Professional Documents
Culture Documents
As 124157 SZ-V Um C31GB WW GB 2121 1
As 124157 SZ-V Um C31GB WW GB 2121 1
Troubleshooting
“Muting lamp output” (page 56)
Please check the following:
If the muting lamp output is correctly
Muting Lamp Alert (Overcurrent) connected to the muting lamp
Muting lamp
Normal 14 0002
The muting lamp connected to the muting If the muting lamp is broken
Over current lamp output has an overcurrent exceeding If the rating/specification of the muting
the rated current. lamp is within the range of the muting lamp
output?
“Muting lamp output” (page 56)
Camera error
Camera (Head 1) Normal 14 0600 An error has occurred with the camera area
Green or red of scanner head 1.
Camera error Turn the power of the SZ-V off and then on
Camera (Head 2) Normal 14 0A00 An error has occurred with the camera area again. If turning the power back on does not
of scanner head 2. resolve the error, replace the scanner head.
Camera error
Camera (Head 3) Normal 14 0E00 An error has occurred with the camera area
of scanner head 3.
Detection History Error
Transfer the settings again. If that does not
History Store Normal 14 0200 The detection history cannot be retrieved
resolve the error, replace the display unit.
correctly.
Detection history error
History Store
Normal 14 0601 The detection history for scanner head 1
(Head1)
cannot be retrieved correctly.
Detection history error
History Store Transfer the settings again. If that does not
Normal 14 0A01 The detection history for scanner head 2
(Head 2) resolve the error, replace the scanner head.
cannot be retrieved correctly.
Detection history error
History Store
Normal 14 0E01 The detection history for scanner head 3
(Head 3)
cannot be retrieved correctly.
The method to recover from an error differs depending on the error type.
Error 1: The SZ-V automatically returns to normal operation if the cause of the error is removed.
Error 2: The SZ-V returns to normal operation if the cause of the error is removed and the SZ-V is reset.
Error 3: The SZ-V returns to normal operation if the cause of the error is removed, and power is turned off and back on again.
The number
of pulses for
Background
Display state Type state Code Details Countermeasures
Color information
output
Window error
Error 1 0410 The window of scanner head 1 may be polluted
Window Error or scratched.
15
(Head1)
Window error
Error 3 0421
The window of scanner head 1 may be broken.
Window error Clean the window in accordance with
Error 1 0810 The window of scanner head 2 may be polluted “Cleaning the Window” (page 148). If the
Window Error or scratched.
Red 15 error continues after cleaning, replace the
(Head 2)
Window error window in accordance with “Replacing the
Error 3 0821
The window of scanner head 2 may be broken. Window” (page 148).
Window error
Error 1 0C10 The window of scanner head 3 may be polluted
Window Error or scratched.
15
(Head 3)
Window error
Error 3 0C21
The window of scanner head 3 may be broken.
MI error (man-made interference error)
MI Error (Head 1) Error 1 16 0411 (1) A structure with extremely low reflectance is
(1) Remove the structure with low
located close to the SZ-V.
reflectance close to the SZ-V.
(2) The SZ-V does not detect any diffuse
11
MI Error (Head 2) Red Error 1 16 0811 (2) Position a structure outside the
reflection from the object to be detected or the
protection zone so that the SZ-V detects
structure outside the protection zone. The SZ-V
diffuse reflection from the structure.
MI Error (Head 3) Error 1 16 0C11 generates an error if it does not detect anything
over 60 degrees.
Troubleshooting
OSSD 1 Error Error 2 18 0010 OSSD error (1) Check the wiring for the OSSD. “Wiring”
(1) The OSSD is short-circuited. Alternatively, (page 30)
OSSD 2 Error Error 2 18 0011 the wiring is wrong. (2) Use a load with a surge absorber
(2) The OSSD experienced a surge in voltage function, or apply surge protection to the
Red
due to an inductive load. load.
OSSD 3 Error Error 2 18 0012 (3) The OSSD is being affected by an EMC (3) Check the surrounding wiring and EMC
environment. environment.
OSSD 4 Error Error 2 18 0013 (4) The OSSD is broken. (4) Replace the display unit.
11
power capacity, or prepare a
(3) The power voltage is temporarily or
SZ-V-dedicated power source.
continuously falling.
Unused Wiring Error (Input 2)
Incorrect Wiring If Input 2 is set to unused, make an open
Red Error 2 19 0028 Input 2 is set as unused but is not in an open
Troubleshooting
Error (input2) circuit on Input 2 with insulation.
circuit.
Unused Wiring Error (Input 6)
Incorrect Wiring If Input 6 is set to unused, make an open
Red Error 2 19 0029 Input 6 is set as unused but is not in an open
Error (input6) circuit on Input 6 with insulation.
circuit.
System Memory Error (Type)
System Memory
Red Error 3 19 0030 The display unit type does not match the settings Check the display unit type.
Error (Type)
in the system memory.