displacement
retracting boom / blinker
luffing up - program
L/0/R manoeuvring
at overload
mode
Instruments cabin:
Roof console
* option -H627
-H611
Crane cab:
Wiper-, radio installation, EMERGENCY-OFF
-M3
wiper motor
front screen
-S84
EMERGENCY-
OFF,
cab
(engine-stop)
-B25
loudspeaker
right
-M4
wiper motor
roof -H94
horn
-B26
loudspeaker
-H599 left
interval horn
ballasting
behind
-X519 driver’s seat
socket
cab
-H95
radio
-M7 -M6
front screen roof screen
wash pump wash pump
Crane cab:
Heater, add. heater
heat exchanger
warm cold
additional
heater
THERMO 90
-X298
socket
ventilator
230V
cab
-Y28
water circulation,
behind add. heater 0 = engine and cab,
1 = engine
-Y139
fuel
dosing pump
addition. heater
Control cabinet:
Control ON, voltage converters, ZE, NT, EP -EP0
input board,
ZE0, LSB1
-R11
-T50 series resistance, 39
voltage converter Ohm at EMERGENCY
-NT -ZE0 24V / 12V - 3A -K1 MODE for Y17-
power central unit radio control ON pressure reduction -
pack extending boom
-X45
Control cabinet: -K11 control released -K22 Working projector base section
Relays, -K12 control released -K23 ?EMERGENCY MODE with LICCON
-K14 EMERGENCY-OFF not -K24 Hydraulic oil cooler -M2 „ON“
fuses -K15 K16 = 1 -K34 Seat heating ON
-K16 Engine running ( D+ ) -K35 Air conditioner ON
-K18 Horn -K36 Air conditioner, compressor (high-low pressure)
-K19 Fresh air blower (battery/ignition switch) -K37 Air conditioner, capacitor blower 2
-K21 Working projector base section -K38 Working projector boom head
hoist gear
brake releasing valve
-Y2
LMB cut-off
luffing UP
RETRACT. tele
-Y1
LMB cut-off
hoist gear 1 lifting,
luffing DOWN,
EXTEND. tele
-Y6
1 = high-speed = 24 bar on PST2,
0 = normal speed = 16,5 bar on
PST2
-Y3
cut-off - winch 1 unwound at
hoist gear 1 lowering
diaphragm accumulator
control pressure PST1,
initial pressure 10bar
-S39
manometric switch,
extending boom
p > 5,5 bar = 1
P
EXTEND.. tele
300
A
-Y17
Y
B to piston
surface
tele ram
-Y17
pressure reduction
valve,
EXTEND. tele
-S50
manometric switch 5,5E,
no crane function = 1
shuttle valve
block
-Y50
compensating
cylinder
-Y51
activation pump
-B3
pressure sensor,
telescoping ram
0 - 400 bar
ZE0, LSB 1 address 19
(only at re-alimentation tele)
tele
pin
-B2
pressure sensor,
piston surface-luffing ram
0 - 300 bar
ZE0, LSB 1 address 20
winch 1
-Y20
releasing static
brake slewing
gear
-P2
Incremental
sensor winch 1
winch
incremental sensor empty adjusting switch
-Y19b -Y19a
counterweight counterweight
DOWN UP
-S27 -S29
plunger-operated
switch manometric
counterweight switch
right „bottom“ > 200 bar
-S28 -S26 counterweight
manometric right „top“
plunger-operated
switch switch
> 200 bar counterweight left
counterweight left „bottom“
„top“
-M2 -X205
electric motor, -S31
hydraulic oil temperature switch,
cooler hydraulic oil
> approx. 50°C = 1
< approx. 45 °C = 0
FUNCTION
pin bottom
pin p6° over rear=>
bottom superstructure locked
over rear
pin pin bottom, not
flashing p6° over rear=>
bottom superstructure locked
boom over
rear +-5° pin pin top =>
top superstructure unlocked
pin
pin
flashing
intermediate position
top
ERROR
ERROR
ERROR
ERROR
-S4 -N1
contact switch, slip-ring -Y22 -Y23
boom direction transmitter interlocking unlocking
superstructure superstructure
under cab
-S32 -S30
superstructure superstructure
interlocking interlocking
pin top pin bottom
Superstructure, general:
Centralized lubricating system
-X268
connector -X269
control unit connector on S69
-S69 -Y69
proximity switch
grease distributer centralized
lubricating system
Superstructure, general:
Lighting superstructure
-E1
lighting,
-E8 boom head left
working projector
roof front 70W
-E2
lighting
boom head right
-E11 -E12
warning beacon warning beacon
70W 70W
-E60 -E96
working projector working
projector
cab 70W
-E6 -E7
contour contour
light light
5W 5W
Telescopic boom:
-B4 -B4
Wind sensor, length-angle sensor, distribution box angle sensor length sensor -N3
ZE0, LSB 1 ZE0, LSB 1 cable drum
address 29 address 30 flashing light
-S320
terminal box,
working projector -H80
base section
warning bell,
cut-off LMB
-E10 -B1
flashing light wind sensor
boom head
Telescopic boom:
Hoist limit switches - pulley head and special auxiliary jib
-S931
lift top
pulley set
special auxiliary jib
ZE0, LSB 1 address 25
-X417
plug-in connection
S930
-S930
lift top
boom head right
ZE0, LSB 1 address 28
Telescopic boom:
Hoist limit switches - swing-away and biparted swing-
away jib
-X501
-X502 plug-in connection
plug-in connection S940
S945
-S945 -S940
lift top lift top
DKS KS
ZE0, LSB 1 address 26 ZE0, LSB 1 address 27
OW-10
Kundendienst-Schulung LWE (VMS) D:\1045_1\Trennblätter_1045_1.p65