Professional Documents
Culture Documents
Module 1 HW 2
Module 1 HW 2
HW1
1. Use the Golden Ratio to divide a line segment L with length 25 meters into two segments L1 and
L2. What is the length L1?
If a line segment is split into two lengths, the ratio of the full length of the segment to the longer length
equals the number of the longer length to the lower length. Following that, the segment was divided
into the golden ratio.
If a line segment is split into two lengths, the ratio of the full length of the segment to the longer length
equals the number of the longer length to the lower length. Following that, the segment was divided
into the golden ratio.
This study source was downloaded by 100000867853096 from CourseHero.com on 06-01-2023 22:35:53 GMT -05:00
https://www.coursehero.com/file/105661259/MODULE-1-HW-2docx/
where; L1 = AC AB = AC
AB = 25 meters AC CB
<---------- 25 ----------->
A <--L1-->C B
25/L1 = L1/25-L1
2
25(25-L1) = L1
= 15.4508972
L1 = 15.45 meters
2. Construct a golden spiral that involves a golden rectangle with length 4 inches.
This study source was downloaded by 100000867853096 from CourseHero.com on 06-01-2023 22:35:53 GMT -05:00
https://www.coursehero.com/file/105661259/MODULE-1-HW-2docx/
Procedure:
Make a square ABCD with a 4in side length. Take the perpendicular bisector of AB, which will
yield a point M as AB's midpoint. Connect M' and C. Make a curve and extend AB, using M'C as the
radius and M' as the center. These two will meet at E. At E, the continuation of DC and the perpendicular
to BE will meet.
With E as the center and EB as the radius, a curve is formed that will meet EF at G. Cut BC at H
perpendicular to EF at G. F as middle and FG as radius, curve intersect CF at I. perpendicular to CF at I cut
GH at J. C and center and CI as radius, curving intersect CH at K. perpendicular to CF at I cut GH at J. C as
center and CI as radius, curve meet CH at K. Cut IJ at L perpendicular to CH at K. With H as the center and
HK as the radius, the curve intersects JH at M. Cut KL at N perpendicular to JH at M. J as the center and
MJ as the radius, curve cut LJ at O. perpendicular to LJ at O cut MN at P, and so on.
Set C as the center and CD as the radius of the golden spiral, then bend D to B. Curve B to G has H as the
center and HB as the radius. Curve G to I has J as the center and JG as the radius. Curve I to K has L as the
center and LI as the radius. Curve K to M has N as the center and NK as the radius. Curve M to O has P as
the center and PM as the radius. And so forth.
3. (Other doc)
4. Use the Golden Ratio to divide a line segment L with length 25 meters into two segments
L1 and L2. What is the length L2?
where; L1 = AC AB = AC
AB = 25 meters AC CB
<---------- 25 ----------->
A <--L1-->C B
25/L1 = L1/25-L1
2
25(25-L1) = L1
This study source was downloaded by 100000867853096 from CourseHero.com on 06-01-2023 22:35:53 GMT -05:00
https://www.coursehero.com/file/105661259/MODULE-1-HW-2docx/
= -(25)/2 + 25 square root of "5"/2 (means the length is always positive)
= 15.4508972
L1 = 15.45 meters
For L2:
L2 = 25 – L1
= 25 m – 15.45 m
L2= 9.55 m
This study source was downloaded by 100000867853096 from CourseHero.com on 06-01-2023 22:35:53 GMT -05:00
https://www.coursehero.com/file/105661259/MODULE-1-HW-2docx/
Powered by TCPDF (www.tcpdf.org)