Professional Documents
Culture Documents
Unrestricted www.siemens.com/sinamics-G120X
Solution Highlights
Solution Highlights
EMC compliant (C1 + C2) and • Grid friendly design with reduced
integrated full DC-link choke harmonics and long cable length
• Reduced electromechanical
Safe Torque Off SIL 3 hardware components and standard compliant
• Fit for digitalization and for cloud
Compatible with SINAMICS connect
and TIA Portal via GSD file
based analytics
• PLC connectivity as a standard
Frame size C with SAM Pluggable I/O terminal hardware and • Simple installation, service and
optional repair switch (for IP55/UL122)
maintenance
IOP-2: Intelligent Operator Panel 1 Refer to the manual
Unrestricted © Siemens AG 2018 2 Available
SAM: Smart Access Module on 12/2019
Page 7 3 max. 55 ˚C for Profinet version V0.10.7
The G120X offers different protection degrees with a
seamless system approach up to 630 kW / 700HP
Blocksize Chassis
IP20 /IP21 kit2,3/
H J
Operator Wi-Fi Options
IP20 Push Through Panel Webserver
G
kit3 F SD card
UL open type E
Voltage / Power Power: C D incl. or
Power range
AB
Range 0.75 – 560 kW kW up to… IP21 roof
top kit
1 – 700 HP IOP-2/ BOP-2 SAM
3AC200 – 230V1
2nd–step
(0.75 55 kW / Wall mounted IP20 / UL open
1 – 75 HP) push through kit
(IP21 UL-type 1)1
3AC380 – 480V Power: F 1
C D E I/O ext. module
2 nd step
(0.75 – 560 kW / 0.75 – 132 kW Power range A B incl. or I/O
3AC500 – 690V
2nd step
Passive
(3 – 630 kW / Wall mounted harmonic filter THDi
4 – 700 HP) <5%
(IP55 UL-type 12)1
Power: F Choke
C D E incl. or
0.75 – 132 kW Power range B
1 – 200 HP kW up to…
Sinus filter
du/dt filter
1 Available
on 12/2019 3 IP21 kit/ IP20 PT-kit FS A-G as an orderable option SAM: Smart Access Module
Unrestricted © Siemens AG 2018 2 Wall mounted w/o cabinet in lockable electrical room IOP: Intelligent Operator Panel
Page 8 V0.10.7
SINAMICS G120X
Technical data – Seamless power range
Voltage /
3AC 380 – 480V Connectable with e.g. sinus filter and
Power 0.75 – 560 kW / 1 – 700 HP DC – LINK
Range -20%/+10% external braking units
System advantages
The certified integrated safety
STO SIL 3 HW helps to ensure
Management
Building management protection of personnel, machinery
system and processes
Ethernet IP
Automation
DDC Primary automation
station
Easy engineering and simple
setup via SAM or IOP-2
RTU MS/TP
Wi-Fi G120X
Field level
Frequency inverter,
motor, sensors, …
+ Real-time clock enables time
depending functions
STO SIL 3
Commissioning via
+ Simplifies diagnostics via time stamp
IOP-2 and SAM alarms and faults
DCC: Direct Digital Control 1 Profibus, USS/Modbus RTU, PCS7 available during 2019
Unrestricted © Siemens AG 2018
Page 11
BACnet® is a registered trademark of ASHRAE V0.10.7
SINAMICS G120X brings the best pump and fan control
ensuring energy-saving and protection
Multi-pump STO
Pipe filling PID Hibernation Condensation
control SIL 3
protection
Power on
Keep-running mode Multi-speed set point
Frost protection
Dual ramp ON/OFF2
Fire mode Rotation monitoring w. sensor
Wide range of tools allow easy selection and configuration of the drive system
1Available during 2019
Unrestricted © Siemens AG 2018
Page 13 V0.10.7
A wide range of services is offered as an additional value
during the entire G120X product lifecycle
www.siemens.com/sinamics-G120X
Subject to changes and errors. The information given in this document only contains general descriptions and/or performance features which may
not always specifically reflect those described, or which may undergo modification in the course of further development of the products. The requested
performance features are binding only when they are expressly agreed upon in the concluded contract.
All product designations, product names, etc. may contain trademarks or other rights of Siemens AG, its affiliated companies or third parties.
Their unauthorized use may infringe the rights of the respective owner.
siemens.com