Professional Documents
Culture Documents
Settings
COP 1838+ / 1838HD+ / 1838AW+ Ver. F
Worksite: ___________________________________________________________________
Drill rig type: ___________ Serial No.: ___________ Manufacturing No.: ___________ Feed No.: __
COP: ___________ Serial No.: AVO _____________ Rotation motor size: _____________
Make sure the hydraulic oil have reached normal working temperature before adjusting the base settings.
The rock drill pressures in this document refers to the pressure at the rock drill intakes. The hydraulic
pressure at the operator panel is usually 5-10 bar above the pressure at the rock drill.
Lubricating air pressure at rock drill 3 bar > 2.5 bar . . . . . . . . . . bar
……………………………………………… …………………..
Service engineer in charge No. Date
TIS0004044-001.en